UL Prospector

Success!

Successfully saved your search
1" Mold Defense Shaftliner Type X Continental Building Products 1" Mold Defense Shaftliner Type X is designed for use in lining elevator shafts, ventilation shafts, and stairwells; for area separation walls for residential housing; and for other interior building applications requiring fire resistance. Meets ASTM C 1...view more 1" Mold Defense Shaftliner Type X is designed for use in lining elevator shafts, ventilation shafts, and stairwells; for area separation walls for residential housing; and for other interior building applications requiring fire resistance. Meets ASTM C 1396 Section 6, Type X Mold Resistance per ASTM D 3273 - score 10 Manufacturer Keywords: shaft liner  view less
1" Shaftliner Type X Continental Building Products 1" Shaftliner Type X is designed for use in lining elevator shafts, ventilation shafts, and stairwells; for area separation walls for residential housing; and for other interior building applications requiring fire resistance. Meets ASTM C 1396 Section 6...view more 1" Shaftliner Type X is designed for use in lining elevator shafts, ventilation shafts, and stairwells; for area separation walls for residential housing; and for other interior building applications requiring fire resistance. Meets ASTM C 1396 Section 6, Type X Manufacturer Keywords: shaft liner  view less
1/2" Firecheck Type C Continental Building Products 1/2" Firecheck Type C is a gypsum board enhanced with glass fibers and other ingredients for premium fire protection for interior walls, ceilings and area separations. Exceeds ASTM C 1396 Section 5, Type X Manufacturer Keywords: gypsum board type C
1/2" Guard Rey Panel Rey SA Guard Rey mold resistant drywall, made by Panel Rey®, are specially designed to provide protection against the growth of mold and microscopic fungi that is hazardous to your health. The Guard Rey® resistant drywall is formed essentially by a fireproof cor...view more Guard Rey mold resistant drywall, made by Panel Rey®, are specially designed to provide protection against the growth of mold and microscopic fungi that is hazardous to your health. The Guard Rey® resistant drywall is formed essentially by a fireproof core made of gypsum, which is specially treated to be waterproof and has been treated with biocide to limit the development of colonies of microorganisms. In this way, it limits the absorption of moisture from the environment. Both of its sides are covered with 100% recycled paper. This protects both, the front and the back of the product. For more information about the development and growth of Guard Rey®, Panel Rey® recommends the joints to be treated with any of our paste compounds for their high level of biocide protection, or with powder compounds with Easy Set controlled setting, since it is practically not affected by moisture. Manufacturer Keywords: Board, Guard, Mold, Residential, Commercial  view less
1/2" LiftLite Continental Building Products 1/2" Light weight gypsum board 25% lighter than regular gypsum board sag resistant Manufacturer Keywords: gypsum board, drywall, light
1/2" Mold Defense Continental Building Products 1/2" Mold Defense is designed for use in interior wall and ceiling applications and offers enhanced protection against mold and mildew. It contains a non-combustible mold, mildew and moisture treated gypsum core and treated face paper. Meets ASTM C 1396 ...view more 1/2" Mold Defense is designed for use in interior wall and ceiling applications and offers enhanced protection against mold and mildew. It contains a non-combustible mold, mildew and moisture treated gypsum core and treated face paper. Meets ASTM C 1396 Section 7 Mold Resistance per ASTM D 3273 - score 10 Manufacturer Keywords: mold resistant  view less
1/2" Plasterbase Continental Building Products 1/2" Plasterbase is a base layer gypsum board for interior veneer plaster-finished walls and ceilings. The board has a non-combustible gypsum core, covered with paper facing. Meets ASTM C 1396 Section 10 Manufacturer Keywords: gypsum base for veneer...view more 1/2" Plasterbase is a base layer gypsum board for interior veneer plaster-finished walls and ceilings. The board has a non-combustible gypsum core, covered with paper facing. Meets ASTM C 1396 Section 10 Manufacturer Keywords: gypsum base for veneer plaster  view less
1/2" Rapid Deco Level 5 Continental Building Products 1/2" Rapid Deco Level 5 System consists of a skim-coated drywall and a specially formulated matching joint compound. This innovative system is designed to provide an equivalent substitution to a field applied Level 5 finish. Meets ASTM C 1396 Section 5 ...view more 1/2" Rapid Deco Level 5 System consists of a skim-coated drywall and a specially formulated matching joint compound. This innovative system is designed to provide an equivalent substitution to a field applied Level 5 finish. Meets ASTM C 1396 Section 5 Manufacturer Keywords: skim coat Level 5 finish  view less
1/2" Rapid Deco Level 5 with Mold Defense Continental Building Products Provides an equivalent to a filed applied Level 5 finish. Mold and mildew resistant - 10 out of 10 per ASTM D 3273 Manufacturer Keywords: Level 5 Mold and mildew resistant
1/2" Regular Drywall Continental Building Products 1/2" Regular Drywall is designed for interior walls and ceilings. It contains a non-combustible gypsum core and is covered with paper facing on the front and back. Meets ASTM C 1396 Section 5 Manufacturer Keywords: gypsum board regular
1/2" Sagcheck Continental Building Products 1/2" Sagcheck is a strengthened, sag resistant gypsum board for interior ceiling applications. It is designed to be sag resistant under high-humidity conditions and wet-application texturing. Meets ASTM C 1396 Section 12 Manufacturer Keywords: sag-r...view more 1/2" Sagcheck is a strengthened, sag resistant gypsum board for interior ceiling applications. It is designed to be sag resistant under high-humidity conditions and wet-application texturing. Meets ASTM C 1396 Section 12 Manufacturer Keywords: sag-resistant ceiling board  view less
1/2" Soffitboard Continental Building Products 1/2" Soffitboard is a weather resistant gypsum board for sheltered exterior ceiling and soffit areas such as carports, covered walkways, parking areas, open porches, and the soffit side of eaves. Meets ASTM C 1396 Section 8 Manufacturer Keywords: ex...view more 1/2" Soffitboard is a weather resistant gypsum board for sheltered exterior ceiling and soffit areas such as carports, covered walkways, parking areas, open porches, and the soffit side of eaves. Meets ASTM C 1396 Section 8 Manufacturer Keywords: exterior gypsum soffit board  view less
1/2" Weather Defense Platinum Interior Continental Building Products A glass mat faced interior gypsum board with a moisture resistant core. Mold resistant 10 out of 10 per ASTM D 3273 Manufacturer Keywords: interior, glass mat, mold resistant,
1/2'' Ceiling Rey Panel Rey SA It has a dimensionally stable and fireproof gypsum core, produced and reinforced with fiberglass and additives that increase its resistance to deflection (sagging) even when installed in conditions with severe moisture, load and spacing between supports. ...view more It has a dimensionally stable and fireproof gypsum core, produced and reinforced with fiberglass and additives that increase its resistance to deflection (sagging) even when installed in conditions with severe moisture, load and spacing between supports. Covered on both sides with 100% recycled paper, and has beveled edges. It costs and weighs less than Type X 5/8’’ boards, and has an equivalent performance when subjected to deflection tests. Manufacturer Keywords: 1/2 CLR  view less
1/2'' Exterior Rey Panel Rey SA This product is ideal for being installed on the exposed parts of wall frames, under other exterior materials such as wood, metal, brick façades and stucco. The product has a fireproof, water-repellent core, reinforced with fibers and additives, and a...view more This product is ideal for being installed on the exposed parts of wall frames, under other exterior materials such as wood, metal, brick façades and stucco. The product has a fireproof, water-repellent core, reinforced with fibers and additives, and adds strength and resistance against fires. Covered on both sides with 100% recycled paper. The paper on the front sides covers the entire length of the beveled edges for greater strength and protection of the core. The edges are carefully ground in a square cut. This product is available in a variety of standard lengths and thicknesses for use in construction. This product does not contain asbestos. Manufacturer Keywords: 1/2 EXT  view less
