Success!

Successfully saved your search
7.2 Rib IMETCO Exposed Fastener Metal Wall Panel
Aboweld 55-1 Abatron Thick, structural, non-slumping epoxy compound for concrete, stone, masonry, and other rigid substrates. It's ideal for wall, steps, over-hangs, and other vertical surfaces; the product will not sag, so no forms are require. 55-1 is shrink free, 100% soli...view more Thick, structural, non-slumping epoxy compound for concrete, stone, masonry, and other rigid substrates. It's ideal for wall, steps, over-hangs, and other vertical surfaces; the product will not sag, so no forms are require. 55-1 is shrink free, 100% solids, virtually odorless, and waterproof. view less
accel-E™ Steel Thermal Efficient Panel SYNTHEON Inc. The accel-E™ Steel Thermal Efficient Panel (S.T.E.P.) from ACCELERATED Building Technologies is a thermally resistant, high performance building panel that’s strong, light in weight and energy efficient. Combining the strength and performance of cold-fo...view more The accel-E™ Steel Thermal Efficient Panel (S.T.E.P.) from ACCELERATED Building Technologies is a thermally resistant, high performance building panel that’s strong, light in weight and energy efficient. Combining the strength and performance of cold-formed steel framing with the superior insulation properties of expanded polystyrene, the accel-E™ STEP wall system simplifies framing, insulation and sheathing to one process. view less
Acous-Tec™ Sound Reducing Liquid Underlayment Patch and Leveler W.F. Taylor Taylor Acous-Tec™ Sound Reducing Liquid Underlayment Patch and Leveler is for all floating floor systems (vinyl plank, laminate, and wood). Taylor Acous-Tec™ is a one component 100% solids, cross-linking modified silane polymer-based liquid underlayment f...view more Taylor Acous-Tec™ Sound Reducing Liquid Underlayment Patch and Leveler is for all floating floor systems (vinyl plank, laminate, and wood). Taylor Acous-Tec™ is a one component 100% solids, cross-linking modified silane polymer-based liquid underlayment formulated to work with all types of floating floor systems (vinyl plank, laminate, and wood) to reduce sound and moisture levels, over both porous and non-porous surfaces. This solvent free, water free, & isocyanate free, non-flammable, easy troweling high strength product is an excellent replacement for rolled felt and rubber membranes used to control sound transmissions with floating floor systems. view less
Airmétic Soya / Heatlok Soya / Polarfoam Soya Demilec Canada Heatlok Soya is a spray foam insulation that gives, in a single application, an engineered building envelope with a high long-term thermal resistance, an excellent air barrier and an in situ vapor retarder. This high performance closed cell rigid polyuret...view more Heatlok Soya is a spray foam insulation that gives, in a single application, an engineered building envelope with a high long-term thermal resistance, an excellent air barrier and an in situ vapor retarder. This high performance closed cell rigid polyurethane foam is used for commercial and residential walls, basements, roofs and below concrete slabs. The product is only applied by certified contractors. Heatlok Soya contains 18% recycled content and helps to maintain good air quality inside buildings. view less
Airmétic Soya+ / Heatlok Soya+ / Polarfoam Soya+ Demilec Canada Heatlok Soya is a spray foam insulation that gives, in a single application, an engineered building envelope with a high long-term thermal resistance, an excellent air barrier and an in situ vapor retarder. This high performance closed cell rigid polyuret...view more Heatlok Soya is a spray foam insulation that gives, in a single application, an engineered building envelope with a high long-term thermal resistance, an excellent air barrier and an in situ vapor retarder. This high performance closed cell rigid polyurethane foam is used for commercial and residential walls, basements, roofs and below concrete slabs. The product is only applied by certified contractors. Heatlok Soya contains 18% recycled content and helps to maintain good air quality inside buildings. view less
Aislhogar Batts in Bags LF Fiberglass Insulation Owens Corning Aislhogar Batts in Bags LF Fiberglass Insulation is available from Owens Corning for the Latin America market. Aislhogar Batts in Bags LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required.
ALCITEK Dalsan Alci Sanayi VE Ticaret A.S ALCITEK is gypsum based, ready to use spray plaster. Single layer, it prepares the surface ready to paint. There is no need to apply finishing plaster on it. ALCITEK can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface h...view more ALCITEK is gypsum based, ready to use spray plaster. Single layer, it prepares the surface ready to paint. There is no need to apply finishing plaster on it. ALCITEK can be directly applied on brick, concrete, aerated-concerete, etc. It has high surface hardness and brilliant appearance. ALCITEK leads to a healthy environment by regulating the moisture, due to it is a breathing material.It is a noncombustible material. Because of the water in its structure, it is a fire retarder. It does not cause mould, bacteria and fungus. view less
Allure Imago KnollTextiles Imago™ Frozen Fabrics incorporate innovative weave structures to create a hard surface material that is both distinctive and timeless. Imago combines the strength and flexibility of resin with the translucency, texture, and color of textiles.
ALPHA System BASF Corporation Spray Polyurethane Foam - Roofing Elastospray 81255, FE348-2.5, Elastospray 81275, FE348-2.7, Elastospray 81285, FE348-2.8, Elastospray81305, FE348-3.0, ALPHA System, Elastospray 81325, FE348-3.2
ALUAFS.F MARINE AFS BORU SANAYI A.S. ALUAFS.F MARINE non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F MARINE is produced from multi-layer aluminium and poly...view more ALUAFS.F MARINE non-insulated aluminium flexible air ducts are specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. Airtight ALUAFS.F MARINE is produced from multi-layer aluminium and polyester, strengthened with high tension hard steel spring wire. ALUAFS.F MARINE has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors. Since having marine certification, it is suitable for use in marine equipments. TECHNICAL PROPERTIES Construction: 3 ply aluminium + 1 ply polyester Available Diameters: 82 mm - 800 mm Temperature Range: -30 °C / +250 °C view less
Amdry Amvic Inc. Amdry panels are a single continuous thermal insulated subfloor assembly that provides outstanding moisture drainage and drying properties.
