UL Prospector

Success!

Successfully saved your search
Acousti-Mat 3 Maxxon Corporation Acousti-Mat 3 is the superior sound control system for floor systems that have been impossible to control, such as open beam, concrete slab and conventional wood frame construction. Acousti-Mat 3 increases IIC levels up to 17 points over wood frame, and u...view more Acousti-Mat 3 is the superior sound control system for floor systems that have been impossible to control, such as open beam, concrete slab and conventional wood frame construction. Acousti-Mat 3 increases IIC levels up to 17 points over wood frame, and up to 25 rating points (or more) over concrete. It also increases the STC rating 6-15 points over a bare wood frame system. Acousti-Mat 3 is now "Eco-Friendly" with 40% pre-consumer recycled content. It is also available with water resistant fabric. Manufacturer Keywords: Maxxon Acousti-Mat sound control sound control mat Acousti-Mat 3 view less
Acousti-Mat 3 HP Maxxon Corporation For challenging floors, like those found in warehouse-to-multifamily conversion projects, only the best will do. Acousti-Mat® 3 HP delivers top quality noise reduction by combining the proven sound reduction of Acousti-Mat’s floating floor technology with...view more For challenging floors, like those found in warehouse-to-multifamily conversion projects, only the best will do. Acousti-Mat® 3 HP delivers top quality noise reduction by combining the proven sound reduction of Acousti-Mat’s floating floor technology with an added layer of isolation. The HP layer of acoustical fabric is laminated to the bottom of a core of fused entangled filaments, which is attached to a non-woven, water-resistant fabric. Acousti-Mat 3 HP is then topped with a high-strength Maxxon Underlayment. At a height of 0.85" and requiring only a 11⁄2" reinforced topping, Acousti-Mat 3 HP provides ultimate sound control without significantly increasing the overall floor height. It is considered an “Eco-Friendly” building material, containing 40% recycled content. The entire system is covered by one warranty and is also GREENGUARD Gold Certified. Manufacturer Keywords: sound control, isolation, noise, acoustical, acoustical mat, acoustics, sound mat, mat, Acousti-Mat view less
Acousti-Mat I Maxxon Corporation Acousti-Mat I is the newest option in sound control where floor height is a concern. Its low 3/16” (5 mm) profile allows a thinner floating floor composite. Acousti-Mat I meets over 100 UL fire designs, while also increasing IIC levels by up to 10 points ...view more Acousti-Mat I is the newest option in sound control where floor height is a concern. Its low 3/16” (5 mm) profile allows a thinner floating floor composite. Acousti-Mat I meets over 100 UL fire designs, while also increasing IIC levels by up to 10 points over wood frame and 20 points over concrete. Acousti-Mat I is GREENGUARD Certified and is always manufactured with 40% pre-consumer recycled content. Manufacturer Keywords: Acousti-Mat I Acousti-Mat low profile Maxxon view less
Acousti-Mat II Maxxon Corporation The industry standard and cost-effective choice when floor height is a concern. It increases IIC levels up to 10 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system. Acou...view more The industry standard and cost-effective choice when floor height is a concern. It increases IIC levels up to 10 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system. Acousti-Mat II is "Eco-Friendly" with 40% pre-consumer recycled content. It is also available with water resistant fabric. Manufacturer Keywords: Maxxon Acousti-Mat sound control sound control mat Acousti-Mat II view less
Acousti-Mat II HP Maxxon Corporation A breakthrough in sound control, Acousti-Mat® II HP takes the proven sound control of Acousti-Mat's floating floor technology and adds an additional layer of isolation. An acoustical fabric is laminated to a core of fused entangled polymeric filaments, at...view more A breakthrough in sound control, Acousti-Mat® II HP takes the proven sound control of Acousti-Mat's floating floor technology and adds an additional layer of isolation. An acoustical fabric is laminated to a core of fused entangled polymeric filaments, attached to a non-woven, water-resistant fabric, and then topped with a high-strength Maxxon Underlayment. Manufacturer Keywords: sound control, isolation, noise, acoustical, acoustical mat, acoustics, sound mat, mat, Acousti-Mat  view less