1/2'' Fire Rey Panel Rey SA This board has a fireproof core essentially made of gypsum, reinforced with additional fibers that are resistant to high temperatures. They give the boards more strength and resistance against fires when used in previously evaluated assemblies. Cover...view more This board has a fireproof core essentially made of gypsum, reinforced with additional fibers that are resistant to high temperatures. They give the boards more strength and resistance against fires when used in previously evaluated assemblies. Covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. Manufacturer Keywords: 1/2 RF  view less
1/2'' Fire Rey C Panel Rey SA The Type C board has a core essentially made of gypsum, reinforced with fibers that are resistant to high temperatures and special additives for more resistance and performance against traditional fireproof products. Covered on both sides with 100% r...view more The Type C board has a core essentially made of gypsum, reinforced with fibers that are resistant to high temperatures and special additives for more resistance and performance against traditional fireproof products. Covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. The product is offered in a variety of standard lengths and thicknesses of 1/2” and 5/8". Manufacturer Keywords: 1/2 PRC  view less
1/2'' Light Rey Panel Rey SA The Light Rey® light gypsum board has a fireproof core essentially made of gypsum, covered on both sides with 100% recycled paper. The paper on its sides covers the entire length of the beveled edges of the board for greater strength and protection of the...view more The Light Rey® light gypsum board has a fireproof core essentially made of gypsum, covered on both sides with 100% recycled paper. The paper on its sides covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. Light Rey® Gypsum board is offered in a variety of standard lengths and thicknesses for use in construction. Manufacturer Keywords: 1/2 LWC  view less
1/2'' Mold Rey Panel Rey SA This product protects against harmful mold and microscopic fungi, and also offers fire protection features. The product has a fireproof, water-repellent core, reinforced with fibers, and adds strength and resistance against fires. Covered on both side...view more This product protects against harmful mold and microscopic fungi, and also offers fire protection features. The product has a fireproof, water-repellent core, reinforced with fibers, and adds strength and resistance against fires. Covered on both sides with 100% recycled paper, treated with biocide to prevent microorganisms, and protects both sides of the product. This product does not contain asbestos. The orange paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. The product is offered in a variety of standard lengths and thicknesses for construction. Manufacturer Keywords: 1/2 MDR  view less
1/2'' Regular Panel Rey SA Is a product that consists of a fireproof core made essentially of gypsum covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the cor...view more Is a product that consists of a fireproof core made essentially of gypsum covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. This product is offered in a variety of standard lengths and thicknesses to be used for construction, and it has the advantages of being cost-effective and fast, clean and safe to install. It can also be used with different types of finishing. - See more at: http://www.panelrey.com/en/content/regular-gypsum-board-0#sthash.Y7l9e7eS.dpuf Manufacturer Keywords: 1/2 STD  view less
1/2'' Water Rey Panel Rey SA Moisture resistant. Manufacturer Keywords: 1/2 RHX
1/2” Interior Ceiling Board American Gypsum Company Interior Ceiling Board is specifically formulated to meet the need for a lower weight ceiling panel with increased integrity in its gypsum core, making its sag resistance equivalent to a 5/8" thick Type X wallboard. For interior ceilings where framing spa...view more Interior Ceiling Board is specifically formulated to meet the need for a lower weight ceiling panel with increased integrity in its gypsum core, making its sag resistance equivalent to a 5/8" thick Type X wallboard. For interior ceilings where framing spans up to 24" o/c, Interior Ceiling Board is the ideal choice, especially when water-based textures are to be used. The lighter weight 1/2" Interior Ceiling Board is specifically designed for interior ceilings in standard residential and commercial applications as well as the modular and manufactured housing industry. Manufacturer Keywords: Drywall Rock Sheetrock Wallboard Mold Mold resistant Type X Sag resistant Ceiling board  view less
1/2” M-Bloc® with Mold & Moisture Resistance American Gypsum Company The M-Bloc® gypsum wallboard panel provides extra protection against mold, mildew and moisture. A lightweight cost efficient interior wall or ceiling panel for use in new construction or renovation work. M-Bloc® is mold and moisture resistant and can be u...view more The M-Bloc® gypsum wallboard panel provides extra protection against mold, mildew and moisture. A lightweight cost efficient interior wall or ceiling panel for use in new construction or renovation work. M-Bloc® is mold and moisture resistant and can be used throughout a project as well as the adhesive application of ceramic or plastic tile and plastic faced wall panels in limited wet areas, e.g., bathrooms, kitchens, laundry, and utility rooms.This 1/2” thick panel is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces. It may be finished the same as regular gypsum wallboard and accepts a wide variety of attractive finishes. Manufacturer Keywords: Drywall Rock Sheetrock Wallboard Mold Mold resistant  view less
1/4" Regular Drywall Continental Building Products 1/4" Regular Drywall is designed for interior walls. It contains a non-combustible gypsum core and is covered with paper facing on the front and back. Meets ASTM C 1396 Section 5 Manufacturer Keywords: gypsum board regular
1/4'' Flex Rey Panel Rey SA Is a consistent non-combustible gypsum core made essentially covered on both sides with 100% recycled paper product. Designed specially for cover and protect walls and curved skies and bows. Manufacturer Keywords: 1/4 FLX
12 oz. and 24 oz. Titebond WeatherMaster X-Treme Multi-Purpose Foam Franklin International Titebond WeatherMaster X-Treme Multi-Purpose Foam is specifically designed for low humidity and x-treme temperatures. This one-component low pressure polyurethane fills and seals gaps to prevent air infiltration. It is quick setting and expands 3x its siz...view more Titebond WeatherMaster X-Treme Multi-Purpose Foam is specifically designed for low humidity and x-treme temperatures. This one-component low pressure polyurethane fills and seals gaps to prevent air infiltration. It is quick setting and expands 3x its size. Manufacturer Keywords: Titebond, Titebond X-treme, Titebond extreme, Titebond X-treme multi-purpose, multi-purpose, multipurpose, foam, polyurethane foam, WeatherMaster view less
12 oz. and 24 oz. Titebond WeatherMaster X-Treme Window & Door Foam Franklin International Titebond WeatherMaster X-Treme Window & Door is a one-component low pressure polyurethane foam that is specifically designed to fill opening around windows and doors and stops moisture. This product provides a low pressure build and is quick setting. M...view more Titebond WeatherMaster X-Treme Window & Door is a one-component low pressure polyurethane foam that is specifically designed to fill opening around windows and doors and stops moisture. This product provides a low pressure build and is quick setting. Manufacturer Keywords: Titebond, Titebond X-treme, Titebond extreme, Titebond X-treme window & door, window & door, window and door, foam, polyurethane foam, WeatherMaster  view less