AP Armaflex Armacell, LLC AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation....view more AP Armaflex Sheet and Roll Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) • AP Armaflex Roll is supplied in 48" wide (1.22m) continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38 and 50mm). Also available in 60" (1.53m) in 1" thickness. Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet & Roll Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex (Damman Saudi Arabia) Armacell, LLC AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is ma...view more AP Armaflex Sheet Insulation is a black flexible elastomeric thermal insulation. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. It is also effective for reducing HVAC noise. • AP Armaflex Sheet is supplied in flat sheets 36" x 48" (.915m x 1.22) in nominal wall thicknesses of 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (3, 6, 10, 13, 19, 25, 38 and 50mm) Retards heat gain and controls condensation drip from chilled-water and refrigeration systems. Efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex Sheet Insulation is -297°F to +220°F (-183°C to +105°C) according to method of application. AP/Armaflex meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex - White Armacell, LLC Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structu...view more Mold resistant AP Armaflex W pipe insulation is a white flexible elastomeric thermal insulation, supplied as unslit tubing in nominal wall thicknesses of 1/2", 3/4" and 1" (13 mm, 19 mm and 25 mm), in popular sizes up to 2-5/8" ID. The closed cell structure of AP Armaflex W prevents moisture from wicking and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, dust free, fiber free and resists mold and mildew. Microban antimicrobial product protection provides added defense against mold on the insulation. AP Armaflex W is engineered for residential and commercial air conditioning and commercial refrigeration applications in which speed and ease of installation are of primary importance, especially in open ceiling facilities. AP Armaflex W is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +220°F (-183°C to +105°C). AP/Armaflex White meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. 25/50 flame and smoke rated up to 2" view less
AP Armaflex Fittings Armacell, LLC Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water a...view more Armacell Fabricated Fittings are the premier prefabricated fittings for Armaflex pipe insulation systems. Together with the Armaflex tubes, they provide complete system integrity for energy efficiency and controlling condensation drip from chilled-water and refrigeration systems. AP Armaflex black fabricated fittings provide thermal protection (0.25 k) and condensation resistance (0.05 Water Vapor Transmission factor), with all other AP Armaflex performance advantages. 1/2", 3/4", 1", 1-1/2" and 2" wall thicknesses for 2-piece and 3-piece 90° elbows, tees and 45° elbows. 1", 1-1/2" and 2" thicknesses for grooved fittings, with couplings. view less
AP Armaflex – Self Adhering Sheets & Rolls Armacell, LLC Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", ...view more Mold resistant AP Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. • Sheets are supplied as flat sheets 36"x 48" (.915m x 1.22m), in nominal wall thicknesses of 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (6, 10, 13, 19, 25, 38, 50mm). • Rolls are supplied in 48" (1.22m) wide continuous rolls in nominal wall thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38, 50mm). It is also available in 60" (1.53m) in 1" thicknesses. The expanded closed-cell structure of Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or CFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP Armaflex SA is used to retard heat gain and control condensation drip from chilled water and refrigeration systems. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range for AP Armaflex SA Sheet Insulation is -297°F to +180°F (-183°C to +82°C). AP/Armaflex SA meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. view less
AP Armaflex – Self Seal Tubes Armacell, LLC Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell...view more Mold resistant AP Armaflex black SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in: • nominal wall thicknesses of 1/2", 3/4", and 1" (13, 19, and 25mm) • popular sizes up to 4" IPS. The expanded closed-cell structure of AP Armaflex makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is also formaldehyde free, low VOCs, fiber free, dust free and resists mold and mildew. All AP Armaflex products are made with Microban® antimicrobial product protection for added defense against mold on the insulation. AP/Armaflex SS meets the energy code requirements of ASHRAE 90.1, ASHRAE 90.2, International Energy Conservation Code (IECC) and other building codes. AP Armaflex SS Pipe Insulation is used to retard heat gain and control condensation drip from chilled-water and refrigeration lines. It also efficiently reduces heat flow on hot systems. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
AP Coilflex Armacell, LLC AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency ...view more AP Coilflex Duct Liner is a patent pending, highly conformable, pliable elastomeric thermal insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. The Microban® antimicrobial protection is registered by the Environmental Protection Agency for use in air ducts (EPA Reg. No. 1258-840-42182). It is added during manufacturing to provide an extra level of defense to the natural mold resistance of AP Coilflex. AP Coilflex is effective for reducing HVAC noise. It is supplied in rolls 46", 47", 48", 56-1/4", 59" and 60" wide, in 1" (or 1/2" special order) thicknesses. It can be applied with current water-based adhesives and pinning per SMACNA requirements or unpinned using Armaflex 520 Adhesives. AP Coilflex Duct Liner, like AP Armaflex Duct Liners, is ideal for air handling systems, VAV units, ducts and other air system components requiring condensation control and resistance to moisture, damage or heat gain. They also reduce noise generated by fans and air movement as well as the rattle or popping of sheet metal air ducts. Coilflex is especially effective factory-applied, including on automated coiling lines, for end use in areas like schools, hospitals, hotels, commercial and public buildings. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
AP Spiralflex Armacell, LLC AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solut...view more AP Spiralflex™ is the first 100% fiber-free, elastomeric duct liner made specifically for spiral ducts. This all-inclusive solution eliminates the need for encapsulating films or heavy dual wall systems. Provides manufacturers a one-step duct lining solution that meets their clients’ requirements for indoor air quality (IAQ), noise attenuation, and thermal efficiency. Made from highly conformable elastomeric foam, AP Spiralflex cuts easily with a sharp knife. Its smooth and flexible backing fits snugly against the duct wall, without the typical gaps that rob conventional insulation systems of their efficiency. Installation is a simple matter of forming a correctly sized AP Spiralflex tube with one glued and taped seam, then inserting it into spiral duct sections. The end result is a more precise insulation application that weighs 20% less than dual wall ducts with fiber-glass. AP Spiralflex is made in Mebane, NC and is available in 48” wide, (nominal) 1” thick rolls. • Meets ASHRAE 90.1-2010 • Meets ASHRAE Standard 189.1 • Meets IECC 2012 • Meets California Title 24 • Meets ASTM E 84 25/50 flame and smoke rating • Made with Microban antimicrobial technology to resist the growth of mold. • GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage view less
AR Series Seal Expansion Joint Systems InPro Corporation At JointMaster®, we protect building appearances by covering up the endless war between buildings and Mother Nature. Our experts engineer joint solutions so that architects don't have to worry about compromised aesthetics.
