Success!

Successfully saved your search
AP Armaflex Armacell, LLC AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation....view more AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) • AP Armaflex Roll is supplied in 48" wide (1.22m) continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38 and 50mm). Also available in 60" (1.53m) in 1" thickness. Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet & Roll Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords:  view less
AP Armaflex (Damman Saudi Arabia) Armacell, LLC AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is ma...view more AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords: AP Armaflex Sheet Insulation black flexible elastomeric thermal insulation smooth skin surface expanded closed-cell  view less
AP Armaflex - White Armacell, LLC Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell struc...view more Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structure of AP Armaflex W prevents moisture from wicking and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, dust free, fiber free and resists mold and mildew. Microban antimicrobial product protection provides added defense against mold on the insulation. AP Armaflex W is engineered for residential and commercial air conditioning and commercial refrigeration applications in which speed and ease of installation are of primary importance, especially in open ceiling facilities. AP Armaflex W is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +220°F (-183°C to +105°C). AP/Armaflex White meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" Manufacturer Keywords:  view less
AP Armaflex Fittings Armacell, LLC Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water a...view more Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water and refrigeration systems. AP Armaflex black fabricated fittings provide thermal protection (0.25 k) and condensation resistance (0.05 Water Vapor Transmission factor), with all other AP Armaflex performance advantages. 1/2", 3/4", 1", 1-1/2" and 2" wall thicknesses for 2-piece and 3-piece 90° elbows, tees and 45° elbows. 1", 1-1/2" and 2" thicknesses for grooved fittings, with couplings. Manufacturer Keywords: Armacell Fabricated Fittings prefabricated fittings Armaflex pipe insulation tubes energy efficiency controlling condensation drip chilled-water and refrigeration systems black fabricated thermal protection resistance Tees elbows WVT water Vapor Transmis  view less
AP Armaflex – Self Adhering Sheets & Rolls Armacell, LLC Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1",...view more Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (6, 10, 13, 19, 25, 38, 50mm). • Rolls are supplied in 48" (1.22m) wide continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38, 50mm). It is also available in 60" (1.53m) in 1" thicknesses. The expanded closed-cell structure of Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or CFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP Armaflex SA is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex SA Sheet Insulation is -297°F to +180°F (-183°C to +82°C). AP/Armaflex SA meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. Manufacturer Keywords:  view less
AP Armaflex – Self Seal Tubes Armacell, LLC Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-...view more Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell structure of AP Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP/Armaflex SS meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. AP Armaflex SS Pipe Insulation is used to retard heat gain and control condensation drip from chilled-water and refrigeration lines. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). Manufacturer Keywords: Mold resistant AP Armaflex Black LapSeal pipe Insulation 25/50 rated flexible elastomeric thermal insulation closed-cell structure efficient CFC HFC HCFC formaldehyde free low VOCs fiber free dust free resists mold and mildew Microban antimicrobial  view less
AP Coilflex Armacell, LLC AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agen...view more AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency for use in air ducts (EPA Reg. No. 1258-840-42182). It is added during manufacturing to provide an extra level of defense to the natural mold resistance of AP Coilflex. AP Coilflex is effective for reducing HVAC noise. It is supplied in rolls 46", 47", 48", 56-1/4", 59" and 60" wide, in 1" (or 1/2" special order) thicknesses. It can be applied with current water-based adhesives and pinning per SMACNA requirements or unpinned using Armaflex 520 Adhesives. AP Coilflex Duct Liner, like AP Armaflex Duct Liners, is ideal for air handling systems, VAV units, ducts and other air system components requiring condensation control and resistance to moisture, damage or heat gain. They also reduce noise generated by fans and air movement as well as the rattle or popping of sheet metal air ducts. Coilflex is especially effective factory-applied, including on automated coiling lines, for end use in areas like schools, hospitals, hotels, commercial and public buildings. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). Manufacturer Keywords:  view less
AP Spiralflex Armacell, LLC AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solut...view more AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solution that meets their clients’ requirements for indoor air quality (IAQ), noise attenuation, and thermal efficiency. Made from highly conformable elastomeric foam, AP Spiralflex cuts easily with a sharp knife. Its smooth and flexible backing fits snugly against the duct wall, without the typical gaps that rob conventional insulation systems of their efficiency. Installation is a simple matter of forming a correctly sized AP Spiralflex tube with one glued and taped seam, then inserting it into spiral duct sections. The end result is a more precise insulation application that weighs 20% less than dual wall ducts with fiber-glass. AP Spiralflex is made in Mebane, NC and is available in 48” wide, (nominal) 1” thick rolls. • Meets ASHRAE 90.1-2010 • Meets ASHRAE Standard 189.1 • Meets IECC 2012 • Meets California Title 24 • Meets ASTM E 84 25/50 flame and smoke rating • Made with Microban antimicrobial technology to resist the growth of mold. • GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage Manufacturer Keywords: Elastomeric foam, insulation, acoustic, IAQ, thermal, energy savings, duct, ductwork  view less
ASJ Max FIBERGLAS™ Pipe Insulation Owens Corning The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistan...view more The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistance and less wicking/curling than standard ASJ. It accepts paint and mastic as well as standard ASJ. The SSL® Max closure system was designed with advanced adhesives to work specifically with the jacket to provide a tight, reliable seal that doesn’t need glue or staples. It provides an outstanding long-term bond as the acrylic adhesive “grows” on the jacket during the 48-hour wet out period. The maximum operating temperature is 1,000°F. It is available in a variety of size/thickness combinations, including select metric sizes, for use with Aquatherm® piping systems. Aquatherm® is a registered trademark of Aquatherm GmbH. Manufacturer Keywords: ASJ Max FIBERGLAS™ Pipe Insulation  view less
Arcticflex Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. ...view more Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products It is white in color and available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of , 1/2" and 1". Arcticflex is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B. Manufacturer Keywords: Arcticflex Whitech Arctictherm polyethylene Nomaco insulation white  view less