12 oz. and 24oz. WeatherMaster X-Treme Fire Block Foam Franklin International WeatherMaster X-Treme Fireblock is a one-component polyurethane foam specifically designed and colored orange that bonds, seals, fills, insulates and prevents air infiltration. It offers high yield and will expand 3x its size. This product is for use in T...view more WeatherMaster X-Treme Fireblock is a one-component polyurethane foam specifically designed and colored orange that bonds, seals, fills, insulates and prevents air infiltration. It offers high yield and will expand 3x its size. This product is for use in Type V residential construction. Manufacturer Keywords: Titebond, Titebond X-treme, Titebond extreme, Titebond X-treme Fireblock, Fireblock, foam, polyurethane foam, WeatherMaster  view less
3/4" Ultra-Shield National Gypsum Company Gold Bond Brand 3/4" Ultra-Shield FS Gypsum Board panels consist of a fire-resistant gypsum core encased in heavy, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the en...view more Gold Bond Brand 3/4" Ultra-Shield FS Gypsum Board panels consist of a fire-resistant gypsum core encased in heavy, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Long edges of the panels are tapered. Manufacturer Keywords: 3/4" Ultra-Shield  view less
3/8" Regular Drywall Continental Building Products 3/8" Regular Drywall is designed for interior walls and ceilings. It contains a non-combustible gypsum core and is covered with paper facing on the front and back. Meets ASTM C 1396 Section 5 Manufacturer Keywords: gypsum board regular
3/8'' Regular Panel Rey SA Regular 3/8 3 thikness gypsum board. Manufacturer Keywords: 3/8 STD
3/8'' Water Rey Panel Rey SA A specially processed board to provide a base surface in the application of adhesives for ceramic or plastic tiles, in areas exposed to limited moisture, such as shower stalls, near sinks, in dressing rooms, bathrooms, kitchens, laundry rooms and storage ...view more A specially processed board to provide a base surface in the application of adhesives for ceramic or plastic tiles, in areas exposed to limited moisture, such as shower stalls, near sinks, in dressing rooms, bathrooms, kitchens, laundry rooms and storage rooms. It has a fireproof core specially treated to repel water, covered on both sides with 100% recycled paper and treated to resist moisture. The green paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. Manufacturer Keywords: 3/8'' RH  view less
5/16" SoundBreak XP RetroFit National Gypsum Company Gold Bond Brand SoundBreak XP RetroFit Gypsum Board is an acoustically enhanced board that creates a constrained damping layer in order to improve the acoustical performance of a gypsum board wall when attached to the existing surface. Manufacturer Key...view more Gold Bond Brand SoundBreak XP RetroFit Gypsum Board is an acoustically enhanced board that creates a constrained damping layer in order to improve the acoustical performance of a gypsum board wall when attached to the existing surface. Manufacturer Keywords: 5/16", SoundBreak, RetroFit, Sound Damping Panel, Acoustical Performance  view less
5/8" Exterior Soffit C Panel Rey SA Panel Rey’s Exterior Soffit C is a product with a fireproof core essentially made of gypsum and reinforced with the addition of high temperature resistant fibers and special additives to provide a higher resistance and performance. The drywall is covered ...view more Panel Rey’s Exterior Soffit C is a product with a fireproof core essentially made of gypsum and reinforced with the addition of high temperature resistant fibers and special additives to provide a higher resistance and performance. The drywall is covered on both sides with 100% recycled paper. The paper, on the front, covers the beveled edges to strengthen and protect the core. The ends are square cut and finished smooth. Panel Rey Exterior Soffit C board is offered in a wide variety of standard lengths and thickness of 5/8”. Panel Rey products do not contain asbestos. Manufacturer Keywords: Board, Soffit, Exterior, Residential, Commercial, PRC2  view less
5/8" Exterior Soffit X Panel Rey SA Panel Rey’s Exterior Soffit X is a product with a fireproof core essentially made of gypsum and reinforced with the addition of high temperature resistant fibers and special additives to provide a higher resistance and performance. The drywall is covered ...view more Panel Rey’s Exterior Soffit X is a product with a fireproof core essentially made of gypsum and reinforced with the addition of high temperature resistant fibers and special additives to provide a higher resistance and performance. The drywall is covered on both sides with 100% recycled paper. The paper, on the front, covers the beveled edges to strengthen and protect the core. The ends are square cut and finished smooth. Panel Rey Exterior Soffit X/Exterior Soffit C board is offered in a wide variety of standard lengths and thickness of 5/8”. Panel Rey products do not contain asbestos. Manufacturer Keywords: Board, Exterior, Soffit, Residential, Commercial, PRX  view less
5/8" Firecheck Plasterbase Type X Continental Building Products 5/8" Firecheck Plasterbase Type X is a base layer gypsum board for interior veneer plaster-finished walls and ceilings. The board has a non-combustible gypsum core, covered with paper facing. Meets ASTM C 1396 Section 10, Type X Manufacturer Keywords:...view more 5/8" Firecheck Plasterbase Type X is a base layer gypsum board for interior veneer plaster-finished walls and ceilings. The board has a non-combustible gypsum core, covered with paper facing. Meets ASTM C 1396 Section 10, Type X Manufacturer Keywords: gypsum base for veneer plaster type X  view less
5/8" Firecheck Soffitboard Type X Continental Building Products 5/8" Firecheck Soffitboard Type X is a fire and weather resistant gypsum board for sheltered exterior ceiling and soffit areas such as carports, covered walkways, parking areas, open porches, and the soffit side of eaves. Meets ASTM C 1396 Section 8, Type...view more 5/8" Firecheck Soffitboard Type X is a fire and weather resistant gypsum board for sheltered exterior ceiling and soffit areas such as carports, covered walkways, parking areas, open porches, and the soffit side of eaves. Meets ASTM C 1396 Section 8, Type X Manufacturer Keywords: exterior gypsum soffit board type X  view less
5/8" Firecheck Type C Continental Building Products 5/8" Firecheck Type C is a gypsum board enhanced with glass fibers and other ingredients for premium fire protection for interior walls, ceilings and area separations. Exceeds ASTM C 1396 Section 5, Type X Manufacturer Keywords: gypsum board type C
5/8" Firecheck Type X Continental Building Products 5/8" Firecheck Type X is a gypsum board enhanced with glass fibers to offer greater strength and fire protection for interior walls and ceilings. Meets ASTM C 1396 Section 5, Type X Manufacturer Keywords: gypsum board type x
5/8" Guard Rey X Panel Rey SA Guard Rey X mold resistant drywall, made by Panel Rey®, are specially designed to provide protection against the growth of mold and microscopic fungi that is hazardous to your health. The Guard Rey® resistant drywall is formed essentially by a fireproof c...view more Guard Rey X mold resistant drywall, made by Panel Rey®, are specially designed to provide protection against the growth of mold and microscopic fungi that is hazardous to your health. The Guard Rey® resistant drywall is formed essentially by a fireproof core made of gypsum, which is specially treated to be waterproof and has been treated with biocide to limit the development of colonies of microorganisms. In this way, it limits the absorption of moisture from the environment. Both of its sides are covered with 100% recycled paper. This protects both, the front and the back of the product. For more information about the development and growth of Guard Rey®, Panel Rey® recommends the joints to be treated with any of our paste compounds for their high level of biocide protection, or with powder compounds with Easy Set controlled setting, since it is practically not affected by moisture. Manufacturer Keywords: Board,Guard, Residential, Commercial, MDX  view less