Arcticflex Nomaco Insulation Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. •...view more Flexible, closed cell polyolefin insulation for piping systems Supplied with PSA closure system. Superior ‘R’ value and water vapor transmission. No residual chlorine from foaming agent eliminates insulation as source of harmful corrosive constituents. • Superior pressure sensitive adhesive seam closure system • Installation over a wide temperature range • Greater joint strength at all operating temperatures • Up to 50% reduction in installation costs over conventional commercial pipe insulation products It is white in color and available in six foot lengths - Sizes 3/8" ID through 4-1/2" ID - Wall thicknesses of , 1/2" and 1". Arcticflex is acceptable for use in duct/plenum applications meeting the requirements of NFPA 90A/90B. view less
Armaflex Endura® Armacell ASIA Pte Ltd Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resili...view more Armaflex Endura® is a laminated foam insulation material purpose-designed for HVAC systems. It is a flexible elastomeric foam (FEF) material that can be easily wrapped around ducts or used as a duct liner with no risk of fibre leakage. With natural resilience against water vapour ingress and built-in antimicrobial protection, it is the preferred choice for commercial, residential and public buildings such as hospitals, schools and elder housing. view less
Armaflex® AD0 Armacell ASIA Pte Ltd Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes ...view more Armaflex® AD0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Specially designed for ducting applications, AD0 is manufactured without the use of CFCs, HFCs and HCFCs and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® AD0 is the preferred choice for effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex AD0 is -50°C to +85°C for flat surface. Armaflex® AD0 is available as sheets, both continuous rolls as well as flat sheets. view less
Armaflex® AMP Armacell ASIA Pte Ltd Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses....view more Armaflex® AMP is a specially formulated insulation material with the patented Armaprene® technology from Armacell. This closed-cell, flexible elastomeric foam (FEF) material offers long-term reliability against water vapour transmission and energy losses. With built-in antimicrobial protection, this fibre-free insulation material helps to offer better indoor air quality. view less
Armaflex® Class 0 Armacell ASIA Pte Ltd Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® Class 0 is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Hence, Armaflex® Class 0 is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® Class 0 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® Class 0 with self-adhesive Armacell ASIA Pte Ltd Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels ...view more Armaflex® Class 0 is a flexible closed-cell elastomeric foam insulation that is also available with a self-adhesive option. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® is free of formaldehyde, dust and fibre, and emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. The MICROBAN® antimicrobial additive, built into the structure of the insulation sheets, would not fade or wash away over time and offers reliable protection against mold and mildew. Armaflex® Class 0 with self-adhesive is a quick and easy-to-install insulation material with excellent condensation control and energy saving performance. The recommended service temperature range for Armaflex® Class 0 sheet is -50°C to +85°C. Armaflex® Class 0 is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® Class 1 Armacell ASIA Pte Ltd Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an effic...view more Armaflex® Class 1 is a flexible closed-cell elastomeric foam insulation, free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs or HCFCs Armaflex® Class 1 emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It is also effective for reducing HVAC noise. Armaflex® Class 1 offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® Class1 is -50°C to +105°C. (+85°C for flat surface). Armaflex® Class 1 is available as sheets – continuous rolls or flat sheets as well as tubes. view less
Armaflex® DS Armacell ASIA Pte Ltd Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® ...view more Armaflex® DS is a premium flexible elastomeric foam insulation material that meets China’s GB8624 Class B fire performance rating. Its uniquely formulated blue color helps end users feel more confident in the authenticity of their purchase. The MICROBAN® antimicrobial additive is built into the structure of the insulation foam, and would not fade or wash away over time, providing reliable protection against mold and mildew growth. Similar to other products in the Armaflex® range, closed-cell Armaflex® DS is the ideal choice for HVAC systems due to its excellent resistance against water vapor ingress and thermal conductivity. Armaflex® DS is available as sheets – continuous rolls and flat sheets as well as tubes. view less
Armaflex® FRV Armacell ASIA Pte Ltd Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with ...view more Armaflex® FRV is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® FRV emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Hence, Armaflex® FRV is the preferred choice for condensation control and energy saving. The recommended service temperature range for Armaflex® FRV is -50°C to +105°C. (+85°C for flat surface). view less
Armaflex® MC Armacell ASIA Pte Ltd Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built...view more Armaflex® MC is a flexible elastomeric foam free of formaldehyde, dust and fibre. Manufactured without the use of CFCs, HFCs and HCFCs, Armaflex® emits very low levels of VOCs. The closed-cell structure makes it an efficient insulation material with built-in resistance against water ingress, without the need for any additional vapor barrier. It also helps with reducing HVAC noise. Armaflex® MC offers effective condensation control, resistance against mold and mildew as well as long-term energy savings. The recommended service temperature range for Armaflex® MC is -50°C to +105°C. (+85°C for flat surface). Armaflex® MC is available as sheets – continuous rolls and flat sheets as well as tubes. view less
ArmaTuff Armacell, LLC ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant fl...view more ArmaTuff is Armaflex insulation with a 10 mil laminated covering membrane (a UV protective white top surface and a puncture-resistant core). The membrane has a 10-year limited warranty against breakdown due to UV radiation. Armaflex is a mold-resistant flexible elastomeric thermal insulation. Its closed-cell structure prevents condensation and moisture wicking, and makes it an efficient insulation. It is manufactured without the use of CFCs, HFCs or HCFCs. It is available in 36” x 48” sheets (with or without pressure sensitive adhesive) and in rolls 48” wide (without PSA), in thicknesses up to 2” ArmaTuff is designed to be used for all exterior applications: Exterior ducts, tanks, vessels, large pipes and fittings. The laminate is resistant to UV, ozone, acid rain and most industrial pollutants. No painting is required. The recommended temperature usage range is -297°F to +180°F (-183°C to +82°C). view less