ArmaTuff Armacell, LLC ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant ...view more ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant flexible elastomeric thermal insulation. Its closed-cell structure prevents condensation and moisture wicking, and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is available in 36” x 48” sheets (with or without pressure sensitive adhesive) and in rolls 48” wide (without PSA), in thicknesses up to 2” ArmaTuff is designed to be used for all exterior applications: Exterior ducts, tanks, vessels, large pipes and fittings. The laminate is resistant to UV, ozone, acid rain and most industrial pollutants. No painting is required. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). Manufacturer Keywords: ArmaTuff Armaflex insulation 16 mil laminated covering membrane UV protective white silver blended polymeric top surface puncture-resistant blended polymeric base scrim reinforced core 10-year limited warranty breakdown UV radiation mold-resistant  view less
Armaflex Endura® Armacell Asia Ltd Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resili...view more Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resilience against water vapour ingress and built-in antimicrobial protection, it is the preferred choice for commercial, residential and public buildings such as hospitals, schools and elder housing. Manufacturer Keywords: Armaflex, Armaflex Endura, laminated FEF, flexible elastomeric foam, insulation, antimicrobial protection view less
Armaflex® AD0 Armacell Asia Ltd Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes ...view more Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® AD0 is the preferred choice for effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex AD0 is -50°C to +85°C for flat surface. Armaflex® AD0 is available as sheets, both continuous rolls as well as flat sheets. Manufacturer Keywords: Armaflex, Armaflex AD0, AD0, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness view less
Armaflex® AMP Armacell Asia Ltd Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses....view more Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses. With built-in antimicrobial protection, this fibre-free insulation material helps to offer better indoor air quality. Manufacturer Keywords: Armaflex, Armaflex AMP, FEF, insulation, antimicrobial protection, Armaprene view less
Armaflex® Class 0 Armacell Asia Ltd Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Hence, Armaflex® Class 0 is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® Class 0 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. Manufacturer Keywords: Armaflex, Armaflex Class 0, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness, microban view less
Armaflex® Class 0 with self-adhesive Armacell Asia Ltd Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels ...view more Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Armaflex® Class 0 with self-adhesive is a quick and easy-to-install insulation material with excellent condensation control and energy saving performance. The recommended service temperature range for Armaflex® Class 0 sheet is -50°C to +85°C. Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. Manufacturer Keywords: Armaflex, Armaflex Class 0, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness, microban, self-adhesive view less
Armaflex® Class 1 Armacell Asia Ltd Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an effic...view more Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. Armaflex® Class 1 offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® Class1 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 1 is available as sheets – continuous rolls or flat sheets as well as tubes. Manufacturer Keywords: Armaflex Class 1, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness view less
Armaflex® DS Armacell Asia Ltd Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® ...view more Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® antimicrobial additive is built into the structure of the insulation foam, and would not fade or wash away over time, providing reliable protection against mold and mildew growth. Similar to other products in the Armaflex® range, closed-cell Armaflex® DS is the ideal choice for HVAC systems due to its excellent resistance against water vapor ingress and thermal conductivity. Armaflex® DS is available as sheets – continuous rolls and flat sheets as well as tubes. Manufacturer Keywords: Armaflex DS, Class B fire performance, anti-microbial protection, condensation control, reduction in energy loss, microban view less
Armaflex® FRV Armacell Asia Ltd Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® FRV is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® FRV is -50°C to +105°C. (+85°C for flat surface). Manufacturer Keywords: Armaflex, Armaflex FRV, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness view less
Armaflex® MC Armacell Asia Ltd Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built...view more Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Armaflex® MC offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® MC is -50°C to +105°C. (+85°C for flat surface). Armaflex® MC is available as sheets – continuous rolls and flat sheets as well as tubes. Manufacturer Keywords: Armaflex MC, CFC, HFC, HCFC, formaldehyde, VOC, fiber free, mold, mildew, efficient, insulation, vapor barrier, HVAC, noise, condensation control, energy saving, temperature, sheets, rolls, thickness view less
Can Liners Grand & Toy 26 x 36 Strong, 97357 Manufacturer Keywords:
Can Liners Grand & Toy 35 x 50 Regular, 97359 Manufacturer Keywords:
Can Liners Grand & Toy 35 x 50 Regular, 97346 Manufacturer Keywords:
Can Liners Grand & Toy 26 x 36 Strong, 97351 Manufacturer Keywords:
Can Liners Grand & Toy 42 x 48 Extra Strong, 97352 Manufacturer Keywords:
Can Liners Grand & Toy 22 x 24 Regular, 97356 Manufacturer Keywords:
Can Liners Grand & Toy 35 x 50 Extra Strong, 97358 Manufacturer Keywords:
Can Liners Grand & Toy 26 x 36 Regular, 97360 Manufacturer Keywords:
Can Liners Grand & Toy 35 x 50 Strong, 97345 Manufacturer Keywords:
Can Liners Grand & Toy 22 x 24 Regular, 97347 Manufacturer Keywords:
Can Liners Grand & Toy 26 x 36 Regular, 97350 Manufacturer Keywords:
Can Liners Grand & Toy 30 x 38 Strong, 97353 Manufacturer Keywords:
CertainTeed SoftTouch Duct Wrap CertainTeed Corporation SoftTouch™ Duct Wrap Insulation is used to insulate rectangular and round heating, ventilating and airconditioning ductwork. SoftTouch Duct Wrap is a blanket-type insulation composed of tan, uniformly textured, inorganic fibrous glass formed with a for...view more SoftTouch™ Duct Wrap Insulation is used to insulate rectangular and round heating, ventilating and airconditioning ductwork. SoftTouch Duct Wrap is a blanket-type insulation composed of tan, uniformly textured, inorganic fibrous glass formed with a formaldehyde-free, plant-based binding agent. It is available unfaced or with FSK, gray PSK or white PSK vapor retarder facing. On faced products, a stapling/taping tab is provided on one edge. Manufacturer Keywords: CertainTeed Duct Wrap SoftTouch Sustainable Insulation Fiberglass  view less
Duct Wrap / Microlite® EQ Formaldehyde-free™ Johns Manville Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforc...view more Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforced vapor barrier facing. It is designed for the external insulation of HVAC ducts, and is available in a variety of different thicknesses and densities in order to meet installed performance requirements. Manufacturer Keywords: fiber glass, duct insulation, HVAC, FSK facing view less