5/8" LiftLite Firecheck 30 Continental Building Products 5/8" LiftLite Firecheck 30 is up to 30% lighter than standard 5/8" type X gypsum board. Reducing labor and speeding construction when a 5/8" Type X is not required. Meets ASTM C1396/C1396M Section 5 Manufacturer Keywords: gypsum board
5/8" Mold Defense Type X Continental Building Products 5/8" Mold Defense Type X is designed for use in interior wall and ceiling applications and offers enhanced protection against mold and mildew. It contains a non-combustible mold, mildew and moisture treated gypsum core and treated face paper. Meets ASTM ...view more 5/8" Mold Defense Type X is designed for use in interior wall and ceiling applications and offers enhanced protection against mold and mildew. It contains a non-combustible mold, mildew and moisture treated gypsum core and treated face paper. Meets ASTM C 1396 Section 7, Type X Mold Resistance per ASTM D 3273 - score 10 Manufacturer Keywords: mold resistant type x  view less
5/8" Protecta AR 100 with Mold Defense Continental Building Products Protecta AR 100 with Mold Defense is an abuse resistant drywall consisting of a fiberglass-enhanced non-combustible high-density gypsum core with a reinforced heavy facing paper.Meets ASTM C 1396 Section 5, Type X Mold resistance tested to ASTM D 3273 - ...view more Protecta AR 100 with Mold Defense is an abuse resistant drywall consisting of a fiberglass-enhanced non-combustible high-density gypsum core with a reinforced heavy facing paper.Meets ASTM C 1396 Section 5, Type X Mold resistance tested to ASTM D 3273 - score 10 Abuse resistance per ASTM C 1629 Soft body Level 2 Hard Body Level 1 Manufacturer Keywords: abuse resistant gypsum board type X  view less
5/8" Protecta HIR 300 Type X with Mold Defense Continental Building Products High Impact resistant Meets ASTM C 1629 hard and soft body impact Level 3 Type X for fire rating Mold and mildew resistant - 10 out of 10 per ASTM D3273 Manufacturer Keywords: High impact Level 3 hard body Level 3 soft body Mold and mildew resist...view more High Impact resistant Meets ASTM C 1629 hard and soft body impact Level 3 Type X for fire rating Mold and mildew resistant - 10 out of 10 per ASTM D3273 Manufacturer Keywords: High impact Level 3 hard body Level 3 soft body Mold and mildew resistant  view less
5/8" Rapid Deco Level 5 Type X Continental Building Products 5/8" Rapid Deco Level 5 Type X System consists of a skim-coated drywall and a specially formulated matching joint compound. This innovative system is designed to provide an equivalent substitution to a field applied Level 5 finish. Meets ASTM C 1396 Sect...view more 5/8" Rapid Deco Level 5 Type X System consists of a skim-coated drywall and a specially formulated matching joint compound. This innovative system is designed to provide an equivalent substitution to a field applied Level 5 finish. Meets ASTM C 1396 Section 5 Manufacturer Keywords: skim coat Level 5 type X  view less
5/8" Rapid Deco Level 5 Type X with Mold Defense Continental Building Products Type X fire-rated Provides an equivalent to a field-applied Level 5 finish. Mold and mildew resistant - 10 out of 10 per ASTM D 3273 Manufacturer Keywords: Type X Level 5 Mold and mildew resistant
5/8" Weather Defense Platinum Interior Type X Continental Building Products A glass mat faced interior board with a moisture resistant core. Mold resistant scoring 10 out of 10 per ASTM D3273. Fire rated and listed with UL. Manufacturer Keywords: interior, glass mat, mold resistant, fire rated
5/8'' Exterior Rey Panel Rey SA This product is ideal for being installed on the exposed parts of wall frames, under other exterior materials such as wood, metal, brick façades and stucco. Covered on both sides with 100% recycled paper. The paper on the front sides covers the entire...view more This product is ideal for being installed on the exposed parts of wall frames, under other exterior materials such as wood, metal, brick façades and stucco. Covered on both sides with 100% recycled paper. The paper on the front sides covers the entire length of the beveled edges for greater strength and protection of the core. The edges are carefully ground in a square cut. This product is available in a variety of standard lengths and thicknesses for use in construction. This product does not contain asbestos. Manufacturer Keywords: 5/8 EXT  view less
5/8'' Exterior Rey X Panel Rey SA Moisture and fire resistant for exterior Manufacturer Keywords: 5/8 ETX
5/8'' Fire Rey C Panel Rey SA The Type C board has a core essentially made of gypsum, reinforced with fibers that are resistant to high temperatures and special additives for more resistance and performance against traditional fireproof products. Covered on both sides with 100% r...view more The Type C board has a core essentially made of gypsum, reinforced with fibers that are resistant to high temperatures and special additives for more resistance and performance against traditional fireproof products. Covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. The product is offered in a variety of standard lengths and thicknesses of 1/2” and 5/8". Manufacturer Keywords: 5/8 PRC  view less
5/8'' Fire Rey X Panel Rey SA This board has a fireproof core essentially made of gypsum, reinforced with additional fibers that are resistant to high temperatures. They give the boards more strength and resistance against fires when used in previously evaluated assemblies. Covered ...view more This board has a fireproof core essentially made of gypsum, reinforced with additional fibers that are resistant to high temperatures. They give the boards more strength and resistance against fires when used in previously evaluated assemblies. Covered on both sides with 100% recycled paper. The paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. Manufacturer Keywords: 5/8 PRX  view less
5/8'' Mold Rey X Panel Rey SA Mold and fire resistant Manufacturer Keywords: 5/8 MDX
5/8'' Regular Panel Rey SA Panel Rey’s Regular Drywall is a product with a fireproof core essentially made of gypsum and covered in both sides with 100% recycled paper. The paper on the face covers the beveled edges to strengthen and protect the core. The ends are carefully grinded...view more Panel Rey’s Regular Drywall is a product with a fireproof core essentially made of gypsum and covered in both sides with 100% recycled paper. The paper on the face covers the beveled edges to strengthen and protect the core. The ends are carefully grinded in square cut. The Panel Rey® standard drywall is offered in a wide variety of standard lengths and thicknesses to be used in the construction field and has the good characteristic of being cost-effective, fast, clean and safe to install; as well as the capacity to be used with different types of finishing. Manufacturer Keywords: 5/8 STD  view less
5/8'' Water Rey Panel Rey SA A specially processed board to provide a base surface in the application of adhesives for ceramic or plastic tiles, in areas exposed to limited moisture, such as shower stalls, near sinks, in dressing rooms, bathrooms, kitchens, laundry rooms and storage ...view more A specially processed board to provide a base surface in the application of adhesives for ceramic or plastic tiles, in areas exposed to limited moisture, such as shower stalls, near sinks, in dressing rooms, bathrooms, kitchens, laundry rooms and storage rooms. It has a fireproof core specially treated to repel water, covered on both sides with 100% recycled paper and treated to resist moisture. The green paper on its front side covers the entire length of the beveled edges of the board for greater strength and protection of the core. The edges are carefully ground in a square cut. Manufacturer Keywords: 5/8'' RH  view less
5/8'' Water Rey X Panel Rey SA Moisture and fire resistant Manufacturer Keywords: 5/8 RHX