ASJ Max FIBERGLAS™ Pipe Insulation Owens Corning The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistan...view more The ASJ Max jacket is a durable, cleanable, poly-encapsulated paper jacket that doesn’t support mold or mildew growth. It resists/sheds water when exposed to intermittent, short-duration precipitation during construction. It has a higher puncture resistance and less wicking/curling than standard ASJ. It accepts paint and mastic as well as standard ASJ. The SSL® Max closure system was designed with advanced adhesives to work specifically with the jacket to provide a tight, reliable seal that doesn’t need glue or staples. It provides an outstanding long-term bond as the acrylic adhesive “grows” on the jacket during the 48-hour wet out period. The maximum operating temperature is 1,000°F. It is available in a variety of size/thickness combinations, including select metric sizes, for use with Aquatherm® piping systems. Aquatherm® is a registered trademark of Aquatherm GmbH. view less
Athlon TopLab Base Trespa Athlon is a flat panel based on thermosetting resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure and temperature. Athlon has an integrated, decorative surface with melamine-impregnated paper. Athlon is extra...view more Trespa Athlon is a flat panel based on thermosetting resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure and temperature. Athlon has an integrated, decorative surface with melamine-impregnated paper. Athlon is extraordinarily resistant to scratching, wear, moisture and chemicals and can be cleaned with ease. Trespa Athlon is ideal for several interior applications, such as, wall coverings, restroom partitions, sanitary counter tops, shelving, display units and lockers. view less
Athlon Trespa Trespa Athlon is a flat panel based on thermosetting resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure and temperature. Athlon has an integrated, decorative surface with melamine-impregnated paper. Athlon is extra...view more Trespa Athlon is a flat panel based on thermosetting resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure and temperature. Athlon has an integrated, decorative surface with melamine-impregnated paper. Athlon is extraordinarily resistant to scratching, wear, moisture and chemicals and can be cleaned with ease. Trespa Athlon is ideal for several interior applications, such as, wall coverings, restroom partitions, sanitary counter tops, shelving, display units and lockers. view less
Atmosphere Unfaced Duct Wrap with ECOSE® Technology Knauf Insulation Thermal and acoustical glass mineral wool blanket for use as external insulation on HVAC rectangular or round ductwork.
AttiCat® Expanding Blown-in Loosefill Insulation Owens Corning .
Atticat® Loose Fill Insulation Owens Corning Owens Corning loosefill insulation, also called "blown-in" insulation, is made of virgin PINK™ FIBERGLAS® Insulation and is used in new construction and in older existing homes, typically in hard-to-reach areas. Since fiber glass insulation is non-combust...view more Owens Corning loosefill insulation, also called "blown-in" insulation, is made of virgin PINK™ FIBERGLAS® Insulation and is used in new construction and in older existing homes, typically in hard-to-reach areas. Since fiber glass insulation is non-combustible and non-corrosive by nature. view less
Basement Wall Insulation CertainTeed Corporation Light-density fiber glass blanket with white reinforced polypropylene or reinforced foil facing, both perforated. Intended for unfinished basement walls applied either half or full wall. Comes in 3-1/2 " thick rolls either 48" or 72" wide.
Beno-Therm Benolec Loose fill Cellulose Fiber Insulation
Beyaz COREX Dalsan Alci Sanayi VE Ticaret A.S Beyaz COREX is a regular plasterboard that is used for partition walls, drywall linings and suspended ceilings. Both faces of beyaz COREX are covered with special liner paper that gives flexibility and high strength to the plasterboard. Walls and suspende...view more Beyaz COREX is a regular plasterboard that is used for partition walls, drywall linings and suspended ceilings. Both faces of beyaz COREX are covered with special liner paper that gives flexibility and high strength to the plasterboard. Walls and suspended ceilings made with beyaz COREX are light and flexible. Implementation of Beyaz COREX is fast and easy, so it leads to savings in labor and time, reduces construction costs . The core of beyaz COREX is made from specially calcined high purity natural gypsum that provides lightness, hardness, resistance and workability to plasterboard. view less
BiFlex Cap The Garland Company "BiFlex® Cap contains an average of 8% pre-consumer recycled content"
Blowing Wool Fiberglass Insulation- InsulSafe® SP, TrueComfort®, UltraComfort®, OPTIMA®, InsulSafe® CertainTeed Corporation CertainTeed blowing insulation is made of fiber glass that consists of a high percentage of recycled glass that is noncombustible, noncorrosive and odor-free.
BoardeX roof Dalsan Alci Sanayi VE Ticaret A.S BoardeX roof is a roof board integrated with special white fiberglass mesh on the back surface. It is used instead of OSB or wood under roofing materials such as clay/ concrete tiles and shingles Class A1 noncombustible BoardeX roof is the absolute soluti...view more BoardeX roof is a roof board integrated with special white fiberglass mesh on the back surface. It is used instead of OSB or wood under roofing materials such as clay/ concrete tiles and shingles Class A1 noncombustible BoardeX roof is the absolute solution for noncombustible roofing details.BoardeX roof is the first fiberglass mat coated roof board (Patent Pending),manufactured by Dalsan Alçı, the producer of BoardeX, which has been applied in millions of square meters until today. view less
Bona R580 Bona Moisture barrier sealer optimizes adhesion to, and provides a protective membrane over substrates where the moisture content exceeds 12 lbs. or 85% relative humidity. Bona R580 is a moisture cured, solvent and water free, silane-based compound.
Bona R848 Bona Bona R848 is a one-component, moisture curing, water and solvent free, silane-based adhesive for engineered wood floors. Bona R848 provides outstanding adhesion to a variety of surfaces, and allows for the natural movement of wood flooring.
Bona R850T Bona Bona R850T is a one-component, moisture curing, water and solvent free, silane-based adhesive for wood floors. Bona R850T provides outstanding adhesion to a variety of surfaces, and allows for the natural movement of wood flooring.
