Success!

Successfully saved your search
Advantage ICF System® Plasti-Fab Ltd. The Advantage ICF System is a patented insulating concrete forming system consisting of two layers of expanded polystyrene (EPS) insulation connected with a web molded into the EPS insulation. • Patented design. • Interlock aligned ties. • Strongest 8” c...view more The Advantage ICF System is a patented insulating concrete forming system consisting of two layers of expanded polystyrene (EPS) insulation connected with a web molded into the EPS insulation. • Patented design. • Interlock aligned ties. • Strongest 8” corner. • Height adjuster T - block. • Clearly marked attachment. When the installed Advantage ICF System blocks are filled with concrete, an insulated, monolithic concrete wall of uniform thickness is formed. The result is superior, energy efficient wall that will provide long-term energy cost savings and add resale value to the building. view less
AKOUSTI-LINER R® Rigid Duct Liner Manson Insulation Products Ltd. Heavy density fiber glass board designed as an interior insulation material for use in HVAC ductwork and plenums. Faced with a black mat on the airstream surface.
AKOUSTI-LINER® Flexible Duct Liner Manson Insulation Products Ltd. Thermal and acoustical fiber glass blanket designed as an interior insulation material for use in HVAC ductwork. Faced with a black mat on the airstream surface and offered with or without edge coating.
ALLEY WRAP™ Fiberglass Duct Wrap Manson Insulation Products Ltd. Thermal and acoustical fiber glass blanket for use as external insulation on HVAC rectangular or round ductwork. Available plain or with foil-scrim-kraft (FSK) vapor retarder facing.
ALLEY-K™ Fiberglass Pipe Insulation Manson Insulation Products Ltd. Molded, one-piece fiber glass pipe insulation with or without ASJ jacket and self-sealing-lap closure system for use up to 850 F.
ALUAFS.70 FORTE GREEN AFS BORU SANAYI A.S. ALUAFS.70 FORTE GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE GREEN is produced from multi-layer alumin...view more ALUAFS.70 FORTE GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 FORTE GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C view less
ALUAFS.70 FORTE RECTANGULAR GREEN AFS BORU SANAYI A.S. ALUAFS.70 FORTE RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE RECTANGULAR GREEN...view more ALUAFS.70 FORTE RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE RECTANGULAR GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 FORTE RECTANGULAR GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Wire Pitch: 18 mm (if Ø is greater than or equal to 102 mm) Temperature Range: -30 °C / +150 °C view less
ALUAFS.70 GREEN AFS BORU SANAYI A.S. ALUAFS.70 GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN is produced from multi-layer aluminium and poly...view more ALUAFS.70 GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C view less
ALUAFS.70 GREEN UL AFS BORU SANAYI A.S. ALUAFS.70 GREEN UL non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN UL is produced from multi-laye...view more ALUAFS.70 GREEN UL non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN UL is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 GREEN UL has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 254 mm Temperature Range: -30 °C / +150 °C view less
ALUAFS.F GREEN AFS BORU SANAYI A.S. ALUAFS.F GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F GREEN is produced from multi-layer aluminium and polyes...view more ALUAFS.F GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 1 ply polyester Available Diameters: 82 mm - 800 mm Temperature Range: -30 °C / +250 °C view less
Ameriflex Silver Metalized Commercial Core Hart & Cooley, Inc. Ameriflex Silver Metalized Commercial Core
Ameriflex Uninsulated High Pressure Air Connector Hart & Cooley, Inc. Ameriflex Uninsulated High Pressure Air Connector
AMG Flex™ Duct Quietflex Manufacturing Company The inner core is coated with Agion® Antimicrobial Technology which resists mold-fungus growth • Johns Manville Formaldehyde-Free Insulation • Effective Against a Broad Spectrum of Bacteria • Available in R–6.0 and R–8.0 • Galvanized Metal Core Reinforci...view more The inner core is coated with Agion® Antimicrobial Technology which resists mold-fungus growth • Johns Manville Formaldehyde-Free Insulation • Effective Against a Broad Spectrum of Bacteria • Available in R–6.0 and R–8.0 • Galvanized Metal Core Reinforcing • Oversized Core to Fit on Collars and Register Boxes • Weather Resistant Bag Packaging view less
AP Armaflex Armacell, LLC AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation....view more AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) • AP Armaflex Roll is supplied in 48" wide (1.22m) continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38 and 50mm). Also available in 60" (1.53m) in 1" thickness. Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet & Roll Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex (Damman Saudi Arabia) Armacell, LLC AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is ma...view more AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex - White Armacell, LLC Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structu...view more Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structure of AP Armaflex W prevents moisture from wicking and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, dust free, fiber free and resists mold and mildew. Microban antimicrobial product protection provides added defense against mold on the insulation. AP Armaflex W is engineered for residential and commercial air conditioning and commercial refrigeration applications in which speed and ease of installation are of primary importance, especially in open ceiling facilities. AP Armaflex W is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +220°F (-183°C to +105°C). AP/Armaflex White meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex Fittings Armacell, LLC Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water a...view more Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water and refrigeration systems. AP Armaflex black fabricated fittings provide thermal protection (0.25 k) and condensation resistance (0.05 Water Vapor Transmission factor), with all other AP Armaflex performance advantages. 1/2", 3/4", 1", 1-1/2" and 2" wall thicknesses for 2-piece and 3-piece 90° elbows, tees and 45° elbows. 1", 1-1/2" and 2" thicknesses for grooved fittings, with couplings. view less
AP Armaflex – Self Adhering Sheets & Rolls Armacell, LLC Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", ...view more Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (6, 10, 13, 19, 25, 38, 50mm). • Rolls are supplied in 48" (1.22m) wide continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38, 50mm). It is also available in 60" (1.53m) in 1" thicknesses. The expanded closed-cell structure of Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or CFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP Armaflex SA is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex SA Sheet Insulation is -297°F to +180°F (-183°C to +82°C). AP/Armaflex SA meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. view less
AP Armaflex – Self Seal Tubes Armacell, LLC Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell...view more Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell structure of AP Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP/Armaflex SS meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. AP Armaflex SS Pipe Insulation is used to retard heat gain and control condensation drip from chilled-water and refrigeration lines. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
AP Coilflex Armacell, LLC AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency ...view more AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency for use in air ducts (EPA Reg. No. 1258-840-42182). It is added during manufacturing to provide an extra level of defense to the natural mold resistance of AP Coilflex. AP Coilflex is effective for reducing HVAC noise. It is supplied in rolls 46", 47", 48", 56-1/4", 59" and 60" wide, in 1" (or 1/2" special order) thicknesses. It can be applied with current water-based adhesives and pinning per SMACNA requirements or unpinned using Armaflex 520 Adhesives. AP Coilflex Duct Liner, like AP Armaflex Duct Liners, is ideal for air handling systems, VAV units, ducts and other air system components requiring condensation control and resistance to moisture, damage or heat gain. They also reduce noise generated by fans and air movement as well as the rattle or popping of sheet metal air ducts. Coilflex is especially effective factory-applied, including on automated coiling lines, for end use in areas like schools, hospitals, hotels, commercial and public buildings. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