5/8” M-Bloc® Type X with Mold & Moisture Resistance American Gypsum Company M-Bloc® Type X gypsum wallboard panel provides extra protection against mold, mildew and moisture. A lightweight cost efficient interior wall or ceiling panel for use in new construction or renovation work that often require specific fire rated assemblies...view more M-Bloc® Type X gypsum wallboard panel provides extra protection against mold, mildew and moisture. A lightweight cost efficient interior wall or ceiling panel for use in new construction or renovation work that often require specific fire rated assemblies. M-Bloc® is mold and moisture resistant and can be used throughout a project as well as the adhesive application of ceramic or plastic tile and plastic faced wall panels in limited wet areas, e.g., bathrooms, kitchens, laundry, and utility rooms.This 5/8” thick panel is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces. It may be finished the same as regular gypsum wallboard and accepts a wide variety of attractive finishes. Manufacturer Keywords: Drywall Rock Sheetrock Wallboard Mold Mold resistant Type X  view less
ACFoam-HD Coverboard Atlas Roofing Foam Manufacturer Keywords: Foam, Polyiso, coated glass facer
ACFoam-II Atlas Roofing Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt facers. ACFoam®-II is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available ...view more Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt facers. ACFoam®-II is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 1, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3. Manufacturer Keywords: Roof Insulation, Foam, Polyiso view less
ACFoam-III Atlas Roofing Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam®-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm ...view more Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam®-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 2, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3. Manufacturer Keywords: Foam, polyiso, coated glass facers view less
AD Panel ready mix Panel Rey SA ADPanel is an adhesive designed to bond gypsum boards on masonry, brick and concrete walls; ADPanel ready mix presentation ensure the grip of the plasterboard to the substrate, as long as they are applied according to the procedure established by Panel Re...view more ADPanel is an adhesive designed to bond gypsum boards on masonry, brick and concrete walls; ADPanel ready mix presentation ensure the grip of the plasterboard to the substrate, as long as they are applied according to the procedure established by Panel Rey. Manufacturer Keywords: Adhesive, AD Panel, Ready Mix  view less
AERO-ROOF Aeroflex Co.,Ltd AERO-ROOF is insulation sheet laminated with aluminum foil and reinforced fiber. It is a lightweight insulation installed under the roof of the buildings to reduce heat from sunlight. AERO-ROOF is a thermal- setting material made of special synthetic rubb...view more AERO-ROOF is insulation sheet laminated with aluminum foil and reinforced fiber. It is a lightweight insulation installed under the roof of the buildings to reduce heat from sunlight. AERO-ROOF is a thermal- setting material made of special synthetic rubber mixed with flame retardants, making it non-melt and non-flame spread when burnt. AERO-ROOF is closed cell filled with dry air, laminated with aluminum foil that enhances indoor light reflection. It is safe and easy to install with many advantages as follow. Manufacturer Keywords: Closed cell Elastomeric insulation for roofing system view less
AEROFLEX Aeroflex Co.,Ltd AEROFLEX® is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water pipings and air duct system in HVAC&R industry. AEROFLEX is the ideal EPDM insulation with outstanding physical properties, which has...view more AEROFLEX® is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water pipings and air duct system in HVAC&R industry. AEROFLEX is the ideal EPDM insulation with outstanding physical properties, which has complete cross-linking closed cell structure, low density, low and stable thermal conductivity, wide continuous service temperature (-57˚C to +125˚C), low water absorption (ASTM D1056), low water vapor permeability (ASTM E96), excellent ozone and weather resistance, self-extinguishing (ASTM D635), flame proof 25/50 (ASTM E84), no corrosion on copper pipe, ozone friendly (CFC, HFC, HCFC Free), non-polar with longer service life and complies to major international quality standards. AEROFLEX® provides the most available sizes from 3mm (1/8") ID to 204mm (8") ID with thickness from 3mm (1/8") to 75mm (3"). All these advantages make AEROFLEX® widely recognized and installed in many high standard buildings for energy saving and prevent condensation. Moreover, the manufacturing facilities are located across the continents including USA, China, India, Germany, Switzerland, Russia and Thailand. Manufacturer Keywords: EPDM synthetic rubber thermal insulation  view less
AEROFLEX-AC/DI Aeroflex Co.,Ltd AEROFLEX-AC/DI is a fully flexible, closed cell, light weight EPDM elastomeric thermal insulation designed for insulating hot and cold air duct systems. Its excellent insulating properties help save energy and prevent condensation problems. AEROFLEX-AC/DI...view more AEROFLEX-AC/DI is a fully flexible, closed cell, light weight EPDM elastomeric thermal insulation designed for insulating hot and cold air duct systems. Its excellent insulating properties help save energy and prevent condensation problems. AEROFLEX-AC/DI provides many advantages over most fibrous, rigid or semi-rigid thermal insulation such as: Excellent water vapor resistance; Low and stable thermal conductivity (K. value) during service life due to closed cell structure; Excellent flexibility makes installation work easy and neat; Non fibrous insulation; does not cause skin irritation or any other health hazards. Manufacturer Keywords: EPDM synthetic rubber thermal insulation view less
AEROFLEX-EP Aeroflex Co.,Ltd AEROFLEX-EP is an EPDM based closed cell elastomeric thermal insulation specially formulated to meet Factory Mutual Approvals. FM has approved AEROFLEX-EP that it will not contribute significant fire according to FM fire test methods: UBC 26-3 Room Fire T...view more AEROFLEX-EP is an EPDM based closed cell elastomeric thermal insulation specially formulated to meet Factory Mutual Approvals. FM has approved AEROFLEX-EP that it will not contribute significant fire according to FM fire test methods: UBC 26-3 Room Fire Test and Factory Mutual Approvals Full Scale Horizontal Simulated Pipe Chase Test. AEROFLEX-EP elastomeric thermal insulation tube and sheet are used to save energy and prevent condensation on chilled water and refrigeration system. They also efficiently reduce heat flow on hot water plumbing, liquid heating and dual-temperature piping Manufacturer Keywords: EPDM synthetic rubber thermal insulation view less
AEROFLEX-FO Aeroflex Co.,Ltd Aeroflex-FO is a light weight, flexible closed cell elastomeric thermal insulation in both sheet and tube form designed for insulating liquid cooling and heating pipe lines and also air ducting system to save energy and prevent condensation. Aeroflex-F...view more Aeroflex-FO is a light weight, flexible closed cell elastomeric thermal insulation in both sheet and tube form designed for insulating liquid cooling and heating pipe lines and also air ducting system to save energy and prevent condensation. Aeroflex-FO standard sheet and tube elastomeric thermal insulation are widely used to save energy and prevent condensation problem on chilled water and refrigeration systems. They also efficiently reduce heat flow on hot water plumbing, liquid heating and dual temperature piping. Manufacturer Keywords: Closed Cell Elastomeric Thermal Insulation Class-0 view less
AEROFLEX-HF Aeroflex Co.,Ltd AEROFLEX-HF is elastomeric-thermal insulation especially developed for high standard with requirement of very low halogen content and very low corrosive acid gases from combustion. AEROFLEX-HF is formulated with very low chlorine and bromine content. AER...view more AEROFLEX-HF is elastomeric-thermal insulation especially developed for high standard with requirement of very low halogen content and very low corrosive acid gases from combustion. AEROFLEX-HF is formulated with very low chlorine and bromine content. AEROFLEX-HF is used for heating and cooling piping, tank and air ducts, and to prevent stress corrosion with stainless steel pipe in the electronic control room, computer center, hospital, laboratory, ships, train and other areas where non-halogenated chemical materials required. Manufacturer Keywords: EPDM synthetic rubber thermal insulation view less
