UL Prospector

Success!

Successfully saved your search
All-Welded Steel Locker Penco Products, Inc Penco’s All-Welded lockers offer superior resistance to hard use and abuse. All body parts are welded into a single rigid unit to resist damage for the life of the product. The door frame and locker side are 16 gauge. The backs, tops and bottoms of each g...view more Penco’s All-Welded lockers offer superior resistance to hard use and abuse. All body parts are welded into a single rigid unit to resist damage for the life of the product. The door frame and locker side are 16 gauge. The backs, tops and bottoms of each group of lockers are made from single pieces of steel that span multiple lockers. The doors are made from 14 gauge steel and include a continuous hinge. Sides, tops, bottoms and shelves are 16 gauge steel. Backs are 18 gauge. Since All-Welded lockers are shipped pre-assembled, the time and expense of on-site installation is greatly reduced. This is a great help where labor is either extremely expensive, or hard to find. Groupings will be determined by Penco based upon the floor plan layout drawings submitted with the order (not to exceed 54”). All-Welded lockers are available as standard in ventilated models with diamond-shaped perforations in the doors and sides for maximum visibility and ventilation, or with solid door and side construction, with or without door louvers. The perforated models are ideal for heavy duty athletic use, where ventilation is important to aid the drying of athletic gear. Standard construction is flat top without legs. Lockers can be ordered with 4” high legs or 4” high 16 gauge integral Channel Bases, as options. • 16 ga. body & 18 ga. back for durability • 14 ga. door and Classic III handle standard • Optional Defiant II single point latching • Ships fully assembled Manufacturer view less
Clipper Industrial Shelving Penco Products, Inc At the heart of the Clipper Shelving System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time, and actually helps make the shelving more rigid. Clipper® Shelving features Hi-Pe...view more At the heart of the Clipper Shelving System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time, and actually helps make the shelving more rigid. Clipper® Shelving features Hi-Performance® Box Beam shelves, which offer an exceptional strength to weight ratio. Clipper Shelving offers a wide variety of sizes and capacities too. This gives you the flexibility to provide top quality storage for a simple back room area up to a sophisticated multi-level or high-rise application. Manufacturer Keywords: industrial shelving, multi-tier shelving, steel shelving, warehouse shelving, inventory shelving view less
Erectomatic Industrial Shelving Penco Products, Inc The Erectomatic Hi-Performance Shelving System is designed for greater strength, durability and versatility. Start with a single-tiered system today and expand into high density, multi-level or high rise systems tomorrow. At the heart of the system is the...view more The Erectomatic Hi-Performance Shelving System is designed for greater strength, durability and versatility. Start with a single-tiered system today and expand into high density, multi-level or high rise systems tomorrow. At the heart of the system is the hi-performance welded box-beam flange shelf designed to be: • Stronger - capacities from 400 lbs to 2,000 lbs • Simpler - no need for shelf reinforcing channels, even for extra heavy duty capacity shelving which means fewer parts, less expense. • Versatile - can be used with your choice of four posts types. Along with the box-beam shelf, the Erectomatic Hi-Performance Shelving System features Beaded Posts, Angle Posts, Welded T-Posts, Heavy Duty H-Posts and a one-piece shelf clip with a complete line of accessories that can be added as your storage requirements change. Together, these high quality shelving components provide safe organized storage that is designed to allow for easy modifications and future expansion to meet your changing needs. Manufacturer Keywords: industrial shelving, multi-tier shelving, steel shelving, warehouse shelving, inventory shelving view less
Guardian Steel Locker and Steel Accessories Penco Products, Inc Standard Guardian lockers build upon the design features of the Vanguard series with several enhancements and options that give it a distinctive look. Our one piece deep drawn Classic III stainless steel recessed handle is part of every Guardian. It elim...view more Standard Guardian lockers build upon the design features of the Vanguard series with several enhancements and options that give it a distinctive look. Our one piece deep drawn Classic III stainless steel recessed handle is part of every Guardian. It eliminates protrusions from the locker front and accepts a padlock or a built-in lock. The 16 gauge door front has a solid exterior, aiding quiet operation. Ventilation is achieved by slots in the top and bottom flanges of the door. Medallion Option: This upgrade has a sound damping panel welded to the door reducing noise levels when doors are slammed. Guardian PLUS: This upgrade increases the thickness of the door to 14 gauge. The Guardian PLUS locker is ideally suited for corridors and situations where the locker is likely to encounter harsher than normal usage. Guardian Defiant II: This combines a 14 gauge door with a single point latch stainless steel pocket and a reinforcing pan that stiffens the door. • Knock Down Construction • Standard solid 16 ga. door and Classic III handle • 14 ga. door available • Optional Defiant II single point latching Manufacturer Keywords: school lockers, steel locker, corridor lockers, employee locker view less