Bona R851 Bona Bona R851 adhesive is a new generation silane-based wood flooring adhesive that provides exceptional green grab strength and unsurpassed final shear strength compared to competitive products. Bona R851 is easy to apply, easy to clean and has exceptional g...view more Bona R851 adhesive is a new generation silane-based wood flooring adhesive that provides exceptional green grab strength and unsurpassed final shear strength compared to competitive products. Bona R851 is easy to apply, easy to clean and has exceptional green grab. Water and solvent free, Isocyanate free  and very low VOC's. view less
Bordo COREX Dalsan Alci Sanayi VE Ticaret A.S Bordo COREX is a plasterboard used for partition walls, drywall lining and suspended ceilings where resistance to water , humidity and fire is required. Both sides of bordo COREX is covered by a special red color liner which ensures flexibility and high r...view more Bordo COREX is a plasterboard used for partition walls, drywall lining and suspended ceilings where resistance to water , humidity and fire is required. Both sides of bordo COREX is covered by a special red color liner which ensures flexibility and high resistance. Bordo COREX can be safely used for ensuring resistance to water and humidity in bathrooms, toilets, kitchens, messes, and attics. Bordo COREX can be used for ensuring fire safety in public builings such as schools, hospitals, hotels, trade and business centers. Bordo COREX can be covered by materials such as glazed tile and ceramic . The core of Bordo COREX has been enhanced with special fibers and additives in order to make it resistant to fire and water-repellant additives to ensure resistance to water and humidity. view less
Canadian Basement Blanket Insulation CertainTeed Corporation Canadian basement blanket insulation is a flexible blanket insulation furnished in unfaced rolls. Its primary use is on interior residential basement walls.
Canadian Metal Building Insulation CertainTeed Corporation Fibre glass Canadian metal building insulation is a flexible blanket insulation furnished in unfaced rolls. Its primary use is in exterior walls and standing seam roofing systems of pre-engineered metal buildings.
Canadian Sustainable Insulation Building Insulation CertainTeed Corporation Canadian fibre glass building insulation is intended for use in either residential or commercial construction as thermal and acoustical insulation in ceilings, walls and floors.
Carpet Tile Veils Owens Corning Contractor-grade tiles are used to cover large open floor areas for commercial use and sometimes for domestic Do-It-Yourself applications. Most are manufactured with a secondary-backing layer of veil in a PVC or bitumen or PE/PP substrate. Owens Corning e...view more Contractor-grade tiles are used to cover large open floor areas for commercial use and sometimes for domestic Do-It-Yourself applications. Most are manufactured with a secondary-backing layer of veil in a PVC or bitumen or PE/PP substrate. Owens Corning engineers glass veil for use in this tile manufacturing operation that provides dimensional stability and lifetime cost advantages. view less
Ceiling Veils Owens Corning OCV™ Non-Woven Technologies offers a wide range of glass mats to be used as facers for acoustical ceiling tiles. Our facers can be used on ceiling panels made from glass wool, mineral wool, wet felt, wood fibers and gypsum. Our production process allows u...view more OCV™ Non-Woven Technologies offers a wide range of glass mats to be used as facers for acoustical ceiling tiles. Our facers can be used on ceiling panels made from glass wool, mineral wool, wet felt, wood fibers and gypsum. Our production process allows us to produce glass non-wovens with an optimum fiber distribution which meets the highest aesthetic requirements of the industry. In addition to aesthetic requirements, the company has developed a wide range of products to meet the most demanding acoustical and fire retardant applications. view less
CertainTeed Fiber Glass Insulation White PSK Faced Roll CertainTeed Corporation CertainTeed White PSK Faced Roll is ideal for insulating and sound proofing 2 x 6 stud wall cavities with 24" on center spacing – exterior sidewalls, basement walls, floors, garage walls and metal/post frame buildings. It is also fire rated for exposed ap...view more CertainTeed White PSK Faced Roll is ideal for insulating and sound proofing 2 x 6 stud wall cavities with 24" on center spacing – exterior sidewalls, basement walls, floors, garage walls and metal/post frame buildings. It is also fire rated for exposed applications. The white PSK facing is durable, abrasion-resistant with an all white surface to brighten rooms. This product is available in R-19 rolls. Standard roll width is 24 inches. view less
CertainTeed M2Tech® 90 Setting Compound CertainTeed Gypsum, Inc. A moisture and mold resistant lightweight sandable setting powder used to prefill joints, embed fiberglass mesh joint tape and conceal joints, fasteners and trim accessories on gypsum wallboard. It can also be used for interior patching and repair. Settin...view more A moisture and mold resistant lightweight sandable setting powder used to prefill joints, embed fiberglass mesh joint tape and conceal joints, fasteners and trim accessories on gypsum wallboard. It can also be used for interior patching and repair. Setting time is 90 minutes. view less
CertainTeed Sustainable Insulation CertainTeed Corporation Thermal and acoustical fiber glass building insulation for use in residential and commercial applications. Consists of high recycled and renewable content and a new organic, plant-based bonding agent that has no formaldehyde, acrylics, or dyes added. Avai...view more Thermal and acoustical fiber glass building insulation for use in residential and commercial applications. Consists of high recycled and renewable content and a new organic, plant-based bonding agent that has no formaldehyde, acrylics, or dyes added. Available in many standard widths and R-values and as unfaced or with Kraft, Foil, FSK-25 or smart vapor retarder facings. view less
CertainTeed® LITE Sand Setting Compounds CertainTeed Gypsum, Inc. CertainTeed® LITE Sand Setting Compounds are lightweight sandable chemically setting powders used to prefill joints, embed joint tape and conceal joints, fasteners and trim accessories on gypsum board. They can also be used for interior patching and repai...view more CertainTeed® LITE Sand Setting Compounds are lightweight sandable chemically setting powders used to prefill joints, embed joint tape and conceal joints, fasteners and trim accessories on gypsum board. They can also be used for interior patching and repair. They are ideal for heavy fills because they are specially formulated to harden with very little shrinkage in a prescribed time frame. Setting times are available from 5 minutes to 210 minutes with the products listed below: CertainTeed® LITE Sand 5 CertainTeed® LITE Sand 20 CertainTeed® LITE Sand 45 CertainTeed® LITE Sand 90 CertainTeed® LITE Sand 210 view less
CertaPro® AcoustaTherm™ Batts - Kraft Faced CertainTeed Corporation Light-density fiber glass batts with an integral kraft facing for use in steel stud construction. Enhances both thermal and acoustical performance of exterior and interior walls.
CertaPro® AcoustaTherm™ Batts -Unfaced CertainTeed Corporation Light-density fiber glass batts designed for use in steel stud commercial applications. Noncombustible. Enhances thermal and acoustical performance of exterior and interior walls.
CertaPro® Partition Batts CertainTeed Corporation Unfaced light-density 1-1/2" thick R-5.8 fiber glass batts. Comes 24'"x 48". Enhances thermal and acoustical performance of shaftwalls and low-profile partition walls.