AP Spiralflex Armacell, LLC AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solut...view more AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solution that meets their clients’ requirements for indoor air quality (IAQ), noise attenuation, and thermal efficiency. Made from highly conformable elastomeric foam, AP Spiralflex cuts easily with a sharp knife. Its smooth and flexible backing fits snugly against the duct wall, without the typical gaps that rob conventional insulation systems of their efficiency. Installation is a simple matter of forming a correctly sized AP Spiralflex tube with one glued and taped seam, then inserting it into spiral duct sections. The end result is a more precise insulation application that weighs 20% less than dual wall ducts with fiber-glass. AP Spiralflex is made in Mebane, NC and is available in 48” wide, (nominal) 1” thick rolls. • Meets ASHRAE 90.1-2010 • Meets ASHRAE Standard 189.1 • Meets IECC 2012 • Meets California Title 24 • Meets ASTM E 84 25/50 flame and smoke rating • Made with Microban antimicrobial technology to resist the growth of mold. • GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage view less
Arcticflex Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. •...view more Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products It is white in color and available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of , 1/2" and 1". Arcticflex is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B. view less
Armaduct™ DL Armacell ASIA Pte Ltd Armaduct™ DL is a highly conformable,pliable elastomeric thermal insulation, which is effective for reducing HVAC noise and free of fiber. The Microban antimicrobial protection is registered by the Environment Protection Agency for use in air ducts. It's ...view more Armaduct™ DL is a highly conformable,pliable elastomeric thermal insulation, which is effective for reducing HVAC noise and free of fiber. The Microban antimicrobial protection is registered by the Environment Protection Agency for use in air ducts. It's added during manufacturing to provide an extra level of defense to the natural mold resistance of Armaduct™ DL. Armaduct™ DL is ideal for air handling systems,VAV unites, ducts and other air system components requiring condensation control and resistance to moisture, damage or heat gain. They also reduce noise generated by fans and air movement as well as the rattle or popping of sheet metal air ducts. It is especially effective factory-applied,including on automated coiling lines, for end use in areas like schools,hospitals,hotels commercial and public building. view less
Armaflex Endura® Armacell ASIA Pte Ltd Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resili...view more Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resilience against water vapour ingress and built-in antimicrobial protection, it is the preferred choice for commercial, residential and public buildings such as hospitals, schools and elder housing. view less
Armaflex® AD0 Armacell ASIA Pte Ltd Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes ...view more Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® AD0 is the preferred choice for effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex AD0 is -50°C to +85°C for flat surface. Armaflex® AD0 is available as sheets, both continuous rolls as well as flat sheets. view less
Armaflex® AMP Armacell ASIA Pte Ltd Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses....view more Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses. With built-in antimicrobial protection, this fibre-free insulation material helps to offer better indoor air quality. view less
Armaflex® Class 0 Armacell ASIA Pte Ltd Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Hence, Armaflex® Class 0 is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® Class 0 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® Class 0 Plus Armacell ASIA Pte Ltd Armaflex® Class 0 Plus is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® Class 0 Plus emits very low levels of VOCs. The closed-cell structure makes it an efficient insulat...view more Armaflex® Class 0 Plus is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® Class 0 Plus emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Hence, Armaflex® Class 0 Plus is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® Class 0 is 7°C to +85°C. view less
Armaflex® Class 0 with self-adhesive Armacell ASIA Pte Ltd Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels ...view more Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Armaflex® Class 0 with self-adhesive is a quick and easy-to-install insulation material with excellent condensation control and energy saving performance. The recommended service temperature range for Armaflex® Class 0 sheet is -50°C to +85°C. Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® Class 1 Armacell ASIA Pte Ltd Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an effic...view more Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. Armaflex® Class 1 offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® Class1 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 1 is available as sheets – continuous rolls or flat sheets as well as tubes. view less
Armaflex® DS Armacell ASIA Pte Ltd Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® ...view more Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® antimicrobial additive is built into the structure of the insulation foam, and would not fade or wash away over time, providing reliable protection against mold and mildew growth. Similar to other products in the Armaflex® range, closed-cell Armaflex® DS is the ideal choice for HVAC systems due to its excellent resistance against water vapor ingress and thermal conductivity. Armaflex® DS is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® FRV Armacell ASIA Pte Ltd Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® FRV is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® FRV is -50°C to +105°C. (+85°C for flat surface). view less
Armaflex® MC Armacell ASIA Pte Ltd Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built...view more Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Armaflex® MC offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® MC is -50°C to +105°C. (+85°C for flat surface). Armaflex® MC is available as sheets – continuous rolls and flat sheets as well as tubes. view less
ArmaTuff Armacell, LLC ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant fl...view more ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant flexible elastomeric thermal insulation. Its closed-cell structure prevents condensation and moisture wicking, and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is available in 36” x 48” sheets (with or without pressure sensitive adhesive) and in rolls 48” wide (without PSA), in thicknesses up to 2” ArmaTuff is designed to be used for all exterior applications: Exterior ducts, tanks, vessels, large pipes and fittings. The laminate is resistant to UV, ozone, acid rain and most industrial pollutants. No painting is required. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
ASJ Max FIBERGLAS™ Pipe Insulation Owens Corning The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistan...view more The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistance and less wicking/curling than standard ASJ. It accepts paint and mastic as well as standard ASJ. The SSL® Max closure system was designed with advanced adhesives to work specifically with the jacket to provide a tight, reliable seal that doesn’t need glue or staples. It provides an outstanding long-term bond as the acrylic adhesive “grows” on the jacket during the 48-hour wet out period. The maximum operating temperature is 1,000°F. It is available in a variety of size/thickness combinations, including select metric sizes, for use with Aquatherm® piping systems. Aquatherm® is a registered trademark of Aquatherm GmbH. view less
ATCO Flexible Duct ATCO Rubber Products, Inc. Shown are our three most popular insulated flexible ducts. All are UL 181, Class 1 Air Ducts, constructed of a tough black inner core, and surrounded by a thick blanket of fiberglass insulation. Each has a unique outer vapor barrier allowing you to choose...view more Shown are our three most popular insulated flexible ducts. All are UL 181, Class 1 Air Ducts, constructed of a tough black inner core, and surrounded by a thick blanket of fiberglass insulation. Each has a unique outer vapor barrier allowing you to choose just the right product for your HVAC application. Insulation values available: R-4.2, R-6.0, and R-8.0 view less
Atmosphere Duct Liner with ECOSE® Technology Knauf Insulation Thermal and acoustical glass mineral wool blanket designed as an interior insulation material for use in HVAC ductwork. Faced with a tightly bonded mat on the airstream surface and encapsulant edge coating.