Duct Wrap / Microlite® XG™Formaldehyde-Free Johns Manville Microlite duct wrap insulation is a light-weight, highly resilient, blanket-type thermal and acoustical insulation made of glass fibers, bonded with a white formaldehyde-free resin. Manufacturer Keywords: Duct wrap; microlite; formaldehyde; johns man...view more Microlite duct wrap insulation is a light-weight, highly resilient, blanket-type thermal and acoustical insulation made of glass fibers, bonded with a white formaldehyde-free resin. Manufacturer Keywords: Duct wrap; microlite; formaldehyde; johns manville; thermal; acoustical; insulation  view less
Duct Wrap LF R-5 Owens Corning Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for H...view more Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for HVAC systems used in hospitals Manufacturer Keywords: Duct Wrap LF R-5 from Owens Corning is available for the Latin American market.  view less
Earthwool™ 1000° Pipe Insulation with ECOSE Technology Knauf Insulation Knauf Insulation Earthwool™ 1000° Pipe Insulation is a molded, heavy-density, one-piece insulation made from inorganic glass mineral wool bonded with ECOSE® Technology. It is produced in 3’ lengths with or without a factory-applied jacket. ASJ+ is the ne...view more Knauf Insulation Earthwool™ 1000° Pipe Insulation is a molded, heavy-density, one-piece insulation made from inorganic glass mineral wool bonded with ECOSE® Technology. It is produced in 3’ lengths with or without a factory-applied jacket. ASJ+ is the newest generation all-service jacket composed of aluminum foil, reinforced with a glass scrim bonded to a kraft paper interleaving with an outer film layer leaving no paper exposed. A matching ASJ+ butt strip is furnished in the carton for each section. The jacket is white, and the longitudinal lap of the jacket has a self-sealing adhesive - SSL+. Manufacturer Keywords: Earthwool, pipe, insulation, jacket, ASJ+,Ecose view less
Earthwool™ Insulation Board and Acoustical Board with ECOSE® Technology Knauf Insulation Thermal and acoustical rigid board insulation. Available plain, with FSK facing, PSK facing or ASJ+ facing. Acoustical board may be smooth on one surface or available with a black mat facing on one surface. Manufacturer Keywords: Insulation, board, aco...view more Thermal and acoustical rigid board insulation. Available plain, with FSK facing, PSK facing or ASJ+ facing. Acoustical board may be smooth on one surface or available with a black mat facing on one surface. Manufacturer Keywords: Insulation, board, acoustical view less
Elevated Temperature Products with ECOSE® Technology Knauf Insulation Thermal and acoustical glass mineral wool insulation designed to be used in high temperature applications such as boilers, ovens and furnaces up to 1000º F. Products are available in blanket, panel or board forms. Manufacturer Keywords: ET, Board, Temp...view more Thermal and acoustical glass mineral wool insulation designed to be used in high temperature applications such as boilers, ovens and furnaces up to 1000º F. Products are available in blanket, panel or board forms. Manufacturer Keywords: ET, Board, Temperature, Elevated, 1000º F. view less
Evolution Paper-Free ASJ Owens Corning Owens Corning Pipe Insulation with Evolution™ Paper-Free ASJ will not support mold growth and is impervious to moisture, thereby helping to improve indoor air quality. The facing is cleanable, accepts mastic, can be painted for color coding and has an app...view more Owens Corning Pipe Insulation with Evolution™ Paper-Free ASJ will not support mold growth and is impervious to moisture, thereby helping to improve indoor air quality. The facing is cleanable, accepts mastic, can be painted for color coding and has an appearance that is compatible with standard ASJ. It features the SSL II® Positive Closure System, which eliminates the need to staple or tape. Key Features • Evolution™ jacket is more than 3X tougher than standard ASJ. The paper free all service jacket does not support mold growth and is designed to have compatible finished job appearance with standard ASJ. • The double adhesive lap seal and two-part butt strip seal provide effective long term vapor sealing of the longitudinal and butt joints. • SSL II® Positive Closure is fast, neat and foolproof. There is no need for staples which promotes job site productivity. • Short pieces of insulation can be cut without jacket loss and the section will not come apart in handling. There are no “dogears” in or out of the carton. Dust and moisture cannot reach the lap seal. Butt strips come in sealed bags inside the carton so they can stay clean until the moment of use. • Fiberglas™ Pipe Insulation’s low thermal conductivity contributes to lower operating costs of heating and cooling equipment. • The flame spread rating of 25 or less and smoke developed rating of 50 or less usually means that Fiberglas™ Pipe Insulation will be granted immediate building code approval.  view less
FiberglasTM Pipe Insulation with ASJ Facing Owens Corning Owens Corning™ Fiberglas™ Pipe Insulations are molded of heavy density resin bonded inorganic glass fibers. The one-piece, 36"(914mm) long, hinged sections are opened, placed over the pipe, closed and secured by means specific to the type as described bel...view more Owens Corning™ Fiberglas™ Pipe Insulations are molded of heavy density resin bonded inorganic glass fibers. The one-piece, 36"(914mm) long, hinged sections are opened, placed over the pipe, closed and secured by means specific to the type as described below. Fiberglas™ SSL II® Pipe Insulation is jacketed with a smooth, reinforced, wrinkle resistant all-service vapor retarder jacket (ASJ). • The double adhesive lap seal and two-part butt strip seal provide effective long term vapor sealing of the longitudinal and butt joints. • SSL II® Positive Closure is fast, neat and foolproof. There is no need for staples which promotes job site productivity. • Fiberglas™ Pipe Insulation’s low thermal conductivity contributes to lower operating costs of heating and cooling equipment. • The flame spread rating of 25 or less and smoke developed rating of 50 or less usually means that Fiberglas™ Pipe Insulation will be granted immediate building code approval. • Certified by Scientific Certification Systems to contain a minimum of 57% recycled glass content Manufacturer Keywords: Pipe, Insulation, SSL II, SSL 2, ASTM C 547, Fiberglas, ASJ  view less
FlexTherm Nomaco Insulation FlexTherm flexible elastomeric tube insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm an efficient insulator and effective moisture vapor reta...view more FlexTherm flexible elastomeric tube insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm an efficient insulator and effective moisture vapor retarder. FlexTherm is available in wall thicknesses of 3/8" through 1-1/2". FlexTherm key physical properties are approved by Factory Mutual Corporation. FlexTherm is non-porous, non-fibrous and resists mold growth. Manufacturer Keywords: elastomeric closed cell flexible pipe insulation tubes FlexTherm  view less
FlexTherm Self Seal Nomaco Insulation FlexTherm Self Seal flexible elastomeric tube insulation is pre-slit with a factory applied pressure sensitive adhesive. It is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell struc...view more FlexTherm Self Seal flexible elastomeric tube insulation is pre-slit with a factory applied pressure sensitive adhesive. It is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Self Seal an efficient insulator and effective moisture vapor retarder. FlexTherm Self Seal tube is available in wall thicknesses of 1/2" and 1". FlexTherm Self Seal key physical properties are approved by Factory Mutual Corporation. FlexTherm Self Seal is non-porous, non-fibrous and resists mold growth. Manufacturer Keywords: elastomeric closed cell flexible pipe insulation tubes FlexTherm  view less