CertaPro® Thermal Batts - Foil Faced CertainTeed Corporation Light-density fiber glass batts with integral foil facing. Has perm rating of 0.05 or less. Sized for commercial construction. For thermal applications.
CertaPro® Thermal Batts - FSK Faced CertainTeed Corporation Light-density fiber glass batts with integral FSK facing. Has perm rating of 0.02 or less. Sized for commercial construction. For thermal applications.
CertaPro® Thermal Batts - Kraft Faced CertainTeed Corporation Light-density fiber glass batts with integral kraft facing. Has perm rating of 1 or less. Sized for commercial construction. For thermal applications.
CertaPro® Thermal Extended Flange Batts - FSK Faced CertainTeed Corporation Light-density fiber glass batts with integral FSK facing featuring 4" stapling flanges. Silver FSK facing provides high-light reflection. For commercial applications.
CertaSpray Closed Cell Foam Insulation CertainTeed Corporation CertaSpray Closed Cell Foam is a medium density sprayed polyurethane foam insulation. It provides thermal insulation for the interior of any building and reduces air infiltration through the building envelope.
CGC Sheetrock® Brand All Purpose Drywall Compound USG CGC Sheetrock® Brand All Purpose Drywall Compound is an excellent compound for joint finishing (taping, filling and finishing). It's ready-mixed formulation is creamy and smooth, giving it excellent slip, bond strength and easy workability.
CGC Sheetrock® Brand All Purpose Lite Drywall Compound USG Weighing up to 15% less than conventional-weight compounds, CGC Sheetrock® Brand All Purpose Lite Drywall Compound is an easy-to-use compound that provides superior working qualities and good open time to ensure the smoothest joints possible. Featuring a ...view more Weighing up to 15% less than conventional-weight compounds, CGC Sheetrock® Brand All Purpose Lite Drywall Compound is an easy-to-use compound that provides superior working qualities and good open time to ensure the smoothest joints possible. Featuring a special formulation, this compound is ideal for embedding tape, filling, and finishing joints, fasteners, bead and trim, and is also excellent for skim coating. view less
CGC Sheetrock® Brand Dust Control® Drywall Compound USG CGC Sheetrock® Brand Dust Control® Drywall Compound goes on the wall as well or better than other leading drywall compounds, with the added value that when sanding most of the dust falls straight to the floor rather than floating around in the air. This a...view more CGC Sheetrock® Brand Dust Control® Drywall Compound goes on the wall as well or better than other leading drywall compounds, with the added value that when sanding most of the dust falls straight to the floor rather than floating around in the air. This all purpose compound is ideal for embedding tape, filling and finishing gypsum panels, bead, trims and fasteners. It can also be used for skim coating over dry and non-glossy surfaces. view less
CGC Sheetrock® Brand Lite-Weight Taping Compound USG Designed for embedding joint tape and trims, CGC Sheetrock® Brand Lite-Weight Taping Compound is formulated to provide great slip, spread, and open time so that the taping procedure can be accomplished quickly and easily. It also features maximum bond and...view more Designed for embedding joint tape and trims, CGC Sheetrock® Brand Lite-Weight Taping Compound is formulated to provide great slip, spread, and open time so that the taping procedure can be accomplished quickly and easily. It also features maximum bond and crack resistance to ensure high performance. All of this comes in a light weight formula which is easy to work with reducing labour costs and improving the quality of the job. view less
CGC Sheetrock® Brand Machine Mud® Drywall Compound USG CGC Sheetrock® Brand Machine Mud® Drywall Compound is an easy-to-use compound that's formulated for crater-free application. Its smooth and creamy consistency provides superior slip and excellent body for taping, filling and finishing drywall joints using...view more CGC Sheetrock® Brand Machine Mud® Drywall Compound is an easy-to-use compound that's formulated for crater-free application. Its smooth and creamy consistency provides superior slip and excellent body for taping, filling and finishing drywall joints using either mechanical or hand tools. view less
CGC Sheetrock® Brand UltraLight Drywall Compound USG Up to 30% less weight than conventional-weight compounds, CGC Sheetrock® Brand UltraLight Drywall Compound is easier to handle, apply, and sand for better productivity. This compound is ideal for embedding tape, filling, and finishing joints, fasteners, b...view more Up to 30% less weight than conventional-weight compounds, CGC Sheetrock® Brand UltraLight Drywall Compound is easier to handle, apply, and sand for better productivity. This compound is ideal for embedding tape, filling, and finishing joints, fasteners, bead and trim. view less
CGC Sheetrock® Brand X-tra Lite™ Drywall Compound USG Up to 35% less weight than conventional-weight compounds, CGC Sheetrock® Brand X-tra Lite™ Drywall Compound is easier to handle and apply and sands very easily for greater productivity. This compound is ideal for filling and finishing joints, fasteners, b...view more Up to 35% less weight than conventional-weight compounds, CGC Sheetrock® Brand X-tra Lite™ Drywall Compound is easier to handle and apply and sands very easily for greater productivity. This compound is ideal for filling and finishing joints, fasteners, bead and trim, and is also excellent for skim coating. view less
CGC Synko® Brand Advanced Finish Drywall Compound USG A specially formulated lightweight compound that's designed for filling and finishing, CGC Synko® Advanced Finish Drywall Compound features superior slip, enabling tools to slide effortlessly over joints. This compound also provides superior ease of handl...view more A specially formulated lightweight compound that's designed for filling and finishing, CGC Synko® Advanced Finish Drywall Compound features superior slip, enabling tools to slide effortlessly over joints. This compound also provides superior ease of handling, good crack resistance with minimal air for less craters or pinholes and is easy-to-sand for an exceptionally smooth and durable finish. view less
CGC Synko® Brand Classic All Purpose® Drywall Compound USG CGC Synko® Brand Classic All Purpose® Drywall Compound features a unique formulation with superior working qualities, good open time, and low shrinkage that results in a smooth and durable finish. This compound is ideal for fasteners, bead, trim and skim ...view more CGC Synko® Brand Classic All Purpose® Drywall Compound features a unique formulation with superior working qualities, good open time, and low shrinkage that results in a smooth and durable finish. This compound is ideal for fasteners, bead, trim and skim coating, and is also excellent for embedding tape, filling and finishing gypsum panel joints. view less