Atmosphere Duct Wrap with ECOSE Technology Knauf Insulation Thermal and acoustical glass mineral wool blanket for use as external insulation on HVAC rectangular or round ductwork. Available plain, or with FSK, white PSK or black PSK vapor retarder facings.
Attic Stairway Insulator Owens Corning The Owens Corning Attic Stairway Insulator (ASI) is designed to insulate attics with pull down stairways with an R-value or 10. The ASI is comprised of 3.2” VersaMat with a foil facing attached using a dry lamination process. This light weight product is ...view more The Owens Corning Attic Stairway Insulator (ASI) is designed to insulate attics with pull down stairways with an R-value or 10. The ASI is comprised of 3.2” VersaMat with a foil facing attached using a dry lamination process. This light weight product is easy to install and remove, and reduces heat loss in the winter and heat gain in the summer. view less
Black Polyethylene Duct Gray Flex Systems, Inc. Gray Flex’s flexible ducts are tested in accordance with U.L. 181 and approved for use as a Class 1 air duct material. Jacketing is printed with certification label, size and performance data every 24”. Foot markers are provided every 12”. Black flexible ...view more Gray Flex’s flexible ducts are tested in accordance with U.L. 181 and approved for use as a Class 1 air duct material. Jacketing is printed with certification label, size and performance data every 24”. Foot markers are provided every 12”. Black flexible duct is manufactured from black polyethylene and comes in three R-Values; R-4.2 (GF), R-6.0 (GF-6), and R-8.0 (GF-8). Black flexible duct comes with our exclusive patented air tight, reinforced inner liner core. Black flexible duct is available in standard sizes from 4” to 20”, in lengths of 25’ or 50’. Black flexible duct is designed for indoor use only. Visit our web site or contact us for Specification Sheets. view less
Cabin Air Filters MicronAir / Freudenberg Filtration Technologies, L.P. Freudenberg's micronAir Cabin Air Filters clean the air entering the vehicles passenger cabin through the air conditioning system. There are two types of cabin air filters, particle and combination. Particle cabin air filters remove dust, pollen, and soot...view more Freudenberg's micronAir Cabin Air Filters clean the air entering the vehicles passenger cabin through the air conditioning system. There are two types of cabin air filters, particle and combination. Particle cabin air filters remove dust, pollen, and soot from the air. Combination filters also clean the air in addition to eliminating outside odors from entering the passenger compartment. For more information regarding micronAir® cabin air filters, call Randall Michael @ 270-887-5128 or visit our web site www.micronair.us. view less
CELdek® Munters Corporation CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration. Our cross fluted, unequal...view more CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration. Our cross fluted, unequal angle pad design promotes the beneficial mixing of air and water for optimum cooling. This unique design also functions to continually direct more water to the air entering face of the pad, where the air is the hottest, driest, dirtiest and the most intense evaporation occurs. view less
CELdek® 5090 Munters Corporation CELdek® 5090 evaporative cooling pad is used in systems where high efficiency cooling is required. It can be used for many different cooling purposes but is particularly suitable for evaporative coolers for commercial and domestic use. The pad consists of...view more CELdek® 5090 evaporative cooling pad is used in systems where high efficiency cooling is required. It can be used for many different cooling purposes but is particularly suitable for evaporative coolers for commercial and domestic use. The pad consists of specially impregnated and corrugated cellulose paper sheets with flute angles (45 deg) that have been bonded together. This unique design yields a cooling pad with high evaporation efficiency while still operating with a very low pressure drop. In addition, scaling is kept to a minimum and no water carryover occurs due to the fact that the water is directed to the air inlet side of the pad. This is where most of the evaporation takes place. The impregnation procedure for the cellulose paper ensures a strong self sup-porting product, with high absorbance, which is protected against decomposition and rotting and therefore increasing longevity. The distribution pad constitutes a vital part of a complete system and should always be ordered in combination with CELdek evaporative cooling pads. Placed on top of the cooling pad it ensures a uniform supply of the water to the cooling pad and minimises the risk of dry spots. view less
CELdek® with Mi-T-edg Munters Corporation MI-T-edg™ by Munters is a tough and resilient optional edge treatment applied to the air entering face of a CELdek pad. It has been formulated to withstand repeated cleaning without damaging the pad. MI-T-edg is nonporous and quick drying. It prevents alg...view more MI-T-edg™ by Munters is a tough and resilient optional edge treatment applied to the air entering face of a CELdek pad. It has been formulated to withstand repeated cleaning without damaging the pad. MI-T-edg is nonporous and quick drying. It prevents algae and minerals from anchoring themselves into the substrate of the pad, so they fall off when dried. MI-T-edg also protects CELdek pads from the damaging effects of severe weather and long term exposure to UV light. MI-T-edg protective edge coating extends the life of the pad over that of non-treated pads. MI-T-edg is the strongest, most weather resistant edge coating available and is the only edge coating with patented algae resistance. view less