Invincible II Steel Locker Penco Products, Inc Penco’s Invincible II athletic lockers are an exceptionally attractive and durable choice for gym lockers. Ideal for applications that require a high degree of ventilation and strength, or where visual inspection of locker contents is desired. Doors ...view more Penco’s Invincible II athletic lockers are an exceptionally attractive and durable choice for gym lockers. Ideal for applications that require a high degree of ventilation and strength, or where visual inspection of locker contents is desired. Doors are made from heavy 14 gauge steel. Sides, tops, bottoms and shelves are 16 gauge steel. Backs are 18 gauge. Doors and sides are perforated with a diamond-shaped pattern allowing maximum air circulation while maintaining security. Solid doors are an option. Invincible II lockers come in a variety of styles: 1 tier, 2 tier and 3 tier all have as standard the Classic III stainless steel recessed handle and multi-point latching. Standard 4, 5, 6, 8 and 9 tier box lockers doors have a padlock hasp and a friction catch, and will accept built-in locks. Available at extra cost is a spring-loaded catch. Both 2 & 3 tier lockers have horizontal frame members welded between the doors for added strength and security. 24” wide lockers have full width doors. If slope tops are required, use hoods. All lockers accept built-in locks or padlocks and have rubber bumpers on the latch hooks to reduce noise. • Knock Down Construction • Diamond perforations on door and sides • 14 ga. door, 16 ga. body & 18 ga. back • Classic III or Defiant II handle available on 1, 2 and 3 tier • Friction or spring latch on 4 through 9 tier Manufacturer Keywords: school locker, athletic locker, steel lockers view less
Pallet Rack Penco Products, Inc Penco Pallet Rack is a carefully engineered system designed to provide highly efficient storage of palletized items. Combining design and excellence with the use of high strength steel to achieve a superior strength to weight ratio, Penco Pallet Rack can ...view more Penco Pallet Rack is a carefully engineered system designed to provide highly efficient storage of palletized items. Combining design and excellence with the use of high strength steel to achieve a superior strength to weight ratio, Penco Pallet Rack can handle nearly any storage job you can give it. The basic components of Penco Pallet Rack are Upright Frames and Beams. Each is manufactured to exacting tolerances to provide many years of dependable service at their rated loads. Penco Pallet Rack Plus is engineered for use in areas where high seismic activity or other severe conditions exist. Load capacities are the same as the standard pallet rack shown in this catalog, however the frames and beams are more resistant to horizontal and vertical forces that could damage standard rack and its load. Manufacturer Keywords: industrial storage, steel pallet rack, warehouse pallet rack, inventory pallet rack view less
Patriot Duty Locker and Steel Accessories Penco Products, Inc Built for law enforcement applications, the big story behind the Duty Locker is actually under it. A 14 gauge welded shell, 16 gauge drawer and ball bearing glides provide at no less than 3.4 cubic feet of usable storage in the Patriot Duty Locker’s dra...view more Built for law enforcement applications, the big story behind the Duty Locker is actually under it. A 14 gauge welded shell, 16 gauge drawer and ball bearing glides provide at no less than 3.4 cubic feet of usable storage in the Patriot Duty Locker’s drawer base. The 33” deep base also accepts individual or continuous lengths of hardwood locker benches for seating (optional). • Construction – Welded or Knocked Down (KD) • Heights available – 60 or 72” • Widths available – 18 or 24” • Ventilation – Perforated top, hat shelf, louvered doors and drawer • Lockable compartments – Main doors, drawer and interior side compartment • Hanging – Heavy duty coat rod and hanging hooks • Latching – Cremone handle • Electrical Access – Single gang duplex knockout in top panel Manufacturer Keywords: steel lockers, first response locker, military locker, police locker view less
Patriot Gear Locker and Steel Accessories Penco Products, Inc A properly equipped double door Patriot Gear Locker can be the ideal solution for a variety of specialized storage challenges. The ample storage areas at both top and bottom of the 24” wide model shown on this page still leave almost 4 feet between the ...view more A properly equipped double door Patriot Gear Locker can be the ideal solution for a variety of specialized storage challenges. The ample storage areas at both top and bottom of the 24” wide model shown on this page still leave almost 4 feet between the shelves for hanging uniforms and other gear. • Construction – Welded or Knocked Down (KD) • Height available – 72”. Welded models are 76” with integrated base • Widths available – 18, 24, 30, 36, 42 or 48” • Ventilation – Louvered doors and diamond perforated sides • Lockable compartments – Main doors, optional security box, drawer or footlocker • Hanging – Heavy duty coat rod and hanging hooks • Latching – Cremone handle Manufacturer Keywords: steel lockers, first response locker, police locker, military locker, EMT locker, fire and rescue locker view less
Patriot Turnout Locker and Steel Accessories Penco Products, Inc The key to any turnout locker is the ability to grab and go. The Patriot Turnout Locker puts everything from flight gear to EMS equipment within reach. The open front and perforated sides aid in drying gear while available security boxes, drawers and foot...view more The key to any turnout locker is the ability to grab and go. The Patriot Turnout Locker puts everything from flight gear to EMS equipment within reach. The open front and perforated sides aid in drying gear while available security boxes, drawers and footlocker provide a secure space for personal items. • Construction – Welded or Knocked Down (KD) • Heights available – 72”. Welded models are 76” with integrated base • Widths available – 18, 24, 30, 36, 42 or 48” • Ventilation – Open front and diamond perforated sides • Lockable compartments – Optional security box, drawer or footlocker • Hanging – Heavy duty coat rod and hanging hooks • Latching – Open front Manufacturer Keywords: steel lockers, first response locker, police locker, military locker, EMT locker, fire and rescue locker view less