Acousti-Mat LP Maxxon Corporation At less than 1/16", Acousti-Mat® LP is a unique blend of polymeric fibers of various shapes and sizes. The blend of these fibers is a proprietary mix designed to provide excellent reductions in sound transmission and sound reflection. The mat is bound tog...view more At less than 1/16", Acousti-Mat® LP is a unique blend of polymeric fibers of various shapes and sizes. The blend of these fibers is a proprietary mix designed to provide excellent reductions in sound transmission and sound reflection. The mat is bound together through a blend of polymer adhesives, which provide a tough durable mat with water repellant features. Acousti‑Mat LP can be attached to a concrete subfloor, then topped with a Maxxon Underlayment. The Acousti‑Mat LP is permanently encased in the underlayment, so when the floor goods are changed, the sound control system remains intact. With this application, the Acousti-Mat LP system can meet the 50 IIC sound control rating required by the International Building Code, before any floor goods are installed. Acousti-Mat LP achieves a Delta IIC of 19, that's approximately a 75% reduction in impact noise on concrete floor systems. Manufacturer Keywords: sound, sound control, thin, low profile, sound mat, mat, sound control mat, noise deadening, acoustical mat, acoustical treatment  view less
Acousti-Mat LPR Maxxon Corporation Acousti‑Mat LPR is an entangled mesh attached to a unique blend of polymeric fibers of various shapes and sizes. Requiring only a 3/4" gypsum underlayment topping, Acousti-Mat LPR is loose-laid over a wood subfloor, then topped with the underlayment for a...view more Acousti‑Mat LPR is an entangled mesh attached to a unique blend of polymeric fibers of various shapes and sizes. Requiring only a 3/4" gypsum underlayment topping, Acousti-Mat LPR is loose-laid over a wood subfloor, then topped with the underlayment for a low-profile sound control option. Acousti-Mat LPR is always an "Eco-Friendly" building material with 40% pre-consumer recycled content. Manufacturer Keywords: reinforced, reinforcement, sound, sound control, thin, low profile, sound mat, mat, sound control mat, noise deadening, acoustical mat, acoustical treatment view less
Acousti-Mat SD Maxxon Corporation For proven, superior sound control in steel frame construction, Acousti-Mat SD delivers the patented technology that meets the challenge. Designed to fit the flutes of 9/16" to 2-1/2" o.c. 22 gauge corrugated steel decking, the Acousti-Mat SD System isola...view more For proven, superior sound control in steel frame construction, Acousti-Mat SD delivers the patented technology that meets the challenge. Designed to fit the flutes of 9/16" to 2-1/2" o.c. 22 gauge corrugated steel decking, the Acousti-Mat SD System isolates sound waves that historically have been difficult to control. Fast, easy installation of Acousti-Mat SD is completed with the topping of a high-strength Maxxon® Underlayment. No longer limited to "quiet" carpet and pad alone, Acousti-Mat SD opens projects to any floor good option, from wood to stone to ceramic tile, without the associated sound transmission concerns. Manufacturer Keywords: Acousti-Mat SD Corrugated Steel Deck Steel Decking Steel Joist Steel Corrugated Steel Deck Steel Frame Acousti-Mat Maxxon sound control sound control mat view less
Commercial Topping Maxxon Corporation Commercial Topping, now always a "green" building material, is poured from a featheredge to 3", in new construction or renovation projects. With compressive strengths of 4000 psi (27.4 MPa) to 4500 psi (31 MPa), it's the ideal underlayment to meet ASTM F7...view more Commercial Topping, now always a "green" building material, is poured from a featheredge to 3", in new construction or renovation projects. With compressive strengths of 4000 psi (27.4 MPa) to 4500 psi (31 MPa), it's the ideal underlayment to meet ASTM F710, "Preparing Concrete to Receive Resilient Flooring". Plus, it pours over VAT, VCT, terrazzo or ceramic, with no shotblasting required. For the ultimate strong, smooth finish over concrete, precast, wood frame, and old, cracked lightweight, specify Commercial Topping. Manufacturer Keywords: underlayment, Maxxon, renovation, Commercial Topping view less
Dek C-Ment Maxxon Corporation Dek C-Ment is a special blend of cements with compressive strengths up to 4000 psi. Dek C-Ment provides a thinner solution for topping corrugated steel decking than traditional concrete. By requiring only a single pour for both interior and limited exteri...view more Dek C-Ment is a special blend of cements with compressive strengths up to 4000 psi. Dek C-Ment provides a thinner solution for topping corrugated steel decking than traditional concrete. By requiring only a single pour for both interior and limited exterior locations including decks, corridors, and balconies with Plidek. Dek C-Ment can be poured over all Maxxon Sound Mats and over radiant heat systems. Dek C-Ment takes foot traffic in little as 90 minutes, allowing light trade work to resume and moving your project towards completion more quickly. Manufacturer Keywords: Underlayment, Maxxon, steel decking, Dek C-Ment, corridors, decks, balconies, Plidek  view less