DropSTOP® Munters Corporation The Munters DropSTOP® is a highly efficient droplet separator that has been specially developed and optimized to remove droplet carry-over from cooling coils. DropSTOP characteristics are: extremely effective droplet separation, very low pressure drop, an...view more The Munters DropSTOP® is a highly efficient droplet separator that has been specially developed and optimized to remove droplet carry-over from cooling coils. DropSTOP characteristics are: extremely effective droplet separation, very low pressure drop, and small installation size. view less
Duct Board / SuperDuct® RC Johns Manville SuperDuct® RC Air Duct Board is made from strong, resilient glass fibers bonded with a thermosetting resin. Male/female joints are factory made on the transverse edges of each board. A tough FSK (foil-scrim-kraft) facing is laminated to the exterior surfa...view more SuperDuct® RC Air Duct Board is made from strong, resilient glass fibers bonded with a thermosetting resin. Male/female joints are factory made on the transverse edges of each board. A tough FSK (foil-scrim-kraft) facing is laminated to the exterior surface of the board. The air stream surface features Johns Manville’s exclusive Reinforced Coating system – a high-tensile glass mat that reinforces our proven Pemacote® acrylic polymer coating to provide a smooth surface with excellent durability and acoustical properties. view less
Duct Liner / Duct Liner PM Johns Manville Duct Liner PM is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream surface is protected using a durable glass mat facing which contains an EPA-registered antimicrobial agent. The flexible glas...view more Duct Liner PM is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream surface is protected using a durable glass mat facing which contains an EPA-registered antimicrobial agent. The flexible glass mat also provides a smooth airstream surface. view less
Duct Liner / Linacoustic RC™ Johns Manville Linacoustic RC is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream suface is protected with JM's exclusive Reinforced Coating System, which combines state-of-the-art Permacote® acrylic coatin...view more Linacoustic RC is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream suface is protected with JM's exclusive Reinforced Coating System, which combines state-of-the-art Permacote® acrylic coating with a flexible glass mat reinforcement. view less
Duct Liner / Permacote® Linacoustic® R-300 Rigid Plenum Board Johns Manville Permacote® Linacoustic® R-300 Rigid Fiber Glass Plenum Liner Board is a rigid fiber glass board that provides high acoustical and thermal insulation. The airstream surface is protected with JM's exclusive state-of-the-art Permacote® acrylic coating.
Duct Liner / Permacote® Linacoustic® RC-HP Johns Manville Permacote® Linacoustic® RC-HP is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream surface is protected with JM's exclusive Reinforced Coating System, which combines state-of-the-art Permacote...view more Permacote® Linacoustic® RC-HP is a flexible duct liner insulation made from strong, glass fibers bonded with a thermosetting resin. The airstream surface is protected with JM's exclusive Reinforced Coating System, which combines state-of-the-art Permacote® acrylic coating with a flexible glass mat reinforcement. Permacote Linacoustic RC-HP provides superior thermal and acoustical performance. view less
Duct Liner / Spiracoustic Plus™ Round Duct Liner System Johns Manville Spiracoustic Plus™ Round Duct Liner System is specifically engineered to provide very high acoustical and thermal insulation in round air ducts of virtually any size. The airstream surface is protected with JM's exclusive state-of-the-art Permacote® acryl...view more Spiracoustic Plus™ Round Duct Liner System is specifically engineered to provide very high acoustical and thermal insulation in round air ducts of virtually any size. The airstream surface is protected with JM's exclusive state-of-the-art Permacote® acrylic coating. view less
Duct Wrap / Microlite® EQ Formaldehyde-free™ Johns Manville Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforc...view more Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforced vapor barrier facing. It is designed for the external insulation of HVAC ducts, and is available in a variety of different thicknesses and densities in order to meet installed performance requirements. view less
Duct Wrap / Microlite® XG™Formaldehyde-Free Johns Manville Microlite duct wrap insulation is a light-weight, highly resilient, blanket-type thermal and acoustical insulation made of glass fibers, bonded with a white formaldehyde-free resin.
Duct Wrap LF R-5 Owens Corning Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for H...view more Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for HVAC systems used in hospitals view less
Earthwool Insulation Board Unfaced and Acoustical Board with ECOSE® Technology Knauf Insulation Thermal and acoustical rigid board insulation.
Earthwool™ 1000° Pipe Insulation with ECOSE Technology Knauf Insulation Knauf Insulation Earthwool™ 1000° Pipe Insulation is a molded, heavy-density, one-piece insulation made from inorganic glass mineral wool bonded with ECOSE® Technology. It is produced in 3’ lengths with or without a factory-applied jacket. ASJ+ is the new...view more Knauf Insulation Earthwool™ 1000° Pipe Insulation is a molded, heavy-density, one-piece insulation made from inorganic glass mineral wool bonded with ECOSE® Technology. It is produced in 3’ lengths with or without a factory-applied jacket. ASJ+ is the newest generation all-service jacket composed of aluminum foil, reinforced with a glass scrim bonded to a kraft paper interleaving with an outer film layer leaving no paper exposed. A matching ASJ+ butt strip is furnished in the carton for each section. The jacket is white, and the longitudinal lap of the jacket has a self-sealing adhesive - SSL+. view less
EcoFill Wx Blowing Insulation Knauf Insulation Loosefill blowing insulation designed for attic areas and retrofit wall, floor and ceiling applications.