CGC Synko® Brand Classic Finish® Drywall Compound USG Excellent for filling and finishing gypsum panel joints, fasteners, bead, trim and skim coating, CGC Synko® Brand Classic Finish® Drywall Compound features a unique formulation that offers superior slip, good open time, and low shrinkage that results in a...view more Excellent for filling and finishing gypsum panel joints, fasteners, bead, trim and skim coating, CGC Synko® Brand Classic Finish® Drywall Compound features a unique formulation that offers superior slip, good open time, and low shrinkage that results in an exceptionally smooth and durable finish. view less
CGC Synko® Brand Dust Control® Drywall Compound USG CGC Synko® Brand Dust Control® Drywall Compound goes on the wall as well or better than other leading drywall compounds, with the added value that when sanding most of the dust falls straight to the floor rather than floating around in the air. This all p...view more CGC Synko® Brand Dust Control® Drywall Compound goes on the wall as well or better than other leading drywall compounds, with the added value that when sanding most of the dust falls straight to the floor rather than floating around in the air. This all purpose compound is ideal for embedding tape, filling and finishing gypsum panels, bead, trims and fasteners. It can also be used for skim coating over dry and non-glossy surfaces. view less
CGC Synko® Brand Lite Finish™ Drywall Filling and Topping Compound USG CGC Synko® Brand Lite Finish™ Drywall Filling & Topping Compound is a lightweight compound that's specially formulated to provide superior sandability, a smooth finish, and can be applied with hand or mechanical tools. This compound offers good workabilit...view more CGC Synko® Brand Lite Finish™ Drywall Filling & Topping Compound is a lightweight compound that's specially formulated to provide superior sandability, a smooth finish, and can be applied with hand or mechanical tools. This compound offers good workability and a smooth consistency, and is ideal for filling and finishing nail heads, screw heads and trims. Note that this compound is not recommended for embedding tape. view less
CGC Synko® Brand Lite Joint™ Drywall Taping Compound USG Designed for embedding joint tape and applying paper-faced beads and trims, CGC Synko® Brand Lite Joint™ Drywall Taping Compound is a lightweight compound that's ideal for use on most gypsum panels when maximum bond and crack resistance are essential, and...view more Designed for embedding joint tape and applying paper-faced beads and trims, CGC Synko® Brand Lite Joint™ Drywall Taping Compound is a lightweight compound that's ideal for use on most gypsum panels when maximum bond and crack resistance are essential, and provides excellent slip and good open time. This compound can be applied with hand or mechanical tools. view less
CGC Synko® Brand Lite Line™ All Purpose Drywall Compound USG The most widely accepted lightweight product in Western Canada, CGC Synko® Brand Lite Line™ All Purpose Drywall Compound is designed for taping, filling and finishing joints, trims and gypsum panel surfaces, and for skim coating. The light formulation hel...view more The most widely accepted lightweight product in Western Canada, CGC Synko® Brand Lite Line™ All Purpose Drywall Compound is designed for taping, filling and finishing joints, trims and gypsum panel surfaces, and for skim coating. The light formulation helps reduce the physical effort required for application, and provides superior workability, spreadability and sanding with minimum shrinkage. view less
CGC Synko® Brand Redi-Filler™ All Purpose Drywall Compound USG For complete finishing or hand applied simple texturing, CGC Synko® Brand Redi-Filler™ All Purpose Drywall Compound combines single package convenience with excellent taping and finishing. This compound contains vinyl binders and other ingredients that pr...view more For complete finishing or hand applied simple texturing, CGC Synko® Brand Redi-Filler™ All Purpose Drywall Compound combines single package convenience with excellent taping and finishing. This compound contains vinyl binders and other ingredients that provide performance superior to that of ordinary ready-mixed products. It is blended to a creamy, smooth consistency, and offers excellent slip and bond and easy workability, can be used directly from the container, and requires only minimal mixing, thinning and retempering. view less
CGC Synko® Brand UltraLight Drywall Compound USG Up to 30% less weight than conventional-weight compounds, CGC Synko® Brand UltraLight Drywall Compound is easier to handle, apply, and sand for better productivity. This compound is ideal for embedding tape, filling, and finishing joints, fasteners, bead ...view more Up to 30% less weight than conventional-weight compounds, CGC Synko® Brand UltraLight Drywall Compound is easier to handle, apply, and sand for better productivity. This compound is ideal for embedding tape, filling, and finishing joints, fasteners, bead and trim. view less
Commercial Blanket Insulation CertainTeed Corporation Light density fiber glass blanket for thermal and acoustical application in commercial buildings.
Cor The Garland Company Exposed Fastener Metal Wall Panel
Cor-Pan 0.5 and 1.0 IMETCO Exposed Fastener Metal Wall Panel
CR Series Seal Expansion Joint Systems InPro Corporation At JointMaster®, we protect building appearances by covering up the endless war between buildings and Mother Nature. Our experts engineer joint solutions so that architects don't have to worry about compromised aesthetics.
DecoCor Thick Phenolic Core Laminate Panolam Industries International Inc. DecoCor Thick Phenolic Core Laminate is designed for applications where the decorative surface must contribute to the structural stability of the finished assembly. Thick Phenolic Core Laminate is available in the following configurations: decorative both...view more DecoCor Thick Phenolic Core Laminate is designed for applications where the decorative surface must contribute to the structural stability of the finished assembly. Thick Phenolic Core Laminate is available in the following configurations: decorative both sides; decorative one side, glueable one side; glueable both sides. view less
Delta Imago KnollTextiles Imago™ Frozen Fabrics incorporate innovative weave structures to create a hard surface material that is both distinctive and timeless. Imago combines the strength and flexibility of resin with the translucency, texture, and color of textiles.