AEROFLEX-SSH Aeroflex Co.,Ltd AEROFLEX-SSH is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water piping and air duct system in HVAC&R industry. AEROFLEX-SSH is the ideal EPDM insulation with outstanding physical properties, whi...view more AEROFLEX-SSH is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water piping and air duct system in HVAC&R industry. AEROFLEX-SSH is the ideal EPDM insulation with outstanding physical properties, which has complete cross-linking closed cell structure, low density, low and stable thermal conductivity, wide continuous service temperature (-57˚C to +125˚C), low water absorption (ASTM D1056), low water vapor permeability (ASTM E96), excellent ozone and weather resistance, self-extinguishing (ASTM D635), flame proof 25/50 (ASTM E84), no corrosion on copper pipe, ozone friendly (CFC, HFC, HCFC Free), non-polar with longer service life and complies to major international quality standards. AEROFLEX-SSH provides the most available sizes from 3mm (1/8") ID to 204mm (8") ID with thickness from 3mm (1/8") to 75mm (3"). All these advantages make AEROFLEX-SSH widely recognized and installed in many high standard buildings for energy saving and prevent condensation. Moreover, the manufacturing facilities are located across the continents including USA, China, India, Germany, Switzerland, Russia and Thailand. Manufacturer Keywords: EPDM synthetic rubber thermal insulation view less
AEROFLEX/AEROCEL Aeroflex Co.,Ltd AEROFLEX/AEROCEL is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water piping and air duct system in HVAC&R industry. AEROFLEX is the ideal EPDM insulation with outstanding physical properties, whi...view more AEROFLEX/AEROCEL is EPDM based closed cell light weight elastomeric thermal insulation for chilled water, refrigerant, hot water piping and air duct system in HVAC&R industry. AEROFLEX is the ideal EPDM insulation with outstanding physical properties, which has complete cross-linking closed cell structure, low density, low and stable thermal conductivity, wide continuous service temperature (-57˚C to +125˚C), low water absorption (ASTM D1056), low water vapor permeability (ASTM E96), excellent ozone and weather resistance, self-extinguishing (ASTM D635), flame proof 25/50 (ASTM E84), no corrosion on copper pipe, ozone friendly (CFC, HFC, HCFC Free), non-polar with longer service life and complies to major international quality standards. AEROFLEX/AEROCEL provides the most available sizes from 3mm (1/8") ID to 204mm (8") ID with thickness from 3mm (1/8") to 75mm (3"). All these advantages make AEROFLEX/AEROCEL widely recognized and installed in many high standard buildings for energy saving and prevent condensation. Moreover, the manufacturing facilities are located across the continents including USA, China, India, Germany, Switzerland, Russia and Thailand. Manufacturer Keywords: EPDM synthetic rubber thermal insulation view less
AKB Manson Insulation Products Ltd. AKB is a thermal and acoustical insulation product made from inorganic, bio-soluble glass mineral wool, preformed into boards and bonded by a bio-based, thermosetting resin. It is available plain, with a factory applied FSK or an All Service Jacket (ASJ) ...view more AKB is a thermal and acoustical insulation product made from inorganic, bio-soluble glass mineral wool, preformed into boards and bonded by a bio-based, thermosetting resin. It is available plain, with a factory applied FSK or an All Service Jacket (ASJ) facing. Manufacturer Keywords: bio-soluble,bio-based,formaldehyde free,ASJ,FSK,Plain view less
AKOUSTI-LINER R® Rigid Duct Liner Manson Insulation Products Ltd. Akousti-Liner R is a heavy density Glass Mineral Wool board insulation made from inorganic bio-soluble glass fibers bonded by a formaldehyde free, bio-based, thermosetting binder. The base board is brown with a black mat facing on the airstream surface. ...view more Akousti-Liner R is a heavy density Glass Mineral Wool board insulation made from inorganic bio-soluble glass fibers bonded by a formaldehyde free, bio-based, thermosetting binder. The base board is brown with a black mat facing on the airstream surface. Manufacturer Keywords: rigid, duct, liner, formaldehyde free, bio-based, bio-soluble view less
AKOUSTI-LINER® Flexible Duct Liner Manson Insulation Products Ltd. Akousti-Liner is a Glass Mineral Wool flexible blanket; providing both thermal and acoustical insulation inside sheet metal ductwork. It is manufactured from inorganic bio-soluble glass fibers bonded by a formaldehyde free, bio-based thermosetting binder....view more Akousti-Liner is a Glass Mineral Wool flexible blanket; providing both thermal and acoustical insulation inside sheet metal ductwork. It is manufactured from inorganic bio-soluble glass fibers bonded by a formaldehyde free, bio-based thermosetting binder. The airstream surface is faced with a black mat bonded to the glass mineral wool substrate. Akousti-Liner is offered with or without factory applied edge coating to seal fibers. Manufacturer Keywords: duct, liner, formaldehyde free, bio-based binder, bio-soluble fiber view less
ALCITEK Dalsan Alci Sanayi VE Ticaret A.S ALCITEK is gypsum based, ready to use spray plaster. Single layer, it prepares the surface ready to paint. There is no need to apply finishing plaster on it. ALCITEK can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface h...view more ALCITEK is gypsum based, ready to use spray plaster. Single layer, it prepares the surface ready to paint. There is no need to apply finishing plaster on it. ALCITEK can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface hardness and brilliant appearance. ALCITEK leads to a healthy environment by regulating the moisture, due to it is a breathing material.It is a noncombustible material. Because of the water in its structure, it is a fire retarder. It does not cause mould, bacteria and fungus. Manufacturer Keywords: spray plaster, plaster, building plaster view less
ALCITEK TORO Dalsan Alci Sanayi VE Ticaret A.S ALCITEK TORO is gypsum based, ready to use spray plaster. ALCITEK TORO can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface hardness and brilliant appearance. ALCITEK TORO leads to a healthy environment by regulating the...view more ALCITEK TORO is gypsum based, ready to use spray plaster. ALCITEK TORO can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface hardness and brilliant appearance. ALCITEK TORO leads to a healthy environment by regulating the moisture, due to it is a breathing material.It is a noncombustible material. Because of the water in its structure, it is a fire retarder. It does not cause mould, bacteria and fungus. Manufacturer Keywords: spray plaster, plaster, building plaster, DALSAN, DALSAN plaster view less
ALLEY-K™ Fiberglass Pipe Insulation Manson Insulation Products Ltd. ALLEY-K™ is a preformed pipe insulation composed of high quality bio-soluble glass fibers, bonded together with a thermosetting resin. The 36” pipe sections are available with or without the all service jacket (ASJ). Our all service vapor retarder jacket ...view more ALLEY-K™ is a preformed pipe insulation composed of high quality bio-soluble glass fibers, bonded together with a thermosetting resin. The 36” pipe sections are available with or without the all service jacket (ASJ). Our all service vapor retarder jacket (ASJ) reinforced with glass fibers comes with a factory applied pressure sensitive self-sealing lap closure system (SSL). Butt strips are also supplied. Alley-K Pipe Insulation is rated for Operating Temperatures up to 850 degrees F. Manufacturer Keywords: alley, pipe, bio-soluble fiber, glass mineral wool, 850 degrees F view less
ALPHA System BASF Corporation Spray Polyurethane Foam - Roofing Elastospray 81255, FE348-2.5, Elastospray 81275, FE348-2.7, Elastospray 81285, FE348-2.8, Elastospray81305, FE348-3.0, ALPHA System, Elastospray 81325, FE348-3.2 Manufacturer Keywords: Elastospray, FE, insulation, po...view more Spray Polyurethane Foam - Roofing Elastospray 81255, FE348-2.5, Elastospray 81275, FE348-2.7, Elastospray 81285, FE348-2.8, Elastospray81305, FE348-3.0, ALPHA System, Elastospray 81325, FE348-3.2 Manufacturer Keywords: Elastospray, FE, insulation, polyurethane, foam, spray, spray polyurethane foam, roofing, energy, closed-cell, construction, commercial, residential, energy  view less