FlexTherm Sheet Nomaco Insulation FlexTherm Sheet flexible elastomeric insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Sheet an efficient insulator and effective moisture vap...view more FlexTherm Sheet flexible elastomeric insulation is used to retard heat gain and prevent condensation in applications ranging from -297° F to 220° F. The expanded closed cell structure makes FlexTherm Sheet an efficient insulator and effective moisture vapor retarder. FlexTherm Sheet is available in wall thicknesses of 1/2" through 2". It is supplied as flat sheets or rolls. FlexTherm Sheet key physical properties are approved by Factory Mutual Corporation. FlexTherm Sheet is non-porous, non-fibrous and resists mold growth. Manufacturer Keywords: elastomeric closed cell flexible pipe insulation tubes FlexTherm  view less
Flexible Duct Insulation / Flex-Glas® EQ Johns Manville Flex-Glas® EQ Formaldehyde-free™ Flexible Duct Insulation is a brown, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with a bio-based binder. Flex-Glas® EQ is designed for use in the manufacture of insulated...view more Flex-Glas® EQ Formaldehyde-free™ Flexible Duct Insulation is a brown, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with a bio-based binder. Flex-Glas® EQ is designed for use in the manufacture of insulated ducts for HVAC air handling systems and designed to meet the installed thermal requirements of local, state, and national energy codes for air duct systems. It reduces noise from air movement and mechanical equipment and is available in rolls slit to widths from 15” to 93” and thicknesses of 1-1/4” to 2-1/2”. Manufacturer Keywords: fiber glass, insulation, flexible duct insulation, HVAC  view less
Flexible Duct Insulation / Flex-Glas® PC Johns Manville Flex-Glas® PC Flexible Duct Blanket is a white, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with an acrylic resin. Flex-Glas® PC is designed for use in the manufacture of insulated ducts for HVAC air hand...view more Flex-Glas® PC Flexible Duct Blanket is a white, lightweight, formaldehyde-free thermal and acoustical insulation made from glass fibers bonded with an acrylic resin. Flex-Glas® PC is designed for use in the manufacture of insulated ducts for HVAC air handling systems and designed to meet the installed thermal requirements of local, state, and national energy codes for air duct systems. It reduces noise from air movement and mechanical equipment and is available in rolls slit to widths from 15” to 93” and thicknesses of 1-1/4” to 2-1/2”. Manufacturer Keywords: flexible; formaldehyde-free; thermal; acoustic; insulation; blanket  view less
GEM™ Insulation Fiber Glass Insulation for Industrial Applications Owens Corning Owens Corning GEM insulation is designed for high temperature commercial and industrial applications. The product is an excellent choice for applications where a high density blanket with excellent flexibility and dimensional stability is required. The pr...view more Owens Corning GEM insulation is designed for high temperature commercial and industrial applications. The product is an excellent choice for applications where a high density blanket with excellent flexibility and dimensional stability is required. The product is thin, has outstanding dimensional stability, excellent thermal performance, low smoke and odor, and is easy to handle and install. The flexible, white, mechanically entangled fiber glass blankets are bonded with a proprietary thermoset binder. • GEM insulation’s tensile strength and thickness allow for design flexibility and ease of handling and installation • Helps absorb equipment noise, providing acoustical benefits • Helps provide optimal thermal performance when compared to competitive materials. • Operates in environments from subzero to 1000ºF. Manufacturer Keywords: Insulation, high temperature insulation, high temperature, laboratory spaces, blanket,  view less
Imcolock Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems. Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. ...view more Flexible, closed cell polyolefin insulation for piping systems. Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products It is black in color and available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of 3/8", 1/2", 3/4" and 1" IMCOLOCK is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B.0B. Manufacturer Keywords: Imcoa Arctictherm closed cell flexible pipe insulation tubes  view less
Imcosheet Nomaco Insulation IMCOA® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8 thru 2-1/2". Standard roll width is 48" available in the same thickn...view more IMCOA® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8 thru 2-1/2". Standard roll width is 48" available in the same thickness. Manufacturer Keywords: closed cell flexible pipe insulation tubes Imcoa polyethylene  view less
Insul-Lock® Seam-Seal Pipe K-Flex USA, LLC Insul-Lock® insulation products and accessories are widely recognized by the HVACR and Plumbing wholesale trade. They offer superior product characteristics such as cold weather flexibility, durable skin surface and exacting manufacturing tolerances. F...view more Insul-Lock® insulation products and accessories are widely recognized by the HVACR and Plumbing wholesale trade. They offer superior product characteristics such as cold weather flexibility, durable skin surface and exacting manufacturing tolerances. Features and Benefits include: Moisture Vapor Resistance, 3 Ft and 6 Ft sizes arevavailable for different application installations, white color available for interior systems, Seam Seal Pressure Sensitive Adhesive (PSA) for quick and easy installation with no mess, and ability to withstand temperature ranges of -70°F to 200°F (-57°C to 93°C) and Mold and mildew resistant. Insul-Lock® key physical properties are approved through supervision by Factory Mutual Research Corporation. Insul-Lock® is non-porous, non-fibrous and resists mold growth. Manufacturer Keywords: Elastomeric Seam Seal Pressure Sensitive Adhesive (PSA) for quick and easy installation with no mess, and ability to withstand temperature ranges of -70°F to 200°F (-57°C to 93°C) and Mold and mildew resistant. Insul-Lock® key physical properties ar  view less
Insul-Sheet® S2S K-Flex USA, LLC Insul-Sheet® S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell struct...view more Insul-Sheet® S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. Insul-Sheet® S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: elastomeric closed cell flexible sheet insulation tubes  view less
Insul-Tube® 6-foot (unslit) K-Flex Malaysia Sdn Bhd. Insul-Tube® 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of Insul-Tube® 6-foot (unslit) create an exceptional insulation, protect against mo...view more Insul-Tube® 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of Insul-Tube® 6-foot (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. Insul-Tube® 6-foot (unslit) is primarily used in the HVAC/R market and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” inside diameter in 3/8” to 1-1/2” wall thicknesses. Insul-Tube® products are non-porous and non-fibrous and resist mold, fungal and bacterial growth. For added protection, all Insul-Tube® products are protected with an antimicrobial agent. Manufacturer Keywords: elastomeric closed cell flexible pipe insulation tubes  view less
Insul-Tube® White 6-foot K-Flex USA, LLC Insul-Tube® White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of Insul-Tube® White 6-foot prevent frost formation on cold lines and heat loss on hot wat...view more Insul-Tube® White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of Insul-Tube® White 6-foot prevent frost formation on cold lines and heat loss on hot water plumbing and solar application. This product provides superior performance in the -297°F to 220°F temperature range. Insul-Tube® White 6-foot is primarily used in the HVAC/R market and in areas where a more hygienic appearance is required. It comes in 6’ lengths in a variety of sizes from 3/8” to 4-1/8” inside diameter in specific wall thicknesses. Manufacturer Keywords: elastomeric closed cell flexible pipe insulation tubes  view less