DESIGNS | Innovative Finishes FRP Panel Crane Composites, Inc. Take your surfaces beyond the tradtional frp white bumpy board. With our DESIGNS resilient wall coverings, bring both style and durability into any commercial space. No need to sacrifice aesthetics for hygiene – Crane DESIGNS offers you endless options to...view more Take your surfaces beyond the tradtional frp white bumpy board. With our DESIGNS resilient wall coverings, bring both style and durability into any commercial space. No need to sacrifice aesthetics for hygiene – Crane DESIGNS offers you endless options to create the look you are envisioning for your walls. view less
DRYTEK® LEVELEX Plus Self Leveling Underlayment Laticrete International DRYTEK® LEVELEX Plus is a high quality, self-leveling, cement-based underlayment designed for use over various substrates, including concrete and tile. DRYTEK LEVELEX Plus formulation provides a highly smooth surface on which sensitive finished floor good...view more DRYTEK® LEVELEX Plus is a high quality, self-leveling, cement-based underlayment designed for use over various substrates, including concrete and tile. DRYTEK LEVELEX Plus formulation provides a highly smooth surface on which sensitive finished floor goods can be installed. DRYTEK LEVELEX Plus can be placed from 1/8-1 1/4" (3-32 mm) in a single lift (consult LATICRETE Technical Services for pea gravel extension installation guidelines). view less
DRYTEK® Moisture Vapor Barrier Laticrete International DRYTEK® Moisture Vapor Barrier is a single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs prior to installing a DRYTEK underlayment.
DRYTEK™ LEVELEX™ Laticrete International DRYTEK™ LEVELEX™ is a cement-based easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile. DRYTEK LEVELEX provides a smooth and flat surface on which sensitive finished floor goods can be insta...view more DRYTEK™ LEVELEX™ is a cement-based easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile. DRYTEK LEVELEX provides a smooth and flat surface on which sensitive finished floor goods can be installed. DRYTEK LEVELEX can be placed from 1/8–3" (3–76 mm) in a single lift. view less
Drywall Partition System KIRII (Hong Kong) Limited Metal Studs are available in 45, 50, 64, 76, 102, 127, 152 & 200mm width
Duct Wrap / Microlite® EQ Formaldehyde-free Johns Manville Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforc...view more Microlite® EQ duct wrap insulation is a brown, formaldehyde-free, light-weight, highly resilient, blanket-type thermal insulation made of glass fibers, bonded with a bio-based formaldehyde-free resin. It is supplied with an FSK (foil-scrim-kraft) reinforced vapor barrier facing. It is designed for the external insulation of HVAC ducts, and is available in a variety of different thicknesses and densities in order to meet installed performance requirements. view less
Duct Wrap / Microlite® XGFormaldehyde-Free Johns Manville Microlite duct wrap insulation is a light-weight, highly resilient, blanket-type thermal and acoustical insulation made of glass fibers, bonded with a white formaldehyde-free resin.
Duct Wrap LF R-5 Owens Corning Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for H...view more Duct Wrap LF R-5 from Owens Corning is available for the Latin American market. The Duct Wrap LF (Low Formaldehyde) product is available for projects where low Volatile Organic Emissions performance is required. The Duct Wrap LF product is available for HVAC systems used in hospitals view less
DuPont Enviro-Bond® Carpet Pad Adhesive E.I. du Pont de Nemours and Company DuPont Enviro-Bond Carpet Pad Adhesive is a fast tacking, latex-based synthetic rubber adhesive, formulated to bond carpet padding to floors to facilitate the installation of carpet. This product has good initial tack and high strength to prevent movement...view more DuPont Enviro-Bond Carpet Pad Adhesive is a fast tacking, latex-based synthetic rubber adhesive, formulated to bond carpet padding to floors to facilitate the installation of carpet. This product has good initial tack and high strength to prevent movement of padding during stretching or subsequent use. Visit www.flooringadhesives.dupont.com view less
DuPont™ Enviro-Bond® Evr-White Premium Sheet Goods Adhesive E.I. du Pont de Nemours and Company DuPont™ Enviro-Bond Evr-White Premium Sheet Goods Adhesive is a non-staining, solvent free, low odor adhesive used for the interior installation of all brands of resilient felt backed sheet goods, except those with a vinyl backing. Extensive lab tests sho...view more DuPont™ Enviro-Bond Evr-White Premium Sheet Goods Adhesive is a non-staining, solvent free, low odor adhesive used for the interior installation of all brands of resilient felt backed sheet goods, except those with a vinyl backing. Extensive lab tests show that Evr-White Sheet Goods Adhesive will not contribute to discoloration of stain-sensitive paperback and “mineral-back” sheet goods designed for conventional, full spread installation. While Evr-White Sheet Goods Adhesive will not cause staining or discoloration, it cannot prevent discoloration from other sources such as air, ultraviolet rays, tannin (present in Western Cedar), spills, dyes, or other chemical, or from the inherent instability of the floor covering. The adhesive has excellent moisture resistance- up to 5.0 lbs./ 1000 sq. ft./24 hours as measured by an anhydrous calcium chloride test according to ASTM F-1869 test method. Visit www.flooringadhesives.dupont.com view less
DuPont™ Enviro-Bond® General Multipurpose Adhesive E.I. du Pont de Nemours and Company DuPont™ Enviro-Bond® General Multi-Purpose Adhesive is a latex-based economy grade floor covering adhesive developed for the installation of many types of carpets and sheet goods designed for direct glue down excluding those with vinyl backings. This prod...view more DuPont™ Enviro-Bond® General Multi-Purpose Adhesive is a latex-based economy grade floor covering adhesive developed for the installation of many types of carpets and sheet goods designed for direct glue down excluding those with vinyl backings. This product is freeze-thaw stable, easy to spread, and has ample open time, a strong wet tack, and a permanent water resistant bond. Do not use outdoors. Visit www.flooringadhesives.dupont.com view less
DuPont™ Enviro-Bond® Premium Multipurpose Adhesive E.I. du Pont de Nemours and Company DuPont™ Enviro-Bond® Premium Multi-Purpose Adhesive is a solvent free, nonflammable, latex based adhesive used for the interior installation of a wide variety of flooring materials. The product provides a strong bond, has excellent open time, wet tack and...view more DuPont™ Enviro-Bond® Premium Multi-Purpose Adhesive is a solvent free, nonflammable, latex based adhesive used for the interior installation of a wide variety of flooring materials. The product provides a strong bond, has excellent open time, wet tack and high ultimate strength. Do not use outdoors. Visit www.flooringadhesives.dupont.com view less