ALUAFS DRYER DUCT AFS BORU SANAYI A.S. ALUAFS DRYER DUCT non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS DRYER DUCT is produced from multi-laye...view more ALUAFS DRYER DUCT non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS DRYER DUCT is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS DRYER DUCT has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 102 mm Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal, UL 181  view less
ALUAFS HYGIENE GREEN AFS BORU SANAYI A.S. The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoo...view more The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoor air can lead to respiratory problems, infectious diseases or other allergic reactions and other various human health effects. AFS has come up with a new hygienic solution, developed with state of the art technology. It will be the major component of safe ventilation systems that protects your indoor air quality. Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, hygiene flexible air duct, anti-microbial, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal, hijyen hava kanalı view less
ALUAFS.70 FORTE GREEN AFS BORU SANAYI A.S. ALUAFS.70 FORTE GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE GREEN is produced from multi-layer alum...view more ALUAFS.70 FORTE GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 FORTE GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal  view less
ALUAFS.70 FORTE RECTANGULAR GREEN AFS BORU SANAYI A.S. ALUAFS.70 FORTE RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE RECTANGULAR GRE...view more ALUAFS.70 FORTE RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 FORTE RECTANGULAR GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 FORTE RECTANGULAR GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Wire Pitch: 18 mm (if Ø is greater than or equal to 102 mm) Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal  view less
ALUAFS.70 GREEN AFS BORU SANAYI A.S. ALUAFS.70 GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN is produced from multi-layer aluminium and po...view more ALUAFS.70 GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 800 mm Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal  view less
ALUAFS.70 GREEN UL AFS BORU SANAYI A.S. ALUAFS.70 GREEN UL non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN UL is produced from multi-la...view more ALUAFS.70 GREEN UL non-insulated UL 181 listed aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.70 GREEN UL is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 GREEN UL has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 2 ply polyester Available Diameters: 52 mm - 254 mm Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal, UL 181  view less
ALUAFS.70 RECTANGULAR GREEN AFS BORU SANAYI A.S. ALUAFS.70 RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional area at t...view more ALUAFS.70 RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional area at the minimum installation space. Airtight ALUAFS.70 RECTANGULAR GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.70 RECTANGULAR GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 2 ply polyester Temperature Range: -30 °C / +150 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ventilation, rectangular duct, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal  view less
ALUAFS.F FORTE GREEN AFS BORU SANAYI A.S. ALUAFS.F FORTE GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F FORTE GREEN is produced from multi-...view more ALUAFS.F FORTE GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F FORTE GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F FORTE GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 1 ply polyester Available Diameters: 82 mm - 800 mm Wire Pitch: 18 mm (if Ø is greater than or equal to 102 mm) Temperature Range: -30 °C / +250 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ventilation, rectangular duct, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal view less
ALUAFS.F FORTE HYGIENE GREEN AFS BORU SANAYI A.S. The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoo...view more The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoor air can lead to respiratory problems, infectious diseases or other allergic reactions and other various human health effects. AFS has come up with a new hygienic solution, developed with state of the art technology. It will be the major component of safe ventilation systems that protects your indoor air quality. Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, hygiene flexible air duct, anti-microbial, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal, hijyen hava kanalı  view less
ALUAFS.F GREEN AFS BORU SANAYI A.S. ALUAFS.F GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F GREEN is produced from multi-layer aluminium and poly...view more ALUAFS.F GREEN non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 1 ply polyester Available Diameters: 82 mm - 800 mm Temperature Range: -30 °C / +250 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal  view less
ALUAFS.F HYGIENE GREEN AFS BORU SANAYI A.S. The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoo...view more The existence of microorganisms, such as mold, mildew, and bacteria has been well documented in ventilation systems. Humid and dark ambient of ventilation systems represent suitable environment for microbial growth. The exposure through breathing of indoor air can lead to respiratory problems, infectious diseases or other allergic reactions and other various human health effects. AFS has come up with a new hygienic solution, developed with state of the art technology. It will be the major component of safe ventilation systems that protects your indoor air quality. Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, hygiene flexible air duct, anti-microbial, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal, hijyen hava kanalı view less
ALUAFS.F MARINE AFS BORU SANAYI A.S. ALUAFS.F MARINE non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F MARINE is produced from multi-layer aluminium and po...view more ALUAFS.F MARINE non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F MARINE is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F MARINE has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. Since having marine certification, it is suitable for use in marine equipments. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 1 ply polyester Available Diameters: 82 mm - 800 mm Temperature Range: -30 °C / +250 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ALU duct, ALUAFS, non-insulated duct, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izolesiz kanal view less
ALUAFS.F RECTANGULAR GREEN AFS BORU SANAYI A.S. ALUAFS.F RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional area at th...view more ALUAFS.F RECTANGULAR GREEN non-insulated aluminium rectangular flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. They provide maximum cross sectional area at the minimum installation space. Airtight ALUAFS.F RECTANGULAR GREEN is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F RECTANGULAR GREEN has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. TECHNICAL PROPERTIES Inner Duct Construction: 3 ply aluminium + 1 ply polyester Temperature Range: -30 °C / +250 °C Manufacturer Keywords: duct, flexible duct, flexible air duct, aluminium, AFS, Greenguard certified, ventilation, rectangular duct, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal  view less
AMG Flex™ Duct Quietflex Manufacturing Company The inner core is coated with Agion® Antimicrobial Technology which resists mold-fungus growth • Johns Manville Formaldehyde-Free Insulation • Effective Against a Broad Spectrum of Bacteria • Available in R–6.0 and R–8.0 • Galvanized Metal Core Reinf...view more The inner core is coated with Agion® Antimicrobial Technology which resists mold-fungus growth • Johns Manville Formaldehyde-Free Insulation • Effective Against a Broad Spectrum of Bacteria • Available in R–6.0 and R–8.0 • Galvanized Metal Core Reinforcing • Oversized Core to Fit on Collars and Register Boxes • Weather Resistant Bag Packaging Manufacturer Keywords: Flex Duct Duct Formaldehyde-Free view less