EcoTouch® Insulation for Flexible Duct Owens Corning Owens Corning™ EcoTouch® Insulation for Flexible Duct is a lightweight, flexible, resilient thermal and acoustical insulation made of inorganic glass fibers bonded with a thermosetting resin. Key Features • Easy to handle. • Consistently meets UL-181 tes...view more Owens Corning™ EcoTouch® Insulation for Flexible Duct is a lightweight, flexible, resilient thermal and acoustical insulation made of inorganic glass fibers bonded with a thermosetting resin. Key Features • Easy to handle. • Consistently meets UL-181 test requirements. • Made in the U.S.A. • Formaldehyde-free*. • Excellent recovery provides outstanding thermal and acoustical performance. • High recycled content— minimum 57%. • EcoTouch® insulation is the only fiberglass insulation product listed in the USDA BioPreferredSM Catalog. *Applies to the insulation component only. view less
Elevated Temperature Products with ECOSE® Technology Knauf Insulation Thermal and acoustical glass mineral wool insulation designed to be used in high temperature applications such as boilers, ovens and furnaces up to 1000º F. Products are available in blanket, panel or board forms.
EverClean Thermaflex Division Anti-Microbial resist and inhibit the growth of mold and mildew and help improve IAQ. Energy Efficient OC insulation enhances air temperature and reduces noice, Accostically rated. All components are self-extinguishing and will not deteriorate in a fite u...view more Anti-Microbial resist and inhibit the growth of mold and mildew and help improve IAQ. Energy Efficient OC insulation enhances air temperature and reduces noice, Accostically rated. All components are self-extinguishing and will not deteriorate in a fite until the melting point of glass. Heavy woven and coated fiberglass cloth core will not puncture or tear, eliminating "blow out" and costly callback. LifeTime Warranty view less
Evolution Paper-Free ASJ Owens Corning Owens Corning Pipe Insulation with Evolution™ Paper-Free ASJ will not support mold growth and is impervious to moisture, thereby helping to improve indoor air quality. The facing is cleanable, accepts mastic, can be painted for color coding and has an app...view more Owens Corning Pipe Insulation with Evolution™ Paper-Free ASJ will not support mold growth and is impervious to moisture, thereby helping to improve indoor air quality. The facing is cleanable, accepts mastic, can be painted for color coding and has an appearance that is compatible with standard ASJ. It features the SSL II® Positive Closure System, which eliminates the need to staple or tape. Key Features • Evolution™ jacket is more than 3X tougher than standard ASJ. The paper free all service jacket does not support mold growth and is designed to have compatible finished job appearance with standard ASJ. • The double adhesive lap seal and two-part butt strip seal provide effective long term vapor sealing of the longitudinal and butt joints. • SSL II® Positive Closure is fast, neat and foolproof. There is no need for staples which promotes job site productivity. • Short pieces of insulation can be cut without jacket loss and the section will not come apart in handling. There are no “dogears” in or out of the carton. Dust and moisture cannot reach the lap seal. Butt strips come in sealed bags inside the carton so they can stay clean until the moment of use. • Fiberglas™ Pipe Insulation’s low thermal conductivity contributes to lower operating costs of heating and cooling equipment. • The flame spread rating of 25 or less and smoke developed rating of 50 or less usually means that Fiberglas™ Pipe Insulation will be granted immediate building code approval. view less
FDM Blanket Insulation with ECOSE® Technology Knauf Insulation Flexible blanket insulation designed to be used by Flexible Duct Manufacturers as insulation around inner core of flexible ducts.
FiberglasTM Pipe Insulation with ASJ Facing Owens Corning Owens Corning™ Fiberglas™ Pipe Insulations are molded of heavy density resin bonded inorganic glass fibers. The one-piece, 36"(914mm) long, hinged sections are opened, placed over the pipe, closed and secured by means specific to the type as described bel...view more Owens Corning™ Fiberglas™ Pipe Insulations are molded of heavy density resin bonded inorganic glass fibers. The one-piece, 36"(914mm) long, hinged sections are opened, placed over the pipe, closed and secured by means specific to the type as described below. Fiberglas™ SSL II® Pipe Insulation is jacketed with a smooth, reinforced, wrinkle resistant all-service vapor retarder jacket (ASJ). • The double adhesive lap seal and two-part butt strip seal provide effective long term vapor sealing of the longitudinal and butt joints. • SSL II® Positive Closure is fast, neat and foolproof. There is no need for staples which promotes job site productivity. • Fiberglas™ Pipe Insulation’s low thermal conductivity contributes to lower operating costs of heating and cooling equipment. • The flame spread rating of 25 or less and smoke developed rating of 50 or less usually means that Fiberglas™ Pipe Insulation will be granted immediate building code approval. • Certified by Scientific Certification Systems to contain a minimum of 57% recycled glass content view less
Flex-Aire Flexible Duct ATCO Rubber Products, Inc. Shown are our three most popular insulated flexible ducts. All are UL 181, Class 1 Air Ducts, constructed of a tough black inner core, and surrounded by a thick blanket of fiberglass insulation. Each has a unique outer vapor barrier allowing you to choose...view more Shown are our three most popular insulated flexible ducts. All are UL 181, Class 1 Air Ducts, constructed of a tough black inner core, and surrounded by a thick blanket of fiberglass insulation. Each has a unique outer vapor barrier allowing you to choose just the right product for your HVAC application. Insulation values available: R-4.2, R-6.0, and R-8.0 view less
Flexible Duct Core - CPE ATCO Rubber Products, Inc. Flexible Duct Core - CPE
Flexible Duct Core - Polyester ATCO Rubber Products, Inc. Flexible Duct Core
Flexible Duct Core - Polyester/Aluminum(ALT) ATCO Rubber Products, Inc. Flexible Duct Core
Flexible Duct Insulation / Flex-Glas® EQ Johns Manville Flex-Glas® EQ Formaldehyde-free™ Flexible Duct Insulation is a brown, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with a bio-based binder. Flex-Glas® EQ is designed for use in the manufacture of insulated...view more Flex-Glas® EQ Formaldehyde-free™ Flexible Duct Insulation is a brown, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with a bio-based binder. Flex-Glas® EQ is designed for use in the manufacture of insulated ducts for HVAC air handling systems and designed to meet the installed thermal requirements of local, state, and national energy codes for air duct systems. It reduces noise from air movement and mechanical equipment and is available in rolls slit to widths from 15” to 93” and thicknesses of 1-1/4” to 2-1/2”. view less
Flexible Duct Insulation / Flex-Glas® PC Johns Manville Flex-Glas® PC Flexible Duct Blanket is a white, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with an acrylic resin. Flex-Glas® PC is designed for use in the manufacture of insulated ducts for HVAC air hand...view more Flex-Glas® PC Flexible Duct Blanket is a white, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with an acrylic resin. Flex-Glas® PC is designed for use in the manufacture of insulated ducts for HVAC air handling systems and designed to meet the installed thermal requirements of local, state, and national energy codes for air duct systems. It reduces noise from air movement and mechanical equipment and is available in rolls slit to widths from 15” to 93” and thicknesses of 1-1/4” to 2-1/2”. view less