K Flex Clad™ AL K-Flex USA, LLC K-Flex Clad™ AL is an elastomeric tube insulation with an aluminum-finish clad covering that protects the insulation from damage, such as UV rays, mechanical abuse, moisture, chemicals and mold growth. This product is ideal for outdoor applications. K-...view more K-Flex Clad™ AL is an elastomeric tube insulation with an aluminum-finish clad covering that protects the insulation from damage, such as UV rays, mechanical abuse, moisture, chemicals and mold growth. This product is ideal for outdoor applications. K-Flex Clad™ AL is easy to install and comes equipped with a dual closure system: self seal adhesive strips on the longitudinal seam and an overlap jacket closure system. Use of K-Flex® Rivets are strongly recommended. Manufacturer Keywords: wide temperature range of -297F to +220F including hot water, chilled water and refrigeration systems elastomeric tube insulation with an aluminum-finish clad covering that protects the insulation from damage, such as UV rays, mechanical abuse, moistur  view less
K-Fit™ Elastomeric 45° Elbows K-Flex USA, LLC K-Fit™ Elastomeric 45° Elbows are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings are used for insulation of 45° ...view more K-Fit™ Elastomeric 45° Elbows are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings are used for insulation of 45° pipe bends and can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Elastomeric 45° Elbows are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. For more information, please consult our technical data sheet. Manufacturer Keywords: black, white and ECO elastomeric products 45 degree elbows installed in seconds affordable superior fit  view less
K-Fit™ Elastomeric 90° Elbows K-Flex USA, LLC K-Fit™ Elastomeric 90° Elbows are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings are used for insulating 90°...view more K-Fit™ Elastomeric 90° Elbows are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings are used for insulating 90° pipe bends and can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Elastomeric 90° Elbows are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. Manufacturer Keywords: pre-fabricated fittings superior fit affordable price black, white and ECO elastomeric products  view less
K-Fit™ Elastomeric Tees K-Flex USA, LLC K-Fit™ Elastomeric Tees are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings can be adhered to tube insulation for...view more K-Fit™ Elastomeric Tees are available in black, white and ECO elastomeric products. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. These fittings can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Elastomeric Tees are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. Manufacturer Keywords: pre-fabricated fittings black, white and ECO elastomeric products tees fast installation good fit  view less
K-Fit™ Grooved Couplings K-Flex USA, LLC K-Fit™ Grooved Couplings are specially designed to fit around clamps and pipe connections and available in black, white and ECO elastomeric material. These grooved covers are designed to securely wrap around pipe clamps and connections. These pre-fabr...view more K-Fit™ Grooved Couplings are specially designed to fit around clamps and pipe connections and available in black, white and ECO elastomeric material. These grooved covers are designed to securely wrap around pipe clamps and connections. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. K-Fit™ Grooved Couplings can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Grooved Couplings are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. Manufacturer Keywords: pipe clamp and connections elastomeric insulation  view less
K-Fit™ Grooved Elbows K-Flex USA, LLC K-Fit™ Grooved Elbows are specially designed to fit around couplings and pipe connections and available in black, white and ECO elastomeric products. These grooved elbows are similar in design to our K-Fit™ Elastomeric 90° Elbows. These pre-fabricated...view more K-Fit™ Grooved Elbows are specially designed to fit around couplings and pipe connections and available in black, white and ECO elastomeric products. These grooved elbows are similar in design to our K-Fit™ Elastomeric 90° Elbows. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. K-Fit™ Grooved Elbows can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Grooved Elbows are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. Manufacturer Keywords: pipe clamp coverings elastomeric insulation grooved 90 degree elbows mold and mildew resistant  view less
K-Fit™ Grooved Tees K-Flex USA, LLC K-Fit™ Grooved Tees are specially designed to fit around couplings and pipe connections and are available in black, white and ECO elastomeric products. These grooved elbows are similar in design to our K-Fit™ Elastomeric Tees. These pre-fabricated fitting...view more K-Fit™ Grooved Tees are specially designed to fit around couplings and pipe connections and are available in black, white and ECO elastomeric products. These grooved elbows are similar in design to our K-Fit™ Elastomeric Tees. These pre-fabricated fittings can be installed in seconds and provide a superior fit and value at an affordable price. K-Fit™ Grooved Tees can be adhered to tube insulation for a water-tight seal and excellent thermal properties. All of our K-Fit™ Grooved Tees are fabricated in a factory setting that eliminates the risk of environmental factors that could affect the performance of the product. Manufacturer Keywords: grooved tees elastomeric insulation coupling and pipe connections wraps  view less
K-Flex Clad™ WT K-Flex USA, LLC K-Flex Clad™ WT combines our flexible elastomeric tube insulation with an attractive white-finish clad covering that is moisture and abuse-resistant, low VOC and mold resistant. This white finish is perfect for indoor applications where piping systems ...view more K-Flex Clad™ WT combines our flexible elastomeric tube insulation with an attractive white-finish clad covering that is moisture and abuse-resistant, low VOC and mold resistant. This white finish is perfect for indoor applications where piping systems are exposed and cleanability and appearance are imperative. The clad jacketing meets the 25/50 flame spread / smoke development standard when tested according to ASTM E 84 and will not dent or wrinkle when exposed to mechanical abuse. This product is ideal for indoor applications because it is easy to clean. The product can also be painted to blend in with any color needed. K-Flex Clad™ WT is easy to install and comes equipped with a dual closure system: self seal adhesive strips* on the longitudinal seam and an overlap jacket closure system. *Use of K-Flex® Rivets are strongly recommended. Manufacturer Keywords: K-Flex Clad™ WT combines our flexible elastomeric tube insulation with an attractive white-finish clad covering that is moisture and abuse-resistant, low VOC and mold resistant. This white finish is perfect for indoor applications where piping systems  view less
K-Flex ® ST Sheet S2S K-FLEX GULF MANUFACTURING LLC, DUBAI K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structu...view more K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. K-Flex ® ST S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: K-FLEX Elastomeric Closed Cell flexible pipe insulation tubes  view less
K-Flex ® ST Sheet S2S K-Flex Malaysia Sdn Bhd. K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structu...view more K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. K-Flex ® ST S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: K-FLEX Elastomeric Closed Cell flexible pipe insulation tubes  view less