AP Armaflex Armacell, LLC AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation....view more AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) • AP Armaflex Roll is supplied in 48" wide (1.22m) continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38 and 50mm). Also available in 60" (1.53m) in 1" thickness. Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet & Roll Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords:  view less
AP Armaflex (Damman Saudi Arabia) Armacell, LLC AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is ma...view more AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords: AP Armaflex Sheet Insulation black flexible elastomeric thermal insulation smooth skin surface expanded closed-cell  view less
AP Armaflex - White Armacell, LLC Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell struc...view more Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structure of AP Armaflex W prevents moisture from wicking and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, dust free, fiber free and resists mold and mildew. Microban antimicrobial product protection provides added defense against mold on the insulation. AP Armaflex W is engineered for residential and commercial air conditioning and commercial refrigeration applications in which speed and ease of installation are of primary importance, especially in open ceiling facilities. AP Armaflex W is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +220°F (-183°C to +105°C). AP/Armaflex White meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords:  view less
AP Armaflex Fittings Armacell, LLC Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water a...view more Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water and refrigeration systems. AP Armaflex black fabricated fittings provide thermal protection (0.25 k) and condensation resistance (0.05 Water Vapor Transmission factor), with all other AP Armaflex performance advantages. 1/2", 3/4", 1", 1-1/2" and 2" wall thicknesses for 2-piece and 3-piece 90° elbows, tees and 45° elbows. 1", 1-1/2" and 2" thicknesses for grooved fittings, with couplings. Manufacturer Keywords: Armacell Fabricated Fittings prefabricated fittings Armaflex pipe insulation tubes energy efficiency controlling condensation drip chilled-water and refrigeration systems black fabricated thermal protection resistance Tees elbows WVT water Vapor Transmis  view less
AP Armaflex – Self Adhering Sheets & Rolls Armacell, LLC Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1",...view more Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (6, 10, 13, 19, 25, 38, 50mm). • Rolls are supplied in 48" (1.22m) wide continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38, 50mm). It is also available in 60" (1.53m) in 1" thicknesses. The expanded closed-cell structure of Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or CFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP Armaflex SA is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex SA Sheet Insulation is -297°F to +180°F (-183°C to +82°C). AP/Armaflex SA meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. Manufacturer Keywords:  view less
AP Armaflex – Self Seal Tubes Armacell, LLC Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-...view more Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell structure of AP Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP/Armaflex SS meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. AP Armaflex SS Pipe Insulation is used to retard heat gain and control condensation drip from chilled-water and refrigeration lines. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). Manufacturer Keywords: Mold resistant AP Armaflex Black LapSeal pipe Insulation 25/50 rated flexible elastomeric thermal insulation closed-cell structure efficient CFC HFC HCFC formaldehyde free low VOCs fiber free dust free resists mold and mildew Microban antimicrobial  view less
AP Coilflex Armacell, LLC AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agen...view more AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency for use in air ducts (EPA Reg. No. 1258-840-42182). It is added during manufacturing to provide an extra level of defense to the natural mold resistance of AP Coilflex. AP Coilflex is effective for reducing HVAC noise. It is supplied in rolls 46", 47", 48", 56-1/4", 59" and 60" wide, in 1" (or 1/2" special order) thicknesses. It can be applied with current water-based adhesives and pinning per SMACNA requirements or unpinned using Armaflex 520 Adhesives. AP Coilflex Duct Liner, like AP Armaflex Duct Liners, is ideal for air handling systems, VAV units, ducts and other air system components requiring condensation control and resistance to moisture, damage or heat gain. They also reduce noise generated by fans and air movement as well as the rattle or popping of sheet metal air ducts. Coilflex is especially effective factory-applied, including on automated coiling lines, for end use in areas like schools, hospitals, hotels, commercial and public buildings. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). Manufacturer Keywords:  view less
AP Spiralflex Armacell, LLC AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solut...view more AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solution that meets their clients’ requirements for indoor air quality (IAQ), noise attenuation, and thermal efficiency. Made from highly conformable elastomeric foam, AP Spiralflex cuts easily with a sharp knife. Its smooth and flexible backing fits snugly against the duct wall, without the typical gaps that rob conventional insulation systems of their efficiency. Installation is a simple matter of forming a correctly sized AP Spiralflex tube with one glued and taped seam, then inserting it into spiral duct sections. The end result is a more precise insulation application that weighs 20% less than dual wall ducts with fiber-glass. AP Spiralflex is made in Mebane, NC and is available in 48” wide, (nominal) 1” thick rolls. • Meets ASHRAE 90.1-2010 • Meets ASHRAE Standard 189.1 • Meets IECC 2012 • Meets California Title 24 • Meets ASTM E 84 25/50 flame and smoke rating • Made with Microban antimicrobial technology to resist the growth of mold. • GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage Manufacturer Keywords: Elastomeric foam, insulation, acoustic, IAQ, thermal, energy savings, duct, ductwork  view less
AR Series Seal Expansion Joint Systems InPro Corporation At JointMaster®, we protect building appearances by covering up the endless war between buildings and Mother Nature. Our experts engineer joint solutions so that architects don't have to worry about compromised aesthetics. Manufacturer Keywords: AR S...view more At JointMaster®, we protect building appearances by covering up the endless war between buildings and Mother Nature. Our experts engineer joint solutions so that architects don't have to worry about compromised aesthetics. Manufacturer Keywords: AR Series Seal Expansion Joint Systems  view less
ART WALL Maharam Nonwoven wallcovering Manufacturer Keywords: walls, wallpaper, nonwoven, wallcovering
ASJ Max FIBERGLAS™ Pipe Insulation Owens Corning The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistan...view more The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistance and less wicking/curling than standard ASJ. It accepts paint and mastic as well as standard ASJ. The SSL® Max closure system was designed with advanced adhesives to work specifically with the jacket to provide a tight, reliable seal that doesn’t need glue or staples. It provides an outstanding long-term bond as the acrylic adhesive “grows” on the jacket during the 48-hour wet out period. The maximum operating temperature is 1,000°F. It is available in a variety of size/thickness combinations, including select metric sizes, for use with Aquatherm® piping systems. Aquatherm® is a registered trademark of Aquatherm GmbH. Manufacturer Keywords: ASJ Max FIBERGLAS™ Pipe Insulation  view less