FlexTherm Nomaco Insulation FlexTherm flexible elastomeric tube insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm an efficient insulator and effective moisture vapor reta...view more FlexTherm flexible elastomeric tube insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm an efficient insulator and effective moisture vapor retarder. FlexTherm is available in wall thicknesses of 3/8" through 1-1/2". FlexTherm key physical properties are approved by Factory Mutual Corporation. FlexTherm is non-porous, non-fibrous and resists mold growth. view less
FlexTherm Self Seal Nomaco Insulation FlexTherm Self Seal flexible elastomeric tube insulation is pre-slit with a factory applied pressure sensitive adhesive. It is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell struc...view more FlexTherm Self Seal flexible elastomeric tube insulation is pre-slit with a factory applied pressure sensitive adhesive. It is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Self Seal an efficient insulator and effective moisture vapor retarder. FlexTherm Self Seal tube is available in wall thicknesses of 1/2" and 1". FlexTherm Self Seal key physical properties are approved by Factory Mutual Corporation. FlexTherm Self Seal is non-porous, non-fibrous and resists mold growth. view less
FlexTherm Sheet Nomaco Insulation FlexTherm Sheet flexible elastomeric insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Sheet an efficient insulator and effective moisture vap...view more FlexTherm Sheet flexible elastomeric insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Sheet an efficient insulator and effective moisture vapor retarder. FlexTherm Sheet is available in wall thicknesses of 1/2" through 2". It is supplied as flat sheets or rolls. FlexTherm Sheet key physical properties are approved by Factory Mutual Corporation. FlexTherm Sheet is non-porous, non-fibrous and resists mold growth. view less
GEM™ Insulation Fiber Glass Insulation for Industrial Applications Owens Corning Owens Corning GEM insulation is designed for high temperature commercial and industrial applications. The product is an excellent choice for applications where a high density blanket with excellent flexibility and dimensional stability is required. The pr...view more Owens Corning GEM insulation is designed for high temperature commercial and industrial applications. The product is an excellent choice for applications where a high density blanket with excellent flexibility and dimensional stability is required. The product is thin, has outstanding dimensional stability, excellent thermal performance, low smoke and odor, and is easy to handle and install. The flexible, white, mechanically entangled fiber glass blankets are bonded with a proprietary thermoset binder. • GEM insulation’s tensile strength and thickness allow for design flexibility and ease of handling and installation • Helps absorb equipment noise, providing acoustical benefits • Helps provide optimal thermal performance when compared to competitive materials. • Operates in environments from subzero to 1000ºF. view less
GLASdek® Munters Corporation Munters GLASdek evaporative media is made from a flame retardant material fortified with special rigidifying agents. The cross fluted, unequal angle pad design induces highly turbulent mixing of air and water for optimum heat and moisture transfer. This u...view more Munters GLASdek evaporative media is made from a flame retardant material fortified with special rigidifying agents. The cross fluted, unequal angle pad design induces highly turbulent mixing of air and water for optimum heat and moisture transfer. This unique design also functions to continually direct more water to the air entering face of the pad, where the most intense evaporation occurs, further enhancing the operating efficiency of the pad. GLASdek achieves high evaporative efficiency with exceptional cooling and humidification rates due to its design, manufacturing and materials. GLASdek is the only media choice where strict adherence to fire codes is required. Fire Rated UL®900, it is manufactured from specifically engineered, flame retardant materials.In most cases, routine maintenance can be performed while systems are still operating. When properly maintained, Munters GLASdek pads will provide many years of highly efficient cooling and humidification. With the media also being GREENGUARD certified under UL’s certification program, this guarantees GLASdek® IV as having low chemical emissions, further improving the air in which the media is used. view less
GLASdek® IV Munters Corporation Munters GLASdek evaporative media is made from a flame retardant material fortified with special rigidifying agents. The cross fluted, unequal angle pad design induces highly turbulent mixing of air and water for optimum heat and moisture transfer. This u...view more Munters GLASdek evaporative media is made from a flame retardant material fortified with special rigidifying agents. The cross fluted, unequal angle pad design induces highly turbulent mixing of air and water for optimum heat and moisture transfer. This unique design also functions to continually direct more water to the air entering face of the pad, where the most intense evaporation occurs, further enhancing the operating efficiency of the pad. view less
GLASdek® w/TUFedg Munters Corporation Munters TUFedg is a tough and resilient edge treatment applied to the air entering face of a GLASdek pad. It has been formulated to withstand repeated cleaning without damaging the pad.Munters TUFedg is non-porous and quick drying. It prevents algae and m...view more Munters TUFedg is a tough and resilient edge treatment applied to the air entering face of a GLASdek pad. It has been formulated to withstand repeated cleaning without damaging the pad.Munters TUFedg is non-porous and quick drying. It prevents algae and minerals from anchoring themselves into the substrate of the pad, so they slough off when dried. TUFedg also protects GLASdek pads from damaging effects of severe weather and long term exposure to UV light. This protective edge coating extends the life of the pad over that of non-treated pads. view less
Gray Polyester Duct Gray Flex Systems, Inc. Gray Flex’s flexible ducts are tested in accordance with U.L. 181 and approved for use as a Class 1 air duct material. Jacketing is printed with certification label, size and performance data every 24”. Foot markers are provided every 12”. Gray flexible d...view more Gray Flex’s flexible ducts are tested in accordance with U.L. 181 and approved for use as a Class 1 air duct material. Jacketing is printed with certification label, size and performance data every 24”. Foot markers are provided every 12”. Gray flexible duct is manufactured from scrim reinforced gray polyester and comes in three R-Values; R-4.2 (6GF), R-6.0 (6GF-6), and R-8.0 (6GF-8). Gray flexible duct comes with our exclusive patented air tight, reinforced inner liner core. Gray flexible duct is available in standard sizes from 4” to 20”, in lengths of 25’ or 50’. Gray flexible duct is designed for indoor use only. Visit our web site or contact us for Specification Sheets. view less
GTR Media Munters Corporation Munters proprietary GTR wheel is an adsorbent that outperforms standard desiccants by as much as 60%. The GTR is especially effective in applications that utilize 100% outside air.