Rapid Response Duffel Locker Penco Products, Inc The Rapid Response Duffel Locker™ is designed to meet the needs of first responders for the secure and economical storage of their gear. Whether called to action or waiting for their return, these lockers will keep users’ belongings and gear safe and read...view more The Rapid Response Duffel Locker™ is designed to meet the needs of first responders for the secure and economical storage of their gear. Whether called to action or waiting for their return, these lockers will keep users’ belongings and gear safe and ready for that critical first response. These rapid response lockers are available in 2, 3 and 4 tier configurations in heights of 72", 78" and 84" with widths of 24", 30", 36", 42" and 48". Door ventilation options include solid, louver and diamond perforation. Rapid Response Duffel Lockers are available in Penco's 24 standard colors. Manufacturer Keywords: military lockers, police locker, fire gear locker, gear locker, TA-50 locker view less
RivetRite Industrial Shelving Penco Products, Inc We call RivetRite the Universal Shelf Framing System because so many storage requirements can be met with only a few simple components. RivetRite is engineered to provide safe, economical storage of virtually any type of hand-loaded material. Structural i...view more We call RivetRite the Universal Shelf Framing System because so many storage requirements can be met with only a few simple components. RivetRite is engineered to provide safe, economical storage of virtually any type of hand-loaded material. Structural integrity is ensured by a rigid boltless connection between beams and posts. RivetRite shelving is comprised of 4 types of posts for the vertical members and various horizontal support members. In this way it is possible to order by components to tailor the shelving to the items to be stored. Manufacturer Keywords: industrial shelving, multi-tier shelving, steel shelving, warehouse shelving, inventory shelving view less
Stadium Steel Locker and Accessories Penco Products, Inc Penco’s Stadium lockers are ideally suited for athletic team rooms, fire fighter’s equipment or any other application where easy access to uniforms and/or equipment is required. They are available in different configurations: the minimum configuration...view more Penco’s Stadium lockers are ideally suited for athletic team rooms, fire fighter’s equipment or any other application where easy access to uniforms and/or equipment is required. They are available in different configurations: the minimum configuration has a full width shelf, 2 coat hooks and a coat rod. You can add a lockable security box, a lockable foot locker that doubles as a bench, or both. The open front and diamond perforated sides create full ventilation while allocating a specific storage space to each individual. Fully accessorized, Stadium lockers are outfitted with a security box fastened to a full width shelf, and a footlocker with a hinged, reinforced seat at the base. Both compartments are lockable to secure valuable items. The front of the footlocker is recessed for an external padlock, and a stainless steel strike plate protects the finish. The footlocker design saves floor space by eliminating the clutter of open locker doors and the need for separate locker room benches. • Knocked down or welded construction • Open fronts and smooth frame channels • 2 lockable compartment options • 18”, 24” and 33” wide models • Tops, bottoms, sides, shelf and frames are 16 gauge • Back is 18 gauge Manufacturer Keywords: school locker, athletic locker, steel lockers, police locker, emergency response locker view less
Vanguard Steel Locker and Steel Accessories Penco Products, Inc The Vanguard line is Penco’s traditional range of steel lockers designed for many uses including school corridor lockers and employee lockers. Each latch hook features a noise-reducing rubber bumper for quieter operation. The welded door frames have ...view more The Vanguard line is Penco’s traditional range of steel lockers designed for many uses including school corridor lockers and employee lockers. Each latch hook features a noise-reducing rubber bumper for quieter operation. The welded door frames have mortise and tenon construction and are spot welded for lifetime rigidity. Every door has a continuous door strike. All hinges are full loop, 5-knuckle design. • Knocked Down Construction • Standard louvers for ventilation • Handle options: Classic III, Die-Cast or Friction Catch (3 Tier to 6 Tier) • Classic III handle standard on QuickShip multi-point latch models • 24 ga. body painted to match door frame • Many sizes available through QuickShip Manufacturer Keywords: school lockers, hospital lockers, employee lockers, steel lockers view less
Wide Span Industrial Shelving Penco Products, Inc Penco Wide Span is the standard of the industry for shelving designed to contain wide, bulky loads. It bridges the storage gap between conventional shelving and pallet rack. The range of applications can be from a single unit (right) to a sophisticated m...view more Penco Wide Span is the standard of the industry for shelving designed to contain wide, bulky loads. It bridges the storage gap between conventional shelving and pallet rack. The range of applications can be from a single unit (right) to a sophisticated multi-level picking system (bottom). Penco Wide Span is easily the quickest shelving product to assemble. There are a minimum number of parts that snap or fit into place quickly and easily. No bracing to add and no hardware required. Not to be loaded with fork trucks. Manufacturer Keywords: industrial shelving, multi-tier shelving, steel shelving, warehouse shelving, inventory shelving view less