Dura-Cap Maxxon Corporation Dura-Cap, now an "Eco-Friendly" building material, is ideal for smoothing concrete slabs or precast planks in new or renovation projects. It's formulated to cap rough, pitted, cracked and out-of-level concrete. In renovation projects, it can be poured dir...view more Dura-Cap, now an "Eco-Friendly" building material, is ideal for smoothing concrete slabs or precast planks in new or renovation projects. It's formulated to cap rough, pitted, cracked and out-of-level concrete. In renovation projects, it can be poured directly over old tile and adhesive residue. Gyp-Crete 2000/3.2K and Dura-Cap can also be used over a special encapsulant to abate vinyl asbestos tile. It can be poured from 3 inches deep to a featheredge. Compressive strengths up to 3,800 psi (26.2 MPa). Manufacturer Keywords: underlayment, Dura-Cap, Maxxon, renovation, steel decking view less
Enkasonic Maxxon Corporation Enkasonic is the original sound control mat — the only mat tested after 10 years of use. It increases IIC levels up to 12 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system...view more Enkasonic is the original sound control mat — the only mat tested after 10 years of use. It increases IIC levels up to 12 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system. Enkasonic is "Eco-Friendly" with 40% pre-consumer recycled content. It is also offered with optional water resistant fabric. Manufacturer Keywords: Maxxon Acousti-Mat sound contorl sound control mat Enkasonic view less
Enkasonic HP Maxxon Corporation The original sound control mat just got better. Enkasonic® HP provides added impact noise control with an added layer of high performance acoustical fabric. The HP layer is laminated to the bottom of a core of fused entangled polymeric filaments, which is...view more The original sound control mat just got better. Enkasonic® HP provides added impact noise control with an added layer of high performance acoustical fabric. The HP layer is laminated to the bottom of a core of fused entangled polymeric filaments, which is attached to a non-woven, water resistant fabric. To complete the Maxxon engineered sound control system, Enkasonic HP is topped with a high-strength Maxxon Underlayment. Enkasonic HP increases the IIC levels of the floor/ceiling assembly by up to 19 points over wood frame construction and up to 25 points over concrete construction. Enkasonic HP is an approximate 3/8" thick mat and requires only a 1-1/2" topping. Considered an "Eco-Friendly" building material, Enkasonic HP is composed of 40% pre-consumer recycled content. For thinner pours, an approved reinforcement may be used to reduce the underlayment depth to 1" minimum. Manufacturer Keywords: sound control, isolation, noise, acoustical, acoustical mat, acoustics, sound mat, mat, Acousti-Mat, Enkasonic view less
Gyp-Crete Maxxon Corporation The industry standard for use over wood subfloors in multifamily construction. Provides sound and fire control. Its smooth surface is ideal for finished floor goods. Gyp-Crete is always an "Eco-Friendly" building material and is GREENGUARD and GREENGUARD ...view more The industry standard for use over wood subfloors in multifamily construction. Provides sound and fire control. Its smooth surface is ideal for finished floor goods. Gyp-Crete is always an "Eco-Friendly" building material and is GREENGUARD and GREENGUARD Gold Certified. Manufacturer Keywords: gyp-crete, underlayment, green, gypsum concrete, multifamily, gypsum view less
Gyp-Crete 2000/3.2K Maxxon Corporation Gyp-Crete 2000/3.2K, now "Eco-Friendly" building material, is engineered to deliver compressive strengths up to 3200 psi (22.1 MPa). It's ideal for use over wood or concrete subfloors in single-family, light commercial and multifamily construction, as wel...view more Gyp-Crete 2000/3.2K, now "Eco-Friendly" building material, is engineered to deliver compressive strengths up to 3200 psi (22.1 MPa). It's ideal for use over wood or concrete subfloors in single-family, light commercial and multifamily construction, as well as renovation projects. (And it's crack-resistant surface provides a perfect base for practically any floor covering.) Manufacturer Keywords: underlayment, gypcrete, gyp-crete, Maxxon view less
KXA 08504-B Bolt-on Busbar EAE E-Line KX Series Compact Busbar Systems are used for vertical and horizontal distribution and transmission of power in facilities for high power applications Manufacturer Keywords: Aluminum Busbar
KXC 10504-B Bolt-on Busbar EAE E-Line KX Series Compact Busbar Systems are used for vertical and horizontal distribution and transmission of power in facilities for high power applications (plug-in or bolt-on type) Manufacturer Keywords: Copper Busbar