GX40® Munters Corporation Munters GLASdek® is a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service. The media is made from inorganic, non-combustible material.
Hart & Cooley and AMERIFLEX Commercial Series Flexible Air Duct Hart & Cooley, Inc. Hart & Cooley and AMERIFLEX offer a comprehensive line of top quality flexible duct products, that are tested to rigorous UL 181 standards, and are UL listed. Commercial Series flexible duct is based on a tough metalized polyester and encapsulated wire he...view more Hart & Cooley and AMERIFLEX offer a comprehensive line of top quality flexible duct products, that are tested to rigorous UL 181 standards, and are UL listed. Commercial Series flexible duct is based on a tough metalized polyester and encapsulated wire helix core that is UL pressure tested to +16" W.C. and -1" W.C. (Up to 14" diameter. 16" diameter and above: +16" W.C. and -1/2" W.C.) Insulation is formaldehyde free with ADC certified R values of R4.2, 6.0, 8.0. Available with metalized jacket , featuring embedded scrim for top strength and tear resistance, boxed or bagged, and diameters 3" through 20". All carry a full 10 year warranty so you can install them with confidence. view less
Hart & Cooley and AMERIFLEX Standard Flexible Air Duct Hart & Cooley, Inc. Hart & Cooley and AMERIFLEX offer a comprehensive line of top quality flexible duct products that are tested to rigorous UL181 standards, and are UL listed. Standard flexible duct is based on a class-leading black polyester and encapsulated steel wire hel...view more Hart & Cooley and AMERIFLEX offer a comprehensive line of top quality flexible duct products that are tested to rigorous UL181 standards, and are UL listed. Standard flexible duct is based on a class-leading black polyester and encapsulated steel wire helix core, that is UL pressure tested to +12" W.C. and -3/4" W.C. (Up to 14" diameter. 16" diameter and above: +12 W.C. & -1/2" W.C.) Insulation is formaldehyde-free with ADC certified R values of R4.2, 6.0, 8.0. Available with black or metalized jacket, boxed or bagged, & diameters of 3" through 20". All carry a full 10 year warranty, so you can install them with confidence. view less
HCR Media Munters Corporation Munters proprietary HCR wheel is an adsorbent wheel that is designed to use low temperature air for reactivation. The wheel is standard in Munters HCU dehumidifiers. HCU dehumidifiers use refrigeration waste heat for desiccant reactivation.
HPX Media Munters Corporation Munters unique HPX wheel is an adsorbent that provides very low dew points (-70°F and lower). This desiccant is used under the advice of a Munters engineer for specialty applications.
Imcolock Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems. Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. ...view more Flexible, closed cell polyolefin insulation for piping systems. Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products It is black in color and available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of 3/8", 1/2", 3/4" and 1" IMCOLOCK is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B.0B. view less
Imcosheet Nomaco Insulation IMCOA® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8 thru 2-1/2". Standard roll width is 48" available in the same thickn...view more IMCOA® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8 thru 2-1/2". Standard roll width is 48" available in the same thickness. view less
Insul-Lock® Seam-Seal Pipe K-Flex USA, LLC Insul-Lock® insulation products and accessories are widely recognized by the HVACR and Plumbing wholesale trade. They offer superior product characteristics such as cold weather flexibility, durable skin surface and exacting manufacturing tolerances. Fea...view more Insul-Lock® insulation products and accessories are widely recognized by the HVACR and Plumbing wholesale trade. They offer superior product characteristics such as cold weather flexibility, durable skin surface and exacting manufacturing tolerances. Features and Benefits include: Moisture Vapor Resistance, 3 Ft and 6 Ft sizes arevavailable for different application installations, white color available for interior systems, Seam Seal Pressure Sensitive Adhesive (PSA) for quick and easy installation with no mess, and ability to withstand temperature ranges of -70°F to 200°F (-57°C to 93°C) and Mold and mildew resistant. Insul-Lock® key physical properties are approved through supervision by Factory Mutual Research Corporation. Insul-Lock® is non-porous, non-fibrous and resists mold growth. view less
Insul-Sheet® S2S K-Flex USA, LLC Insul-Sheet® S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell struct...view more Insul-Sheet® S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. Insul-Sheet® S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. view less
Insul-Tube® 6-foot (unslit) K-Flex Malaysia Sdn Bhd. Insul-Tube® 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of Insul-Tube® 6-foot (unslit) create an exceptional insulation, protect against mo...view more Insul-Tube® 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of Insul-Tube® 6-foot (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. Insul-Tube® 6-foot (unslit) is primarily used in the HVAC/R market and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” inside diameter in 3/8” to 1-1/2” wall thicknesses. Insul-Tube® products are non-porous and non-fibrous and resist mold, fungal and bacterial growth. For added protection, all Insul-Tube® products are protected with an antimicrobial agent. view less
Insul-Tube® White 6-foot K-Flex USA, LLC Insul-Tube® White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of Insul-Tube® White 6-foot prevent frost formation on cold lines and heat loss on hot wat...view more Insul-Tube® White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of Insul-Tube® White 6-foot prevent frost formation on cold lines and heat loss on hot water plumbing and solar application. This product provides superior performance in the -297°F to 220°F temperature range. Insul-Tube® White 6-foot is primarily used in the HVAC/R market and in areas where a more hygienic appearance is required. It comes in 6’ lengths in a variety of sizes from 3/8” to 4-1/8” inside diameter in specific wall thicknesses. view less