K-Flex ® ST Sheet S2S K-Flex USA, LLC K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structu...view more K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. K-Flex ® ST S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: K-FLEX Elastomeric Closed Cell flexible pipe insulation tubes  view less
K-Flex ® ST Sheet S2S L'ISOLANTE K-FLEX, ITALY K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structu...view more K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. K-Flex ® ST S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: K-FLEX Elastomeric Closed Cell flexible pipe insulation tubes  view less
K-Flex ® ST Sheet S2S L’isolante K-Flex( Suzhou) Co. Ltd. K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structu...view more K-Flex ® ST S2S is black, elastomeric sheet insulation with protective skin on both sides of the sheet. Easy to clean and functional, the double-sided skin product provides a better surface to resist moisture and dirt and maintains the closed cell structure of the elastomeric foam better than a cut open cell surface. As an added benefit – the double-sided skin can be used with either side facing away from the applied surface, resulting in less waste if one side becomes damaged. K-Flex ® ST S2S provides excellent resistance to condensation and frost formulation and prevents heat gain when used on cold equipment, tanks, vessels, ducts and large O.D. pipes. This product comes in flat sheets (36” x 48” thickness) and rolls. It is recommended for applications ranging from -297°F to 200 - 220°F*. Manufacturer Keywords: K-FLEX Elastomeric Closed Cell flexible pipe insulation tubes  view less
K-Flex® LS Tube 2m (unslit) K-FLEX GULF MANUFACTURING LLC, DUBAI K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes  view less
K-Flex® LS Tube 2m (unslit) L'ISOLANTE K-FLEX, ITALY K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes  view less
K-Flex® LS Tube 2m (unslit) L’isolante K-Flex( Suzhou) Co. Ltd. K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes  view less
K-Flex® LS Tube 2meter (unslit) K-Flex Malaysia Sdn Bhd. K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® LS 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes  view less
K-Flex® LS Tube 6-foot (unslit) K-Flex USA, LLC K-Flex® LS 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 6-foot (unslit) create an exceptional insulation, protect against mois...view more K-Flex® LS 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 6-foot (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 6-foot (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes  view less
K-Flex® LS Tube Seam-Seal -2 meter K-Flex USA, LLC K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration a...view more K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes self adhering adhesive  view less
K-Flex® LS Tube Seam-Seal 2 meter K-Flex Malaysia Sdn Bhd. K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration a...view more K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes self adhering adhesive  view less
K-Flex® LS Tube Seam-Seal 2m K-FLEX GULF MANUFACTURING LLC, DUBAI K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration a...view more K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS 2m products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes self adhering adhesive  view less
K-Flex® LS Tube Seam-Seal 2m L'ISOLANTE K-FLEX, ITALY K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration a...view more K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes self adhering adhesive  view less
K-Flex® LS Tube Seam-Seal 2m L’isolante K-Flex( Suzhou) Co. Ltd. K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration a...view more K-Flex® LS 2meter is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® LS 2meter create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® LS 2meter is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® LS products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® LS products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes self adhering adhesive  view less
K-Flex® LS Tube White 6-foot K-Flex USA, LLC K-Flex® LS Tube White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of K-Flex® LS Tube White 6-foot prevent frost formation on cold lines and heat loss on...view more K-Flex® LS Tube White 6-foot is designed for exposed piping areas or areas that require painting such as supermarkets, hospitals and schools. The closed cell properties of K-Flex® LS Tube White 6-foot prevent frost formation on cold lines and heat loss on hot water plumbing . This product provides superior performance in the -297°F to 220°F temperature range. K-Flex® LS Tube White 6-foot is primarily used by the professional contractor and in areas where a more hygienic appearance is required. It comes in 6’ lengths in a variety of sizes from 3/8” to 4-1/8” inside diameter in specific wall thicknesses. Manufacturer Keywords: K-Flex elastomeric closed cell flexible pipe insulation tubes white interior pipe systems  view less
K-Flex® ST Tube 2m (unslit) K-FLEX GULF MANUFACTURING LLC, DUBAI K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® ST 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® ST products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® ST products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex Elastomeric Closed Cell flexible Pipe Insulation tubes  view less
K-Flex® ST Tube 2m (unslit) K-Flex Malaysia Sdn Bhd. K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® ST 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® ST products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® ST products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex Elastomeric Closed Cell flexible Pipe Insulation tubes  view less
K-Flex® ST Tube 2m (unslit) L'ISOLANTE K-FLEX, ITALY K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® ST 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® ST products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® ST products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex Elastomeric Closed Cell flexible Pipe Insulation tubes  view less
K-Flex® ST Tube 2m (unslit) L’isolante K-Flex( Suzhou) Co. Ltd. K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against mois...view more K-Flex® ST 2meter (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 2meter (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® ST 2meter (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® ST products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® ST products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex Elastomeric Closed Cell flexible Pipe Insulation tubes  view less
K-Flex® ST Tube 6 foot (unslit) K-Flex USA, LLC K-Flex® ST 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 6-foot (unslit) create an exceptional insulation, protect against mois...view more K-Flex® ST 6-foot (unslit) is a black, flexible elastomeric foam tube used to retard heat gain and prevent condensation on piping applications. The closed cell properties of K-Flex® ST 6-foot (unslit) create an exceptional insulation, protect against moisture penetration and provide the best solution for applications within a -297°F to 220°F temperature range. K-Flex® ST 6-foot (unslit) is primarily used by professional contractors and comes in 6’ lengths in a variety of sizes from 3/8” to 8-5/8” ID and in 3/8” to 1-1/2” wall thicknesses. K-Flex® ST products are non-porous and non-fibrous and resists mold, fungal and bacterial growth. For added protection, all K-Flex® ST products are protected with an antimicrobial agent. Manufacturer Keywords: K-Flex Elastomeric Closed Cell flexible Pipe Insulation tubes  view less
Liners; Packaging Bags Alte-Rego Corporation various Manufacturer Keywords:
Marine Duct Wrap CertainTeed Corporation Marine Duct Wrap Insulation is used to insulate rectangular and round HVAC ductwork for marine and general applications. It reduces unwanted heat loss or gain from equipment and ductwork and, when properly installed in the correct thickness, virtually eli...view more Marine Duct Wrap Insulation is used to insulate rectangular and round HVAC ductwork for marine and general applications. It reduces unwanted heat loss or gain from equipment and ductwork and, when properly installed in the correct thickness, virtually eliminates condensation problems on cold duct surfaces. Manufacturer Keywords: marine, duct, wrap, sustainable, insulation, certainteed  view less
Mechanical Pipe Insulation / Micro-Lok® HP Ultra Johns Manville Micro-Lok HP Ultra Fiber Glass Pipe Insulation is a high performance insulation made from rotary glass fibers (Micro-Lok fibers are made using a pot and marble process) bonded with a thermo-setting resin, which contains 35% post consumer recycled content ...view more Micro-Lok HP Ultra Fiber Glass Pipe Insulation is a high performance insulation made from rotary glass fibers (Micro-Lok fibers are made using a pot and marble process) bonded with a thermo-setting resin, which contains 35% post consumer recycled content (10% for Micro-Lok). Micro-Lok HP Ultra Micro-Lok is used to insulate standard iron pipe and copper tubing. The 3-foot (0.92m) sections are covered with a factory-applied poly vapor-barrier jacket. Manufacturer Keywords: pipe insulation, fiber glass, recycled, hot pipe, cold pipe, concealed pipe, exposed pipe, ASTM C 411 view less
Mechanical Pipe Insulation / Zeston® Hi-Lo® Temp Formaldehyde-Free™ Insert Johns Manville Zeston® Hi-Lo® Temp Formaldehyde-Free™ fiber glass insulation inserts are flexible, pre-cut inserts for PVC fittings. They are sized for each specific PVC fitting and are a lower-cost alternative to preformed or fabricated insulated elbows. The inserts ar...view more Zeston® Hi-Lo® Temp Formaldehyde-Free™ fiber glass insulation inserts are flexible, pre-cut inserts for PVC fittings. They are sized for each specific PVC fitting and are a lower-cost alternative to preformed or fabricated insulated elbows. The inserts are designed to meet the specs required by ASTM C547 and ASHRAE 90. Manufacturer Keywords: fiber glass, insulation insert, Zeston, PVC fitting  view less
Micro-Flex® Johns Manville Johns Manville Micro-Flex® is a large diameter pipe and tank wrap that provides an alternative solution to pre-formed insulation. Our manufacturing process yields a fiber orientation that enhances both the compressive strength and thermal performance of t...view more Johns Manville Micro-Flex® is a large diameter pipe and tank wrap that provides an alternative solution to pre-formed insulation. Our manufacturing process yields a fiber orientation that enhances both the compressive strength and thermal performance of the final product when compared to conventional pipe and tank insulation. Micro-Flex rolls can be cut to size on-the-job and are available with FSK or AP vapor retarder facing. It provides a single solution to a variety of field applications for the contractor and distributer. Manufacturer Keywords: pipe wrap, tank wrap, compressive strength view less
Micro-Lok® HP plain Johns Manville Johns Manville Micro-Lok® HP plain fiber glass pipe insulation is manufactured using the latest technology and our unique in-line manufacturing process and is available without a vapor retarder. Our in-line manufacturing process results in a uniform fiber...view more Johns Manville Micro-Lok® HP plain fiber glass pipe insulation is manufactured using the latest technology and our unique in-line manufacturing process and is available without a vapor retarder. Our in-line manufacturing process results in a uniform fiber glass core that delivers consistent performance during fabrication and installation. Micro-Lok HP delivers thermal performance you can count on, while meeting all industry performance requirements. This assures the building owner, mechanical engineer and contractor that Micro-Lok HP will deliver the performance you’ve come to expect from JM products throughout the life of the mechanical system. Manufacturer Keywords: pipe insulation, fiberglass pipe insulation view less
NH Armaflex Armacell, LLC NH Armaflex is a nonhalogen flexible elastomeric thermal insulation, gray in color, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (special order) in sizes from 3/8" through 8" IPS. Sheets are supplied 36" x 48" in nominal wal...view more NH Armaflex is a nonhalogen flexible elastomeric thermal insulation, gray in color, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (special order) in sizes from 3/8" through 8" IPS. Sheets are supplied 36" x 48" in nominal wall thicknesses of 1/2", 3/4", 1" and 1-1/2" (special order). NH Armaflex was specially developed by Armacell to meet EB 4013 and minimize the density of smoke and eliminate corrosive acid gases from combustion. NH Armaflex will not carry a progressive flame, and is formulated without chlorine, bromines, or PVC. A closed-cell material, NH Armaflex provides low thermal conductivity, good fire behavior, low-temperature flexibility, and excellent protection against water vapor diffusion. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. When installed in the same manner as standard AP Armaflex flexible insulation, NH Armaflex requires no additional vapor retarder under normal conditions. NH Armaflex is used as insulation and protection for piping, tanks, and air ducts, and to prevent stress corrosion with stainless steel pipes in the following applications: • US Navy applications • General shipbuilding • IMO (International Maritime Organization) • nuclear power plants • other areas where nonhalogenated or chlorine-free materials may be required.  view less
Nomalock Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive a...view more Flexible, closed cell polyolefin insulation for piping systems. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products - Available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of 3/8", 1/2", 3/4" and 1" WHITECH • Supplied in white - same features as NOMALOCK process. NOMALOCK is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B. Manufacturer Keywords: Nomalock polyethylene closed cell flexible pipe insulation tubes  view less
Nomaply Nomaco Insulation NOMACO® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black or white in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8” thru 2-1/2”. Standard roll width is 48" available in the ...view more NOMACO® Sheet Insulation is a flexible, polyethylene, thermal insulation. It is black or white in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8” thru 2-1/2”. Standard roll width is 48" available in the same thickness. Manufacturer Keywords: Nomaply polyethylene closed cell flexible pipe insulation tubes  view less
OEM / DuraCore® Johns Manville DuraCore Fiber Glass Insulation is a lightweight, highly resilient, blanket-type insulation made from borosilicate glass fibers. The insulation blanket is fiber glass bonded with a thermosetting phenolic resin and is designed to provide this product with ...view more DuraCore Fiber Glass Insulation is a lightweight, highly resilient, blanket-type insulation made from borosilicate glass fibers. The insulation blanket is fiber glass bonded with a thermosetting phenolic resin and is designed to provide this product with excellent core strength. DuraCore is an excellent choice for HVAC equipment applications because it provides high acoustical values in the high and low frequency ranges normally encountered in HVAC equipment. Manufacturer Keywords: Acoustical Efficiency Thermal Efficiency Resilient  view less