Level-Right Maxxon Corporation A specially formulated, high-strength, cementitious underlayment that can handle any floor leveling challenge - without shotblasting or scarifying. With compressive strengths up to 5,500 psi (38 MPa), it is the perfect solution for problem floors in large...view more A specially formulated, high-strength, cementitious underlayment that can handle any floor leveling challenge - without shotblasting or scarifying. With compressive strengths up to 5,500 psi (38 MPa), it is the perfect solution for problem floors in large projects or for small repair jobs. Manufacturer Keywords: floor leveling, underlayment, flooring, renovation, Maxxon view less
Ortecrete Maxxon Corporation Ortecrete floor underlayment, now "Eco-Friendly" building material, offers solutions for practically any flooring challenge — from new construction to renovation, commercial to single family applications. But the benefits don't stop there. In addition to ...view more Ortecrete floor underlayment, now "Eco-Friendly" building material, offers solutions for practically any flooring challenge — from new construction to renovation, commercial to single family applications. But the benefits don't stop there. In addition to fast installation and a new, smooth surface, it also brings significant sound control and fire resistance properties to every project. Manufacturer Keywords: Maxxon, Ortecrete view less
Rapid Floor Maxxon Corporation Rapid Floor offers the advantage of a smooth, joint-free surface and is an excellent alternative to double wood floor construction in new, multifamily residential projects. Manufacturer Keywords: gyp-crete, underlayment, green, gypsum concrete, multi...view more Rapid Floor offers the advantage of a smooth, joint-free surface and is an excellent alternative to double wood floor construction in new, multifamily residential projects. Manufacturer Keywords: gyp-crete, underlayment, green, gypsum concrete, multifamily, gypsum  view less
Rapid Floor Plus Maxxon Corporation Rapid Floor® Plus, now always an "Eco-Friendly" building material, provides the extra muscle required when the job calls for a tougher, more durable surface. Its flexible compressive strength can be formulated to range from 2000 to 3200 psi (14 to 22 MPa)...view more Rapid Floor® Plus, now always an "Eco-Friendly" building material, provides the extra muscle required when the job calls for a tougher, more durable surface. Its flexible compressive strength can be formulated to range from 2000 to 3200 psi (14 to 22 MPa), for the increased surface hardness that's critical in renovation, single family and commercial projects. Manufacturer Keywords: floors, flooring, Maxxon, Rapid Floor, underlayment view less
Rapid Floor Ultra Maxxon Corporation Rapid Floor® Ultra, now an "Eco-Friendly" building material, is formulated to provide compressive strengths ranging from 2500 to 4000 psi (17.2 to 27.4 MPa), and offers an economical alternative to many concrete floor underlayment applications in commerci...view more Rapid Floor® Ultra, now an "Eco-Friendly" building material, is formulated to provide compressive strengths ranging from 2500 to 4000 psi (17.2 to 27.4 MPa), and offers an economical alternative to many concrete floor underlayment applications in commercial and renovation projects. Manufacturer Keywords: underlayment, floors, flooring, Maxxon, Rapid Floor view less
Rapid Radiant Maxxon Corporation Rapid Radiant®, now always a "green" building material, is the ultimate underlayment for radiant heat applications. Poured over hot water tubes or electric heating cables, it maximizes radiant heat performance while withstanding temperature fluctuations. ...view more Rapid Radiant®, now always a "green" building material, is the ultimate underlayment for radiant heat applications. Poured over hot water tubes or electric heating cables, it maximizes radiant heat performance while withstanding temperature fluctuations. Manufacturer Keywords: Rapid Floor, floors, flooring, Maxxon, underlayment view less
Therma-Floor Maxxon Corporation Specially formulated for radiant floor heating systems and now always an "Eco-Friendly" building material, Therma-Floor®, encases hydronic tubes or electric cables in crack-resistant, noncombustible gypsum. Therma-Floor turns the entire floor into a smoot...view more Specially formulated for radiant floor heating systems and now always an "Eco-Friendly" building material, Therma-Floor®, encases hydronic tubes or electric cables in crack-resistant, noncombustible gypsum. Therma-Floor turns the entire floor into a smooth, even-heating radiator — making the heating system more responsive. Provides the ideal thermal mass, plus fire and sound control. Manufacturer Keywords: Therma-Floor, Maxxon, underlayment, thermal mass, radiant heat, flooring view less