Insulated Sleeve Quietflex Manufacturing Company Insulated Sleeve is ideal for use in insulating new or existing hard pipe. It increases the efficientcy of warm or cool air traveling through the duct and reduces condensation build-up. • Available in R-4.2, R-6.0 and R-8.0 • Johns Manville Formaldehyde...view more Insulated Sleeve is ideal for use in insulating new or existing hard pipe. It increases the efficientcy of warm or cool air traveling through the duct and reduces condensation build-up. • Available in R-4.2, R-6.0 and R-8.0 • Johns Manville Formaldehyde-Free Insulation • Reinforced metallic polyester-vapor barrier or in polyethylene vapor barrier • Standard length of 5 feet • One starter cap included in each box view less
Insulated Sleeves Gray Flex Systems, Inc. Gray Flex’s insulated sleeves are tested in accordance with U.L. 181 and are appropriate for use as metal duct pipe insulators. Gray Flex’s insulated sleeves are lightweight and flexible providing for quick and easy install. It also helps prevent condensa...view more Gray Flex’s insulated sleeves are tested in accordance with U.L. 181 and are appropriate for use as metal duct pipe insulators. Gray Flex’s insulated sleeves are lightweight and flexible providing for quick and easy install. It also helps prevent condensation, improves the thermal efficiency and acoustical performance of rigid pipe. Three different models and R-Values provide you a choice of scrim reinforced metalized polyester (R-4.2 (SS), R-6.0 (SS-6), and R-8.0 (SS-8)), scrim reinforced gray polyester (R-4.2 (GS), R-6.0 (GS-6), and R-8.0 (GS-8)), or black polyethylene (R-4.2 (BS), R-6.0 (BS-6), and R-8.0 (BS-8)). All models are available in standard sizes from 4” to 20”, in lengths of 5’. Each box contains one starter cap. Gray Flex’s insulated sleeves are designed for indoor use only. Visit our web site or contact us for Specification Sheets. view less
ISOAFS-ALU HYGIENE GREEN AFS BORU SANAYI A.S. The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoo...view more The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoor air can lead to respiratory problems, infectious diseases or other allergic reactions and other various human health effects. AFS has come up with a new hygienic solution, developed with state of the art technology. It will be the major component of safe ventilation systems that protects your indoor air quality. view less
ISOAFS-ALU SHINE ECOSOFT AFS BORU SANAYI A.S. ISOAFS-ALU SHINE ECOSOFT thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU SHINE ECOSOFT is produced from mult...view more ISOAFS-ALU SHINE ECOSOFT thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU SHINE ECOSOFT is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU SHINE ECOSOFT has high elasticity and flexibility. It can be easily fitted to circular or oval connectors. TECHNICAL PROPERTIES Inner Duct Construction: 2 ply polyester + 1 ply aluminium Jacket Construction: 1 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C Insulation: Glass Wool view less
ISOAFS-ALU.70 GREEN AFS BORU SANAYI A.S. ISOAFS-ALU.70 GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.70 GREEN is produced from multi-layer al...view more ISOAFS-ALU.70 GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.70 GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 2 ply polyester Jacket Construction: 1 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C Insulation: Glass Wool view less
ISOAFS-ALU.F FORTE GREEN AFS BORU SANAYI A.S. ISOAFS-ALU.F FORTE GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F FORTE GREEN is produced from mult...view more ISOAFS-ALU.F FORTE GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F FORTE GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU.F FORTE GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 1 ply polyester Jacket Construction: 1 ply aluminium + 2 ply polyester Available Diameters: 82 mm - 800 mm Wire Pitch: 18 mm (if Ø is greater than or equal to 102 mm) Temperature Range: -30 °C / +250 °C Insulation: Glass Wool view less
ISOAFS-ALU.F GREEN AFS BORU SANAYI A.S. ISOAFS-ALU.F GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F GREEN is produced from multi-layer alum...view more ISOAFS-ALU.F GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU.F GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 1 ply polyester Jacket Construction: 1 ply aluminium + 2 ply polyester Available Diameters: 82 mm - 800 mm Temperature Range: -30 °C / +250 °C Insulation: Glass Wool view less
ISOAFS-ALU.F HYGIENE GREEN AFS BORU SANAYI A.S. The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoo...view more The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoor air can lead to respiratory problems, infectious diseases or other allergic reactions and other various human health effects. AFS has come up with a new hygienic solution, developed with state of the art technology. It will be the major component of safe ventilation systems that protects your indoor air quality. view less
ISOAFS-ALU.F PLUS GREEN AFS BORU SANAYI A.S. ISOAFS-ALU.F PLUS GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F PLUS GREEN is produced from multi-...view more ISOAFS-ALU.F PLUS GREEN thermally insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust, and air conditioning systems. Airtight ISOAFS-ALU.F PLUS GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU.F PLUS GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. view less
ISOAFS-ALU.F RECTANGULAR GREEN AFS BORU SANAYI A.S. ISOAFS-ALU.F RECTANGULAR GREEN thermally insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional ar...view more ISOAFS-ALU.F RECTANGULAR GREEN thermally insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional area at the minimum installation space. Airtight ISOAFS-ALU.70 RECTANGULAR GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire, surrounded with glass wool insulation and an aluminium vapour barrier. ISOAFS-ALU has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 1 ply polyester Jacket Construction: 1 ply aluminium + 2 ply polyester Temperature Range: -30 °C / +250 °C Insulation: Glass Wool view less
Jet Stream Ultra Blowing Wool Insulation Knauf Insulation Designed for use in both open attics and closed cavity BIBS system applications. Offers superior coverage and fire resistance for the life of the home.