OEM / Microlite® Thermal Insulation Johns Manville Microlite is a lightweight, highly resilient, blanket-type thermal and acoustical insulation made of flame attenuated glass fibers bonded with a thermosetting resin. The borosilicate glass fibers are incombustible, non-hygroscopic, and do not support fung...view more Microlite is a lightweight, highly resilient, blanket-type thermal and acoustical insulation made of flame attenuated glass fibers bonded with a thermosetting resin. The borosilicate glass fibers are incombustible, non-hygroscopic, and do not support fungi or vermin. It is unaffected by oil, grease, and most acids. Microlite is ideal for a variety of appliance, equipment, and office furniture applications that require high thermal and acoustical efficiency in a minimal space. Manufacturer Keywords: Lightweight Resilient Fiber Glass Thermal Efficiency Acoustical Efficiency Incombustible Non-hygroscopic  view less
OEM / Micromat® HVAC Equipment Liner Johns Manville Micromat is a flexible, resilient, blanket-type fiber glass insulation faced on one side with a smooth, durable, non-woven mat. It is recommended specifically for use as a thermal and acoustical control liner in HVAC equipment. It is also suited for other...view more Micromat is a flexible, resilient, blanket-type fiber glass insulation faced on one side with a smooth, durable, non-woven mat. It is recommended specifically for use as a thermal and acoustical control liner in HVAC equipment. It is also suited for other equipment applications requiring effective thermal and acoustical control, low air friction, damage resistance, and attractive appearance. Manufacturer Keywords: HVAC Equipment Insulation view less
OEM / Tuf-Glas® / Valuelite® HVAC Equipment Liner Johns Manville Tuf-Glas™ Fiber Glass Insulation is a lightweight, highly resilient, blanket-type insulation made from borosilicate glass fibers bonded with a thermosetting resin. Tuf-Glas is designed to provide a rotary product with good core strength. Tuf-Glas can be u...view more Tuf-Glas™ Fiber Glass Insulation is a lightweight, highly resilient, blanket-type insulation made from borosilicate glass fibers bonded with a thermosetting resin. Tuf-Glas is designed to provide a rotary product with good core strength. Tuf-Glas can be used in a variety of applications that require good thermal and acoustical efficiency in a minimal space. Manufacturer Keywords: Tuf-Glas, HVAC, Equipment Liner  view less
OEM / Tuf-Skin® Johns Manville Tuf-Skin I is a dual-density fiber glass blanket used for HVAC equipment applications. With a combination of a high-density skin and low-density core, this construction enhances sound absorption at both high and low frequencies. Tuf-Skin I provides effect...view more Tuf-Skin I is a dual-density fiber glass blanket used for HVAC equipment applications. With a combination of a high-density skin and low-density core, this construction enhances sound absorption at both high and low frequencies. Tuf-Skin I provides effective thermal and acoustical control in air conditioning, heating equipment, appliances, and other equipment applications. Recommended operating temperatures are up to 250° F (121° C). Inherent rigidity eases installation and readily withstands damage from mechanical abrasion during assembly and from air erosion in service. Tuf-Skin I cuts easily with a knife, steel rule die, or shears and can be firmly bonded to metals, plastic, or other materials with commercial adhesives or mechanical fastening devices. Manufacturer Keywords: HVAC Equipment Insulation  view less
OEM / Tuf-Skin® II Johns Manville For acoustical and thermal applications in HVAC equipment and appliances, Tuf-Skin II is the cost-effective alternative to the original Johns Manville Tuf-Skin I. With a combination of a high-density skin and low-density core, this construction enhances s...view more For acoustical and thermal applications in HVAC equipment and appliances, Tuf-Skin II is the cost-effective alternative to the original Johns Manville Tuf-Skin I. With a combination of a high-density skin and low-density core, this construction enhances sound absorption at both high and low frequencies. Tuf-Skin II provides effective thermal and acoustical control in air conditioning, heating equipment, appliances, and other equipment applications. Recommended operating temperatures are up to 250° F (121° C). Inherent rigidity eases installation and readily withstands damage from mechanical abrasion during assembly and from air erosion in service. Tuf-Skin II cuts easily with a knife, steel rule die, or shears and can be firmly bonded to metals, plastic, or other materials with commercial adhesives or mechanical fastening devices. Manufacturer Keywords: HVAC Equipment Insulation  view less
OEM / Valulite® Johns Manville Valulite Fiber Glass Insulation is a lightweight, highly resilient blanket-type thermal and acoustical insulation made from borosilicate glass fibers, bonded with a thermosetting resin. It is designed specifically to meet requirements of the HVAC equipmen...view more Valulite Fiber Glass Insulation is a lightweight, highly resilient blanket-type thermal and acoustical insulation made from borosilicate glass fibers, bonded with a thermosetting resin. It is designed specifically to meet requirements of the HVAC equipment industry and other OEM applications. Through control of fiber diameter and product density, Valulite is available in two levels of thermal conductivity: Valulite-24 (k=0.24), and Valulite-25 (k=0.25). Both provide excellent acoustical performance. The glass fibers that make up Valulite insulation are incombustible and non-hygroscopic. It does not support fungi or vermin and is unaffected by oil, grease, and most acids. Inherent high tensile strength improves resistance to damage during lamination and installation. Manufacturer Keywords: HVAC Equipment Insulation  view less
RA Series EcoTouch® Insulation Owens Corning EcoTouch® Insulation products are lightweight blankets. These products are designed to provide superior dimensional stability, excellent thermal and acoustical performance, and easy handling and installation. • The RA product line offers a wide range o...view more EcoTouch® Insulation products are lightweight blankets. These products are designed to provide superior dimensional stability, excellent thermal and acoustical performance, and easy handling and installation. • The RA product line offers a wide range of thermal, acoustical, and mechanical performance levels and densities to provide cost efficient performance in many varied applications. These products are available in both roll and batt form. Dimensional Stability RA products have excellent resilience and compressive strengths. • RA is non-corrosive, and will not accelerate corrosion on copper, aluminum, or steel. • The RA series of products offer documented and proven acoustical performance for a wide range of applications. Manufacturer Keywords: Insulation, blanket, acoustic  view less
SLEEVEAFS GREEN AFS BORU SANAYI A.S. SLEEVEAFS GREEN air duct insulation sleeves are ready to use insulation elements which are specifically produced for circular and/or oval air duct insulation. Airtight SLEEVEAFS GREEN is produced from glass wool and covered with jacket. The outer jack...view more SLEEVEAFS GREEN air duct insulation sleeves are ready to use insulation elements which are specifically produced for circular and/or oval air duct insulation. Airtight SLEEVEAFS GREEN is produced from glass wool and covered with jacket. The outer jacket protects glass wool insulation part and also serves as a vapour barrier. SLEEVEAFS GREEN is fast and easy to install. Jacket Construction: 1 ply aluminium + 2 ply polyester Available Diameters (according to inner duct): Ø 52 mm – Ø 800 mm Temperature Range: -30 °C / +150 °C Insulation: Glass Wool Manufacturer Keywords: duct sleeve, duct, flexible duct, flexible air duct, aluminium, AFS, insulated duct, Greenguard certified, air duct insulation sleeve, ventilation, flexible hava kanalı, esnek hava kanalı, aluminyum esnek kanal, izoleli kanal, hazır hava kanalı izolasyonu  view less